FIX your Tablet using Tools, Flash w/ Guide + ROMs + Backup!

[shervenremviz]

Problem : Android stock Boot Logo ( Looping )
Model : SKK Cyclops 3 with TV
Android Version : Jelly Bean 4.2
Build Number :
USB Debugging : not sure kung naka ON or OFF. kasi parang na ON ko ata...

need po sana backup ng phone para ma-restore...salamat po...

 

[angel424]

Re: ROM / Firmware Compilation for China Tablets + GUIDE

salamat sir d2

 

[shervenremviz]

Re: ROM / Firmware Compilation for China Tablets + GUIDE

up ko lang to boss

Problem : Android stock Boot Logo ( Looping )
Model : SKK Cyclops 3 with TV
Android Version : Jelly Bean 4.2
Build Number :
USB Debugging : not sure kung naka ON or OFF. kasi parang na ON ko ata...

need po sana backup ng phone para ma-restore...salamat po...

 

[Blacklights]

Pahelp naman po
Need firmware for iRobot 8 in ics tablet

A13
BCL HZ802 ung board

Thanks po

 

[mattbautista1020]

Sir I need HAIPAD AIR STOCK ROM

SIR CNO PO sa inyo meron stock rom ng haipad air ang specs po nia is A31S QuadCore Chipset 7 inches,sun6i po madami na ako na try na pang A31s nde compatible and minsan na install kaso nde gmana touch screen nid po tlga is un Stock rom sa knya HAIPAD AIR PO ULIT SALAMAT SA MAKAKATULONG IN ADVANCE!!!!BADLY NEEDED

 

[rcypro]

Re: ROM / Firmware Compilation for China Tablets + GUIDE

TS tanong ko lang yung bang dual cam mapan mx913 na firmware pang lahatan na bang firmware kahit ang tablet na gamit ay 9.7 inch ok lang ba yun? nahihirapan kasi ako magflash ng coby mid9740 wala akong makitang image file kahit anong search ko sa google tapos ngayon nagkamli pa ako ng flash ibang firmware image pala nagamit ko hindi compatible pang 7 inch. TS patulong naman po anong kailangan kong gawin pati narin sa mga marunong about flashing. TIA

 

[franks05]

Pwede ba install ang livesuit kahit hindi run as admin kc nagrerent lang aq ng pc?

 

[Trevor Static]

Re: ROM / Firmware Compilation for China Tablets + GUIDE

Problem: Android 4.0 stuck boot logo
Model / Model Number:ANDROID SHARE 7 TABLET MID 7500/ ARM Cortex-A-8 1GHz-1.5GHz
Android Version: 4.0
Build Number:
USB Debugging: Off

Nag flash Na poh aq piro hinde po nag popop up ang livesuit sa pc q..cnunud qna poh ung tut..????

 

[franks05]

pwede rin ba ung phoenixcard ayaw kc gumana ung livesuit

 

[darkinvader]

Thanks for this tutorial Sir! Keep on sharing! This help us alot,.

 

[shakuramaru10]

Re: ROM / Firmware Compilation for China Tablets + GUIDE

Sir I hope active pa rin po kayo sa pag assist. Kung oo salamat po in advance.


Problem: Samsung boot logo loop
Model / Model Number: GT-P1000
Android Version: Hindi ko po alam sir nabili ko lang po ito walang box sorry po. Made in Korea po ito. Hindi ko po napansin yung Android version nung ayos pa.
Build Number: unknown
USB Debugging: Off, hindi ma sync sa Kies

gusto ko po sana ma installan ng firmware na tama para dito kahit ano lang po basta mapagana. salamat po ulit sir.

 

[rheni]

help; samsung galaxy tab 3 korea pano po mag flash ng firmware , ano mga tools salamat po

 

[cristhryn]

hello poh mga ka symbianize merun poh akong problem about sa Gfive Gpad3 ko kc nag stuck na xa sa boot logo.eh wala akong mahanap na firmware nya.slamat pohhh

 

[armilvelasco]

Problem: mobile network not working / tab wont recognize in PC
Model / Model Number: M707EBC
Android Version: ICS 4.1.1
Build Number: A13_86VE_M707EBC.201303920
USB Debugging: Off

 

[leadtech28]

Re: ROM / Firmware Compilation for China Tablets + GUIDE

ok to sir ...psubs muna..

 

[dadeemee28]

Re: ROM / Firmware Compilation for China Tablets + GUIDE

good one sir

 

[eumarmahal]

Sir may firmware kaba ng Coby Kyros MID9742,, di po kac sya na turn on peru detected pa sya PC,, tnks in advance TS, try ko lang flash

 

[iElrond17]

Problem: Stock sa Boot, BOOTLOOP....
Model / Model Number: Torque Droidz Portal X
Android Version: JB 4.2.2
Build Number: idk
Usb Debugging: ON

nag repartition po ako,, nung nag enter na ko ng recovery nag wipe data/factory reset po ako then nag error yung wiping data

then nag reboot ako ayun bootloop na... pa help naman po...TIA

 

[keus12]

Problem:d na po gumagana yung touch screen nung na flash ko sya mali hatang firmware nkuha ko..,bago lng po kc nag aaral,hehe
hanap po sana ng tamang firmware para dto..,kaya lng after ko ma flash yung isang firmware d na gumagana yung touch screen taz hndi na ma read yung device pag i kinonect ko na sa netbook ko...d ko na masubukan yung isang firmware na download ko..panu po ang gagawin ko??help naman po pleaseeeeeeee..,



Model / Model Number: samsung galaxy tab mega 2.7.0 mid tablet
Android Version:4.2.2
Build Number:a13_OCOCCI_MID_NUCLEAR (ITO PO BA YUN)
USB Debugging: On

 

[poloko123]

Paano po iroot ang galaxy note 8 na china po ? gagana kaya sa Framaroot yun . d kase gumana yung Psiphon dun e . baka pag naka root na baka pwede na siya

Waiting for responses . TIA