CM FLARE..deadboot >>>QpST restart solution!! COMPILATION

[frincejay]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

di ko ma install ang qpst xp service pack2 32bit user po ako...laging application failed pag ioopen ko ang emmc download.

 

[droiduser]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

pa bm po.. tnx..

 

[lyrdebren]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

problema pa rin ang error sa failed. Cookie

 

[chumeneh5]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

Tanong lang po , is there any solution kapag nag show yung "reset for entry qpst" then I tried connecting it on my pc.. tapos may luambas na i format daw po ...


I thought ganun lang ung gagawin and I clicked it ... then nung tinanggal ko sa saksakan ung CP ko , and tried to connect it again , hindi na siya nadedetect ng PC and kahit charge hind niya na magawa ..


i hope may solution kayo sa ganitong problem . salamat po

 

[theGREATS]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

CREDITS AND salamat sa original threader nito!!!!!!!!!!!!!!!

GUSTO KO LANG MAKATULONG!!!!!!!!!! BECAUSE I experience the same kind of problem recently

QPST PROBLEM CM FLARE SOLUTION

follow lang po ninyo ung steps na yan ayan din po ung ginawa ko sa flare ko ung na deadboot po xia pde din po yan sa hard brick as long as na dedetect pa xia nang computer


Follow this guide carefully and you can revive your dead Karbonn A9+/ CM Flare after Jelly Bean Upgrade.

Tools Needed:

Dead Phone (When u connect to PC it should install Qualcomm HS-USB QD Loader 9008 Driver) http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar
QPST.2.7.399 http://www.mediafire.com/download/iq7de51esjl6yja/QPST-2.7.399.rar
Flare Revival kit Link http://www.mediafire.com/download/29q1dg6a2x91gyi/FlareRevival.rar
PC with 32 bit Windows (XP/Vista/7/8) (64bit casus problem in QPST installation)

Connect ur phone to PC and let the driver install
Install QPST
http://img546.imageshack.us/img546/7572/aix.png



Open QPST Configuration (in Win XP compatibility mode) ->Add new port -> Select the com port of your device ->exit.

http://img706.imageshack.us/img706/6631/so4f.png
http://img823.imageshack.us/img823/4237/nfa.png
http://img42.imageshack.us/img42/1158/doq.png
http://img839.imageshack.us/img839/341/kys5.png




Go to Start -> All Programs -> QPST eMMC Software Download open the tool -> Check program boot loaders -> Browse for the device com port

http://img841.imageshack.us/img841/1743/gtaq.png



Extract Flare Revival Kit on desktop
If Phone is not detected , Click Browse
http://img15.imageshack.us/img15/3433/b9u.png
http://img594.imageshack.us/img594/4720/gvw.png


In flash programmer file name type MPRG8X25.hex -> in Boot Image type 8X25_msimage.mbn in SPC ->000000
http://img89.imageshack.us/img89/9463/fguj.png

Click Load XML def and browse for rawprogram0.xml in Flare Revival Kit
http://img839.imageshack.us/img839/7879/t7ag.png

Click Load Patch def and browse for patch0.xml
http://img23.imageshack.us/img23/9462/opw3.png
Check the search path 2 and browse for the folder flare repair files
http://img546.imageshack.us/img546/738/70do.png

Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
http://img191.imageshack.us/img191/2723/d9p.png



ALTERNATIVE PROCEDURE


Solution For Deadboot


Download first this Files bago tayu mag simula

QPST 2.7 build 399 -
http://www.mediafire.com/download/8f5546c8ckw5s70/QPST-2.7.399.rar


JB drivers -
http://www.mediafire.com/?8dbfehhtb8ak328http://www.mediafire.com/?8dbfehhtb8ak328

Jelly Bean BP Firmware
http://www.mediafire.com/?1axjuk693fcrbza



WARNING : Supported ito sa mga flare na nadedetect pa ng Pc if hndi ito ma detect sa pc dont do this anymore

Install QPTS (alam ko pamilyar kayo jn.. ginagamit yan sa mga broadband stick..)
install lahat ng drivers para walang aberya


Install drivers

1. Connect deadboot flare to PC / Laptop.

2. Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. If the item is there, you are done with driver install. If it does not exist, proceed to step3.

3. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown Device

4. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.

5. It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.

Run QPST and reprogram EMMC (dito tayu mag sisimula)

1. Run EMMC SOFTWARE DOWNLOAD.

2. Press BROWSE, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD. Press OK.

3. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.

4. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hex

5. Under BOOT IMAGE, enter 8X25_msimage.mbn

6. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.

7. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPEN

8. PRESS DOWNLOAD



9. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. Check the flare, it will show RESET FOR ENTRY QPST.


10. Exit EMMC SOFTWARE DOWNLOAD. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.

11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked


PROCEDURE 3

GO TO THIS LINK!!!

https://www.facebook.com/media/set/?set=a.451139748289143.98869.390023244400794&type=3

panu po gawin ito (Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.)

 

[danrolfde911]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

TS help po yung cm flare s100 ko ayaw na mag bukas di narin nag charge nag palit narin ako ng mga cable wlang tlga eror lang lumalabas sa devicemanager unknown ang lumalabas my TUT po ba d2 TS maraming salamat .

 

[earl lang]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

ayaw mabuksan ng emmc software download FAILED TO CONNECT daw tulong naman please!!

 

[tunesmasig]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

TS pahelp naman, pede ba kaya tong tutorial mo at mga flashing tools mo dito sa flare s100 ko, ndi naman daw deadboot sabi kundi bootlop naman daw. Pag chinarge ko meron lumabas na logo lang pagtumagal mawawala na.. Ndi ko pa nasubukan kung nadedetect pa ng pc to... Pahelp TS dito...

 

[j0hn_6]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

mga boss, meron na bang solution sa cookie error?

dead boot po flare ko, naglowbat lang then ayaw na mag-on.

 

[kareni]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

mga boss pano po pag yung emmc software download
ay failed to connect to server? S100 po yung akin na inaayos ko.

Salamat po! yung alternative solution yung ginawa ko.

 

[zidacmoloi]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

pwede po ba to sa flare 2x..??thanx

 

[tonyxboy03]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

panu kuya pg dna nadedetect ng pc/laptop ung flare??anu ggwn??
fb po..asap..tnx po

 

[imkelz]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

kulang tut mo sir buti may nahanap ako na kumpleto thanks parin...

kung kulang to pa link nman ng complete .. need ko dn kse Thanks ^_^

 

[bobixcube]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

Cge poh wait aku..kc na etry kuna yan kagabe n0t recieve cokies ang sinabi eh

download mo ung jb bp firmware tapos gamitin mo ung emmc na application, tapos download mo sa phone mo ung firmware using emmc, magic, pag tanggal ng bat tapos salpak mo ulit gagana na yan.

 

[ugetsuasari]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

Mga Sir/Ma'am
nireboot ko lng po ung Flare ko then ayaw na po nya magbukas kahit po charging ayaw na din po ...sa tingin ko HARDBRICK po siya kase hindi na din po nag oopen ung ENTRY QPST DOWNLOAD and Recovery mode .. tatry ko po sna ung step na to .. Win 7 Professional gamit ko pong pc Hindi po nadedetect ung Qualcom 9008 Ano po ba ang dapat kong gawin ? TIA.

 

[devil_ice2004]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

yung kakilala ko po dead boot din ang s100 nya... matry nga po baka sakaling gumana..

 

[lom2mel]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

compatible po ba ito sa usb otg kasi gusto i ko bumili ng portable 500 gb usb disk? yung ibang unit ba ng cherry mobile ay compatible din tulad ng cherry mobile burst 2.0? help please. thanks

 

[thorsky23]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

mga sir pahelp naman po cherry mobile flame ko nasira nagkamali kasi ko ng pag cucustom kaya ngaun nag stock na lang sya sa vibrate kada bukas ko. anu po ba pwede kong gawin? salamat in advance po mga tropa.

 

[Jiggz_saw]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

Pde na ba pang flare 2x yan..

 

[ph0x]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

mga sir pahelp naman po cherry mobile flame ko nasira nagkamali kasi ko ng pag cucustom kaya ngaun nag stock na lang sya sa vibrate kada bukas ko. anu po ba pwede kong gawin? salamat in advance po mga tropa.

mas madaling ayusin yang sayo. kc soft brick lng po yan. try mo yang method ni TS. magiging ok yan. mahirap ayusin ung may mga cookie error. i've done all except JTAG. JTAG n yta tlga ang pag asa pag cookie error e. Goodluck boss. KAYA mo yan.

- - - Updated - - -

Mga Sir/Ma'am
nireboot ko lng po ung Flare ko then ayaw na po nya magbukas kahit po charging ayaw na din po ...sa tingin ko HARDBRICK po siya kase hindi na din po nag oopen ung ENTRY QPST DOWNLOAD and Recovery mode .. tatry ko po sna ung step na to .. Win 7 Professional gamit ko pong pc Hindi po nadedetect ung Qualcom 9008 Ano po ba ang dapat kong gawin ? TIA.

natry mo n ba mag install ng proper drivers for your flare? try mo muna un. if nde tlga madetect, na'ko. d ko n alam ang gagawin. Goodluck.