Compilation of Question for Dv-235t

[ngorn22]

Nice thread

 

[madmac]

1. paano ba nakakapag upgrade ng firmware version?
2. kunwari ako ay nasa v8 at gusto ko mag v7 ano ang gagawin?
3. V7 and below to v8? paano ang ginagawa?
4. Bawat version ba nagbabago ang password ng gui at telnet?
5. bukod sa tools paano ang tamang change mac ng dalawang network? through Telnet ba yan?
6. May nakita ako firmware SMART ang nakalabel, pag ganyan ba, nagagamit parin sa Globe?
7. Nababago ba ang pass sa GUI and telnet? through telnet? through GUI?



salamat.

 

[dguitarist08]

ts may tanong lang ako...

nag downgrade ako v8 to v4 gamit an winspreader

pagkatapos indi na ko makakonek sa lan..

pagtingin ko sa ip 169 na siya.

pero pede ako makakonek sa wifi.

anu an dapat kong gawin para mabalik yun lan ko..

Ganyan din nangyari skin ts. Ginamit ko muna ung wifi. After half day, pagkatapos kong mabasa ang buong thread na to, nung i-check ko ulit, ok na ung LAN.

Ang issue na lang ay, kung d p sya connected, blinking ung signal LEDs. Pero pag connected na, nawawala na. My pwede kayang gawin d2?

ask lang po is their a way para maayos signal lights ng dv235t. nagdowngrade ako. ngayon wala na signal lights nya... wifi light lang ang naka on.......

Parehas tau ts. Pero sakin, working fine naman ang connection. Ung ilaw lang ang wala kung connected na sya.

 

[Kimm321]

Guys, observation ko lang ngayon new update ng mybro, kapag nagpalit ako ng firmware from 1.0.4 to 1.0.7 (or vice versa) nagiiba yung WAN IP ko. Parang hindi consistent. Medyo nakakalito kung same din siya lalo na mag snipping.

 

[idigit12212484]

bakit po walang napapakita na WIMax button at Upgrade pag input ko sa browser ung 192.168.15.1... ang meron lng po sa taas status,personalization,networking,mangement..pls help me

 

[lucian019]

TS ask lang about my dv pinapahirpan ako ni2 hahaha dati v8 xia so downgrade ko using winspreader to v4 then v7 ok nmn npapalitan k na ung mga mac problema connecting kc para mhina signal ni smart d2 kainis so ng plan ako i winspreader using bm622M na firmware so nangyari ngkaroon nang vintage issue gang naayos ko nmn nkapasok n dn s gui ang nging problema ko nmn ngyn is bat bigla n lang xiang nag re2start ndi k 2loy mplitan nang mac p help po boss sira n ba to?

 

[kenneth01]

same here davao area .. always connecting then disconnected then conneceting na naman.. maintenance ba ang gantong sign?

 

[mcbrel]

Help naman po. Hindi kasi ako makaconnect sa wifi gamit tong dv-235t. Nakakaconnect naman ung phone ko sa ibang wifi pero pag connect ko sa dv-235t nag authentication problem. TIA !

 

[virus80]

mga sir pnu mag enble ng port 443 sa dv kc na uncheck ko po at hnd ho ma aceses ung
https ng dv ko, salamt po sa sagot mga master

 

[thenoname15]

TS wan max address lang ba tlaga ang babaguhin para ma reconnect ung mybro dv-235t ?
nalilito ako hehe..
sory newbie here

 

[howlingdoc11]

nagnanahanap ako ng seller ng dv235t...

 

[ronsev08]

patulong po pano po ibalik sa dati yung mybro wimax ko na dv 235t naka plan po ako ng 999 kaso d ko ma open ung user interface niya..pano po ang gagawin..

 

[dj jack]

HELP HELP HELP


Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX MAC Re-Init Reason Code = 205, Reason = abort: Rx RNG-RSP with abort status"
Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to UNINITIALIZED
Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX device state transition from UNINITIALIZED to READY
Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to SCANNING
Nov 16 10:33:41 mt71x9 daemon.info [WMXD]: WiMAX device state transition from SCANNING to READY
Nov 16 10:33:43 mt71x9 daemon.info [WMXD]: WiMAX WAN is down, auto-reconnect WiMAX !!
Nov 16 10:33:44 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to CONNECTING
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from CONNECTING to READY
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: RSSI = -74.39 dBm, CINR R1 = 17.30 dB, CINR R3 = 25.31 dB, TX Power = 27 dBm, TX PER = 0 %, RX PER = 0 %
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX MAC Re-Init Reason Code = 205, Reason = abort: Rx RNG-RSP with abort status"
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to UNINITIALIZED
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from UNINITIALIZED to READY
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to SCANNING
Nov 16 10:34:01 mt71x9 cron.notice crond[1723]: USER root pid 6918 cmd /etc/init.d/sp autoconnect
Nov 16 10:34:06 mt71x9 daemon.info [WMXD]: WiMAX device state transition from SCANNING to READY
Nov 16 10:34:08 mt71x9 daemon.info [WMXD]: WiMAX WAN is down, auto-reconnect WiMAX !!
Nov 16 10:34:09 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to CONNECTIN

 

[PureWilkyns]

HELP HELP HELP


Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX MAC Re-Init Reason Code = 205, Reason = abort: Rx RNG-RSP with abort status"
Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to UNINITIALIZED
Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX device state transition from UNINITIALIZED to READY
Nov 16 10:33:35 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to SCANNING
Nov 16 10:33:41 mt71x9 daemon.info [WMXD]: WiMAX device state transition from SCANNING to READY
Nov 16 10:33:43 mt71x9 daemon.info [WMXD]: WiMAX WAN is down, auto-reconnect WiMAX !!
Nov 16 10:33:44 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to CONNECTING
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from CONNECTING to READY
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: RSSI = -74.39 dBm, CINR R1 = 17.30 dB, CINR R3 = 25.31 dB, TX Power = 27 dBm, TX PER = 0 %, RX PER = 0 %
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX MAC Re-Init Reason Code = 205, Reason = abort: Rx RNG-RSP with abort status"
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to UNINITIALIZED
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from UNINITIALIZED to READY
Nov 16 10:34:00 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to SCANNING
Nov 16 10:34:01 mt71x9 cron.notice crond[1723]: USER root pid 6918 cmd /etc/init.d/sp autoconnect
Nov 16 10:34:06 mt71x9 daemon.info [WMXD]: WiMAX device state transition from SCANNING to READY
Nov 16 10:34:08 mt71x9 daemon.info [WMXD]: WiMAX WAN is down, auto-reconnect WiMAX !!
Nov 16 10:34:09 mt71x9 daemon.info [WMXD]: WiMAX device state transition from READY to CONNECTIN

same tayo bro.. bakit kaya

 

[dj jack]

same tayo bro.. bakit kaya

bat kaya ganyan =_=
Antagal na

need an answer

 

[jeffpar0721]

search mo si Backdoor by gatasnachix(not exact)

 

[yhubzi]

pasubscribe po sir

 

[lekiz121]

bat kaya ganyan =_=
Antagal na

need an answer

hmmm live mac ba po yan sir ?


heres a big hint

wag kayo mag reconect pag gabi kasi di yan tatanggapin ni smart bsta puno ang tower


ma fufull kasi yan.

 

[rammel22]

very useful ito ts,kaya up ko to.

 

[michaelborton]

paano to kasymb, hindi ako mka-upload ng pem & key sa DV-235T?