Flash / upgrade your share mid-2330 safely, effectively, hassle free.

[mhay31]

@putalittlemore aling steps dun yung gagawin ko? ginawa ko n po yung cd /vendor/modules then ls.. ang lumabas po eh yung mga modules n pinost ko po..

 

[putalittlemore]

after #4

type ===>>> lsmod

 

[mhay31]

@putalittlemore e2 po yung lumabas..

lsmod
rtl8150 10305 0 - Live 0xbf0af000
mcs7830 7581 0 - Live 0xbf0a9000
qf9700 9152 0 - Live 0xbf0a2000
asix 24601 0 - Live 0xbf096000
cedarx 9351 0 - Live 0xbf08f000
sun5i_csi0 33255 0 - Live 0xbf081000
gc03082 18524 1 - Live 0xbf078000
gc0308 18408 1 - Live 0xbf06f000
videobuf_dma_contig 6251 1 sun5i_csi0, Live 0xbf06a000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0xbf060000
ft5x_ts 47217 0 - Live 0xbf04f000
mxc622x 6088 1 - Live 0xbf049000
mecs 4078 1 - Live 0xbf045000
mali 150716 4 - Live 0xbf013000
ump 49098 9 mali, Live 0xbf000000

 

[putalittlemore]

goodix811 ba TS module mo? di kasi sya nakaload ...

after #4

type ===>>> insmod /vendor/modules/goodix811.ko

pag successful, try mo galawin screen mo ...

 

[otchokreyes]

sir nikko meron akong 2 tablet na share yung isa hang sa logo, pwede ko b kopyahin yung firmware nung isa at kung pwede pano po ang gagawin ko steps. many salamat

 

[mhay31]

@putalittlemore eto po ginawa ko..

root@android:/ # insmod /vendor/modules/goodix811.ko
insmod /vendor/modules/goodix811.ko

tas after po eh paano malalaman if successful..
ayaw p dn po gumana ng TS..

@putalittlemore nag lsmod po ulit aq tas e2 n po lumabas..

lsmod
goodix811 24662 1 - Loading 0xbf0b6000
rtl8150 10305 0 - Live 0xbf0af000
mcs7830 7581 0 - Live 0xbf0a9000
qf9700 9152 0 - Live 0xbf0a2000
asix 24601 0 - Live 0xbf096000
cedarx 9351 0 - Live 0xbf08f000
sun5i_csi0 33255 0 - Live 0xbf081000
gc03082 18524 1 - Live 0xbf078000
gc0308 18408 1 - Live 0xbf06f000
videobuf_dma_contig 6251 1 sun5i_csi0, Live 0xbf06a000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0xbf060000
ft5x_ts 47217 0 - Live 0xbf04f000
mxc622x 6088 1 - Live 0xbf049000
mecs 4078 1 - Live 0xbf045000
mali 150716 4 - Live 0xbf013000
ump 49098 9 mali, Live 0xbf000000

@putalittlemore kpag ayaw p din po b eh try ko po ba ipasok yung ibang modules using "insmod /vendor/modules/TSmodulename.ko"..
kailangan ko p po ba ireboot para malaman if ngwowork na ang TS.. salamat..

 

[putalittlemore]

@mhay31

naka load na yung goodix ... most probably, hindi goodix811 yung TS mo ... yep, try ka ng iba ... no need to restart your tab after every insmod ... otherwise, aalisin lang ng system yung niload mo na module ... after every insmod ... gawin mo lsmod para makita mo kung nagloload yung modules ...

 

[mhay31]

@putalittlemore after po nito..
root@android:/ # insmod /vendor/modules/goodix811.ko
insmod /vendor/modules/goodix811.ko

..eh wala n po lumalabas.. d n po ako makapagpasok ng command.. ginawa ko eh close ko po ang cmd and then open po ulit.. tas check ko po yung lsmod.. ganun p din yung goodix811 eh loading p dn po..

goodix811 24662 1 - Loading 0xbf0b6000

..tas tntry ko po yung TS eh ayaw p dn po gumana.. ginawa ko po after eh close ko cmd tas nirestart ko po ang tablet.. then pagcheck ko po ulit sa lsmod eh nawala na po yung goodix811 (goodix811 24662 1 - Loading 0xbf0b6000)

..baka may mali po ako ginagawa..

@putalittlemore ah kaya pala nawawal kpg nirerestart ko ang tablet.. cge try q po yung iba.. pero normal po b n Loading ang nakalagay at hindi Live..

 

[putalittlemore]

first time ko naka encounter ng ganyan ah ... ang alam ko kelangan live para magagamit mo talaga yung module ... anyway ...

visit this site ... http://www.techknow.me/forum/ ... register ka ... tapos punta ka dito ... http://www.techknow.me/forum/index.php?topic=4595.0 ... download mo yung rom and yung mga batch files containing different TS modules to run ... baka matsambahan mo dun yung TS mo ...

good luck ...

 

[mhay31]

@putalittlemore ntry ko na po lahat ng modules yung iba po eh ngffailed.. pero e2 po yung mga pumasok.. kaso lahat po eh loading.. at ayaw pa din gumana ng TS..

lsmod
mma7660 11900 1 - Loading 0xbf17e000
gt2005 27579 1 - Loading 0xbf174000
gt811 24401 1 - Loading 0xbf149000
gslx680 270535 1 - Loading 0xbf0ea000
goodix811 24662 1 - Loading 0xbf0b6000
rtl8150 10305 0 - Live 0xbf0af000
mcs7830 7581 0 - Live 0xbf0a9000
qf9700 9152 0 - Live 0xbf0a2000
asix 24601 0 - Live 0xbf096000
cedarx 9351 0 - Live 0xbf08f000
sun5i_csi0 33255 0 - Live 0xbf081000
gc03082 18524 1 - Live 0xbf078000
gc0308 18408 1 - Live 0xbf06f000
videobuf_dma_contig 6251 1 sun5i_csi0, Live 0xbf06a000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0xbf060000
ft5x_ts 47217 0 - Live 0xbf04f000
mxc622x 6088 1 - Live 0xbf049000
mecs 4078 1 - Live 0xbf045000
mali 150716 4 - Live 0xbf013000
ump 49098 9 mali, Live 0xbf000000


@putalittlemore cge po try q po yung links mo.. Thank you s help mu h..

@putalittlemore naku may connection problems po dun sa links mu server busy po.. baka bukas ko na lang po itry, sakit n ng ulo ko kc..
thanks for everything..

 

[otchokreyes]

sir patulong naman pano kopyahin yung firmware or rom ng tablet n gumagana para maitransfer ko s kabilang tablet n hang up sa logo..

 

[hajie04]

sir patulong naman pano kopyahin yung firmware or rom ng tablet n gumagana para maitransfer ko s kabilang tablet n hang up sa logo..

Dalawa ba tablet mo??
Kung dalawa. Gamit ka uberizer para ma-back up mo ung rom nung isa at iflash mo dun sa isa.
GetS?? hahaha

 

[saiber]

sir patulong naman pano kopyahin yung firmware or rom ng tablet n gumagana para maitransfer ko s kabilang tablet n hang up sa logo..

ganyan din binalak kong gawin eh, pero nalaman kong hindi pwede ipangflash yung fw makukuha mo sa isang tablet, kelangan pa daw yon ng ROM kitchen, para pwede mo ipangflash yung FW na nakuha mo,di ko alam kung pano ginagawa yon eh. pero may tutorial naman hanap ka nalang

 

[bryella]

mga sir.. question bakit ayaw mag extract nung image file using extract_img.bat? pero pag ginamit ko yung unimg.exe ayung nagkakafolder so to continue, sinunod ko yung guide about dun sa inverted touch ang problem naman ayaw nya marepact using this repack_ics.bat, ahehehe.. anu kaya solution dito?


edit:

okay na pala dapat pala nasa same folder sila, question ulit, sa step na ito..

6. Drag script.bin to unscript.bat, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit) using Notepae++

walang value na pwede ko ma-edit yung dalawa? pwede bang ako na lang maglagay ng value? or leave ko na lang?

 

[otchokreyes]

ok salamat po sa info.

 

[jjaayyaarr2000]

If you look closely those aren't my links.. Kay TS yun. I didn't think the links would still work.

Same kayo ng problem ni jjaayyaarr2000.. Hopefully you follow instructions better.

Files needed:
ScriptUnscript.7z
A properly set-up ADB.
ADB Drivers
Notepad++





Repeat steps 1 to 7 of the non-working touchscreen fix until you find the correct module for your touch screen controller.

Note for jjaayyaarr2000: Better instructions. Nilipat ng Google ang ADB sa platform-tools instead of tools folder in recent SDK versions. That might be why it won't work for you. Di ko din napansin eh. Sorry.

nainstall ko na po yung adb kaso eto po ang nakalagay

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Administrator>adb devices
'adb' is not recognized as an internal or external command,
operable program or batch file.

C:\Documents and Settings\Administrator>



saka san po ba makikita ito? Install the drivers and unzip the archive in C:/


pag nainstall po ba ang adb kusang may lalabas na naka zip sa c or idodownload ko pa po ba ito?

 

[putalittlemore]

question ulit, sa step na ito..

6. Drag script.bin to unscript.bat, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit) using Notepae++

walang value na pwede ko ma-edit yung dalawa? pwede bang ako na lang maglagay ng value? or leave ko na lang?

test mo na lang sir ... either 0 or 1 lang naman ...

 

[blue3605]

sir meron po akong 7" na tab galaxy tatak sa likod pero mukhang parehas ng unit na 2 e2 po itsura nya dual cam din, http://www.lazada.com.ph/Haipad-A13-7-A4ndroid-40-Dual-Cam-4GB-with-Wi-Fi-Red-60972.html

black lan po ang screen pero pag sinasaksak sa sa pc nakikita nman nung ni try ko ung method sa phoenix nag steady lan po sa full bar na green tpos ndi po sya nag shut down

tnx ts

 

[bankai123]

Sprite error

 

[NikkoJames15]

bos nikko ano na blita sa patch nang faaastjb meron na bang working un back cam?

Sabi ni Toxicro (author of FaaastJB), di daw compatible yung kernel nung ROM sa dual cams.

@nikko

ang alam ko combination of 2 to 3 TS modules meron ... pero mas lalong madugong hulaan yun ... ... hintay natin laman ng modules nya ...

nga pala bro ... may nakita na ko JB rom for A13 dual cam tabs ... share ko dito pag ok ... good luck saken ...

Cool. Post ASAP pag OK ha? Nakakainis bumalik to ICS after JB eh.. Times like this I wish I bought a Pipo or an Archos.. But then again I wouldn't be in this thread.. Haha.

Sprite error

Use LiveSuit.

sir meron po akong 7" na tab galaxy tatak sa likod pero mukhang parehas ng unit na 2 e2 po itsura nya dual cam din, http://www.lazada.com.ph/Haipad-A13-7-A4ndroid-40-Dual-Cam-4GB-with-Wi-Fi-Red-60972.html

black lan po ang screen pero pag sinasaksak sa sa pc nakikita nman nung ni try ko ung method sa phoenix nag steady lan po sa full bar na green tpos ndi po sya nag shut down

tnx ts

TS inactive. Pa-post nalang ng model number para alam namin.. Sa dinami-dami ng China tablets di kami sure aling "Galaxy" yan.

nainstall ko na po yung adb kaso eto po ang nakalagay

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Administrator>adb devices
'adb' is not recognized as an internal or external command,
operable program or batch file.

C:\Documents and Settings\Administrator>



saka san po ba makikita ito? Install the drivers and unzip the archive in C:/


pag nainstall po ba ang adb kusang may lalabas na naka zip sa c or idodownload ko pa po ba ito?

Naalala mo yung SDK? Zip archive yun right? YUn ang i-unzip mo sa C:/.

mga sir.. question bakit ayaw mag extract nung image file using extract_img.bat? pero pag ginamit ko yung unimg.exe ayung nagkakafolder so to continue, sinunod ko yung guide about dun sa inverted touch ang problem naman ayaw nya marepact using this repack_ics.bat, ahehehe.. anu kaya solution dito?


edit:

okay na pala dapat pala nasa same folder sila, question ulit, sa step na ito..

6. Drag script.bin to unscript.bat, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit) using Notepae++

walang value na pwede ko ma-edit yung dalawa? pwede bang ako na lang maglagay ng value? or leave ko na lang?

That problem again? If I recall correctly pinanggawa kita ng converted fex files.. Pwede yun dyan.