[CFW]Code:Shadow 1.5 C6v40.0.021 for 5530,5800,5233,5230,X6 - July 5, 2011

lapaGayoo · Jan 17, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

sir drigz ngstart po ako magflash,nga pla its my first time to do this to my phone 5530xm,kaso first step plang po me ngkakaron n ng error,pagopen ko ng pkey after i press the "go" may error...kc po windows 7 ang os ko sir..may kaso po ba yun??

khieltrillo · Jan 17, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

ser tanung lang po
gamit ko po ngayun yung 5800 ver 51
pwede bang iflash ko ng ver 52?

sGnj · Jan 17, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

lapaGayoo said:
sir drigz ngstart po ako magflash,nga pla its my first time to do this to my phone 5530xm,kaso first step plang po me ngkakaron n ng error,pagopen ko ng pkey after i press the "go" may error...kc po windows 7 ang os ko sir..may kaso po ba yun??

sir PKEY and JAF key error po tlga when ur running windows 7 OS
just encountered this when i first flashed my 5800..

this is the solution pra mapagana m sa windows 7 ang both applications..

right click the program>properties>click compatibility tab>check "run this program in compatibility mode for:" select windows XP (service pack 3) then sa Privilige Level>check the box "Run this program as an administrator then click apply

sana makatulong sayo..windows 7 dn po pala OS ko :thumbsup:

Gacblue · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

thanks!
dito flash mode

174

lapaGayoo · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

kua sgnj. .pti ba sa pkey gagawn ko din ung paggply opening via sp3 compatibility..sana matulungan mo ako kua. .newbie kc me sa pagppflash gusto ko na iflash cp ko.for better performance...highly appreciated mga sir..thanks

sGnj · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

lapaGayoo said:
kua sgnj. .pti ba sa pkey gagawn ko din ung paggply opening via sp3 compatibility..sana matulungan mo ako kua. .newbie kc me sa pagppflash gusto ko na iflash cp ko.for better performance...highly appreciated mga sir..thanks

uu lahat ng application.. JAF at PKEY

tapos pag ioopen m n ung OGM_JAF_PKEY_Emulator_v3 or OGM_JAF_PKEY_Emulator_v 5 right click m ung application tapos "run as administrator" den press "go" makikita mo dun sa logs na gmgna na sya and then mag open na ung JAF automatically wait mo lng tapos un n follow m n instructions n sir drigz sa pg flash :thumbsup:

goodluck

ako din newbie lng ako sa pgflash ung cp ko 1st time ko lng un iflash hehe and success nmn :dance:

shinive · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

Saw this sa isang site.. lupet ng cfw na ginawa niya, daming added characters..

Possible ba ito sa cfw natin, and yung makakareceive ba niyan eh, lalabas din yung ganyang character sa phone niya kapag binasa niya yung message?

badvlad · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

pm.sent sir drigz

huggybear · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

shinive said:
Saw this sa isang site.. lupet ng cfw na ginawa niya, daming added characters..

Possible ba ito sa cfw natin, and yung makakareceive ba niyan eh, lalabas din yung ganyang character sa phone niya kapag binasa niya yung message?

pwede yan. Use fontrouter. Pagdl mo ng font na gagamitin mo may kasama un na symbols. Save mo nlang sa notepad ng cp mo. Tip ko sayo don't use xplore sa pagextract ng font para sa fontrouter. Mabbrick cp mo pagginamit mo yung font. Sa pc mo xtract.

lapaGayoo · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

sir sgnj. .goodnews done!!success ang flashing,,as of now. .survey survey muna tingnan ko bagong specs ng cp ko...hehe :clap:

thanks you din po sir drigzz!! :salute:

prhenz09 · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

boss drigz fully working tong thread mo sa 5230 ko!!! salamat!!!
patulong nmn open line 5230 ko pls simlock kc sa smart eh!
gusto ko mag globe!!!

yethzsymbian · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

shinive said:
Saw this sa isang site.. lupet ng cfw na ginawa niya, daming added characters..

Possible ba ito sa cfw natin, and yung makakareceive ba niyan eh, lalabas din yung ganyang character sa phone niya kapag binasa niya yung message?

Possible yan sa CFW ni drigz, gagamit ka lang ng TTF Font na my logos na ganyan kasi di mo yan makikita kung di supported ng font na gamit mo, at di rin yan makikita sa papa-dalhan mo ng mensahe kung yung font nya gamit ay walang additional logos/characters..

huggybear said:
pwede yan. Use fontrouter. Pagdl mo ng font na gagamitin mo may kasama un na symbols. Save mo nlang sa notepad ng cp mo. Tip ko sayo don't use xplore sa pagextract ng font para sa fontrouter. Mabbrick cp mo pagginamit mo yung font. Sa pc mo xtract.

Add lang ako ng kunting info,
puedi sa phone pa rin i-extract ang TTF Font kung gagamit ka ng WinRAR 1.01 or FreeUnRAR symbian apps.. :salute:

if na-brick mo ang phone mo dahil x-plore ang ginamit sa pag-extract ng ttf font, unplug your MMC and turn it ON then re-insert your MMC via HOTSWAP, remove the ttf fonts kung saan you nilagay..

(assuming ang TTF Font ay sa E:\Data\Fonts or E:\Resource\Fonts , ini-extract...)
I advise to install the font in your MMC wag sa phone mem C:
dahil format lang solusyon nyan pag di na nag-boot CP mo..

Salamat at sanay nakatulong :salute:

lapaGayoo · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

mga sir pa help nman po...tpos na po me magflash ngaun..kaso hindi po me mkpagplay ng music ko ...ano po ba ang dapat kong gawin mga sir...sana po matulungan niyo ako..maraming salamat po..

dave36 · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

ilang oras battery life ng phone nyo gamit ang CFW ni sir drigz?

ilovenoodles21 · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

lapaGayoo said:
mga sir pa help nman po...tpos na po me magflash ngaun..kaso hindi po me mkpagplay ng music ko ...ano po ba ang dapat kong gawin mga sir...sana po matulungan niyo ako..maraming salamat po..

sa mmc mo na E: gawa ka ng folder na music

example E:/Music <---- jan mo ilalgay ang sound files mo

dave36 · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

Code:

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.29.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type: 
FILES SET FOR FLASHING:
MCU Flash file: E:\5800\5800 firmware\RM-356_52.0.007_prd.core.C0r
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type: 
FILES SET FOR FLASHING:
MCU Flash file: E:\5800\5800 firmware\RM-356_52.0.007_prd.core.C0r
PPM Flash file: E:\5800\5800 firmware\CodeVelocity3-c6v20.0.042-5800.RM-356.rofs2.V20
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type: 
FILES SET FOR FLASHING:
MCU Flash file: E:\5800\5800 firmware\RM-356_52.0.007_prd.core.C0r
PPM Flash file: E:\5800\5800 firmware\CodeVelocity3-c6v20.0.042-5800.RM-356.rofs2.V20
CNT Flash file: NONE
APE Variant file: E:\5800\5800 firmware\RM-356_52.0.007_026_000_U01.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Not found!!!
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
No write data, skiping write...
Sending RAW loader...
Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..................PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
...........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 673, APE blocks: 0
Erasing cmt...
Processing E:\5800\5800 firmware\RM-356_52.0.007_prd.core.C0r...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
Partition result: 0014
Processing E:\5800\5800 firmware\CodeVelocity3-c6v20.0.042-5800.RM-356.rofs2.V20...
Erasing cmt zone 02C80000 - 09D5FFFF ... Erase result: 0000
Processing E:\5800\5800 firmware\RM-356_52.0.007_026_000_U01.uda.fpsx...
Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing E:\5800\5800 firmware\RM-356_52.0.007_prd.core.C0r...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... 
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing E:\5800\5800 firmware\CodeVelocity3-c6v20.0.042-5800.RM-356.rofs2.V20...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing E:\5800\5800 firmware\RM-356_52.0.007_026_000_U01.uda.fpsx...
No write data, skiping write...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V ICPR72_10w25.3
11-10-10
RM-356
(c) Nokia
APESW: V 52.0.007
VariantSW: V 52.0.007 
Prodcode: 0573787
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 7 seconds...
Done!
Done!

lardigene · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

sir iisa lng ba homescreen neto?
and qwerty keyboard lng ba ang mggmit?

sGnj · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

lapaGayoo said:
sir sgnj. .goodnews done!!success ang flashing,,as of now. .survey survey muna tingnan ko bagong specs ng cp ko...hehe
thanks you din po sir drigzz!!

congrats

yethzsymbian · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

lardigene said:
sir iisa lng ba homescreen neto?
and qwerty keyboard lng ba ang mggmit?

2 styles homescreen
with widgets
and clock, date, profile only
mini qwerty, full qwerty, alpha numeric and handwriting..

dave36 · Jan 18, 2011

Re: [CFW][12-31-10]Code:Velocity 3 C6v20.0.042^5530(RM504),5800(RM356),5230(RM588)

subok mode hehe wala gaanung bug pero may mga slow downs hehe

[CFW]Code:Shadow 1.5 C6v40.0.021 for 5530,5800,5233,5230,X6 - July 5, 2011

Novice

Amateur

The Patriot

Attachments

Apprentice

Novice

The Patriot

Proficient

The Fanatic

Professional

Novice

Recruit

The Devotee

Novice

The Devotee

Amateur

The Devotee

Recruit

The Patriot

The Devotee

The Devotee

Similar threads