Na encounter nyo na ba sa flash drive nyo 16gb or any kind tapos pag nagsave kayo dun afterwards nawawala ung nasave nyo or laging corrupt ung file?
or
Flash drive nyo biglang nawalan ng laman pag tinignan ang properties 0.0mb ang nakalagay?
now here is the solution to that problem, i will teach you step by step...
1 - download chipgui 3 to detect ur chip provider,vid and pid
here is the link
"click here"
2 - connect mo ung flash drive
3 - open ChipGenius wait nyo lang at read nya ang iyong flash dirive
4 - get the pid and vid
http://img259.imageshack.us/img259/2637/pidandvid.jpg
5 - check also ung chip vendor and chip part-number
http://img442.imageshack.us/img442/4083/chipvendor.jpg
6 - punta kau dito sa russian site na eto and click iFlash
http://www.flashboot.ru/
http://img43.imageshack.us/img43/8287/iflash.jpg
7 - enter you pid and vid shown at step 4 and press enter or click the button
http://img521.imageshack.us/img521/8960/clickj.jpg
8 - lalabas lahat dyan ang mga result for the pid and vid then just search lang ung flash drive mo na kaparehas sya ng chip vendor and chip part number as shown on step 5
http://img521.imageshack.us/img521/244/clicklangdun.jpg
9 - click the download button
http://img9.imageshack.us/img9/7233/downloaddj.jpg
10 - after downloading the application
open alcorMP (run as admin if windows 7)
11 - madedect nya dyan ung ung flash drive mo
then click start
wait nyo lang po hanggang matapos ang pagfoformat ng usb
and their you have it!!!
ur flash drive is ready na ulit
hope this one will help you alot!!!!!
NOTE:
-please do not turn off the device or unplug
masisira po kasi flash drive nyo and hindi na gagana pa ung flash drive
-pag na hard reformat ang flash drive makikita mo ang tunay na space ng flash drive just like mine ung 16gb ko after nareformat naging 368mb lang lang tunay na laman kaya pala pag nagsasave ako ng malalaking file hindi sya pwede nacocorrupt ung file
-do it at your own risk
if you follow thoroughly my guide hindi yan masisira