Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

FIX your Tablet using Tools, Flash w/ Guide + ROMs + Backup!

Master maraming malaking tulong talaga to naayos ko yung tablet ng pinsan ko... God speed master....
 
Problem: dead boot after installing CWM , nkalimutang magbackup huhuhuhuh pero nadedetect pdin sa RKadroidtool
Model/Model Number:PLDT TELPAD ZTE V710-T72 <<wala po eto sa google,wla rin sa ZTE site ,wla din sa PLDT site,hindi ko mahanap stock firmware nya
Android Version: 4.1.1
Build Number: rk30sdk

eto po specs niya
Display: 7"inch
● Touch Panel: Capacitive 5-touch
● CPU: Rockchip RK3066 Cortex A9,1.6GHz,Dual-core CPU+Quad-core GPU
● RAM: 1GB DDR3
● Flash memory: 8GB
● Operation System: Android 4.1
● Camera: Front 0.3M / 3mp back
● WiFi: 802.11/b/g/n
● Bluetooth :yes
battery :4500mah
sana may mkatulong ,godbless!
 

Attachments

  • TELPAD.jpg
    TELPAD.jpg
    38.8 KB · Views: 8
  • TELPAD1.jpg
    TELPAD1.jpg
    40.5 KB · Views: 7
Last edited:
Unit: China Phone
Android 4.2.2
MTK6577xxx
Usb Debugging off

Problem:

No power
Not charging
No response pag kinabit yung Android sa PC via USB

Actions Made:

Tried rebooting (hard reboot)
Tried to remove cable wire sa battery then kabit ulit: no power pa rin: Tried jumpstarting failed pa rin.
Tried to replace LCD

*** Help Po. Thanks, ***
 
Re: ROM / Firmware Compilation for China Tablets + GUIDE

pa subscribe muna TS
 
Problem: Android stuck boot logo
Model / Model Number: Prestigio Multipad / PMP3470b
Android Version: d sya maview kung stuck sa android logo
Build Number: d sya maview kung stuck sa android logo
USB Debugging: d sya maview kung stuck sa android logo


Yung Prestigio Tablet ko stuck sa logo nya, na try ko na mag system recovery na wipe data/factory reset at wipe cache partition. Ano ba solution dito?
gumamit ako livesuit na flash kaya lang ndi yata nadedect ng livesuit yung tablet;
guys patulong naman ibang paraan para maflash tablet ko; please see attached picture;
thanks in advance

View attachment 186131
 

Attachments

  • livesuit.JPG
    livesuit.JPG
    133 KB · Views: 6
Re: ROM / Firmware Compilation for China Tablets + GUIDE

Thanks TS

my tablet is Royquuen
model=RQ735-A
build number=ALPS.JB5.TABLET.MP.V1
ANDROID VERSION=4.2.2

PLS SHARE NYO PO ANG FIRMWARE NITO GUSTO KO PO MAG UPGRADE.PLSSSSSSSSSSSSSS NEED YOUR HELP PO STOCK ON LOGO PLSSSSSSSS

- - - Updated - - -

Thanks TS

my tablet is Royquuen
model=RQ735-A
build number=ALPS.JB5.TABLET.MP.V1
ANDROID VERSION=4.2.2

PLS SHARE NYO PO ANG FIRMWARE NITO GUSTO KO PO MAG UPGRADE.PLSSSSSSSSSSSSSS NEED YOUR HELP PO STOCK ON LOGO PLSSSSSSSS:upset:
 
Re: ROM / Firmware Compilation for China Tablets + GUIDE

mga masters, CM Flare S,

not booting
not charging
nadedetect ng pc pero intermitent..

and

CM Fusion Bolt
not booting
not charging..

apnu kaya solution dito?

salamat mga masters..
 
Re: ROM / Firmware Compilation for China Tablets + GUIDE

salamat ts very helpful thread
 
sim meron po b kayo rom ng tzx-713ma2 for galaxy tab3 problem po nya baliktad ung touch
allwinner= a13
board id=tzx-713ma2
touch id=skd13026
touch ic=ilead gsl1680
TY po sir in advance
 
Re: ROM / Firmware Compilation for China Tablets + GUIDE

Pahelp po...

Problem: Inverted/mirrored display pati yung touch response.
Model / Model Number: Torque Droidz Portal X
Android Version: Jellybean 4.2.2
Build Number: DRZ_Portal X_4.2.2_131105
 
Problem: Bootloop after installing chainfire 3d (di pala compatible ang chainfire sa android 4.2 up)
Model / Model Number: Cherry Mobile Superion Memo(bagong labas sa MSE rare to kasi sa MSE lng inoorder)
Android Version: 4.2.2
Build Number: di ko nasave. bago lng kasi to wala pang 1week.
Usb Debugging: naka ON xa last na gamit ko.
Rooted: yes


i already tried to flash and use ADB pero its too late kasi na reset factory ko xa before ko ma open ung adb.exe
Di rin gumana ung hard factory reset after ko reset ganun parin.
sinubukan ko narin restore backup. di rin gumana.

sana po makahanap ako ng firmware na pde kong magamit para ma reflash..

gagana po ba kaya qng same tablet ibabackup tapos sasave sa sd card at ililipat sa isang tablet?
 
Last edited:
Re: ROM / Firmware Compilation for China Tablets + GUIDE

meron plang gantung thread dito ^_^ sayang ang daming tablet dito sa office mga 10pcs. kasu puro basag at lines.. ask ko lang kung anu ba ang nangyayari kapag nag bublue lines sa screen pero ok naman ang touch panel nya?? :3
 
Problem: Bootloop after installing chainfire 3d (di pala compatible ang chainfire sa android 4.2 up)
Model / Model Number: Cherry Mobile Superion Memo(bagong labas sa MSE rare to kasi sa MSE lng inoorder)
Android Version: 4.2.2
Build Number: di ko nasave. bago lng kasi to wala pang 1week.
Usb Debugging: naka ON xa last na gamit ko.
Rooted: yes


i already tried to flash and use ADB pero its too late kasi na reset factory ko xa before ko ma open ung adb.exe
Di rin gumana ung hard factory reset after ko reset ganun parin.
sinubukan ko narin restore backup. di rin gumana.

sana po makahanap ako ng firmware na pde kong magamit para ma reflash..

gagana po ba kaya qng same tablet ibabackup tapos sasave sa sd card at ililipat sa isang tablet?
 
Re: ROM / Firmware Compilation for China Tablets + GUIDE

pa marka po mga sir
 
Re: ROM / Firmware Compilation for China Tablets + GUIDE

Replace lang po ng lcd

- - - Updated - - -

meron plang gantung thread dito ^_^ sayang ang daming tablet dito sa office mga 10pcs. kasu puro basag at lines.. ask ko lang kung anu ba ang nangyayari kapag nag bublue lines sa screen pero ok naman ang touch panel nya?? :3
Replace LCD po
 
sir ask lang may china android tab ako gustu ko sana mag install ng rom kaso d pa ako marunong
at safe ba to??
u g rom po ba ay may kanya kanyang model i mean wala po bang universal roms

ano po ba qng features na makukuha ko pag nag install ako ng rom??
tnx begginer lang po kaya madami tanong
 
Re: FIX your Tablet using Tools, Flash w/ Guide ROMs Backup!

Help Please!Hp Slate 7 nagloloko yong screen. Kahit na hindi pinindot yong screen kusang ng,oopen ng applications,etc. Atsaka kapag hinawakan sa gilid nagloloko lumalabas kahit anong apps. Anong cause bakit nagkaganun ts? Patulong please!
 
Re: FIX your Tablet using Tools, Flash w/ Guide ROMs Backup!

Sir,, i need your expertise.. yung tablet ko kasi ( COBY KYROS MID 8065) 00.00 yung internal memory nya. ano kya pede ko gwin ko dto? nawawala kasi lahat ng nainstall ko na application pag-off ko yung tab. thanks in advance..
 
:help::help::help:
Problem: Forgot Pattern Password
Model : A23 allwinner TZX-723q
Android : Jelly Bean 4.2.2
Build number : I don't know
USB debugging : OFF
Pa help naman po sa tablet ko a23 allwinner china tablet(made in korea) na forgot yun password ng pamangkin ko... :help:
 
View attachment 187427 Sir bakit po ganito ? Need ko po hinahanap na ng may are .. Samsung Galaxy tab 3 po yan na Korea A13 po sya with Sim card and Dual Camera
 

Attachments

  • Untitled.png
    Untitled.png
    43 KB · Views: 15
Back
Top Bottom