- Messages
- 116
- Reaction score
- 0
- Points
- 26
Hello po sa mga experts. tanong ko lang ano kaya problem mg laptop ko.
Heto ang condition now ng laptop ko:
1. Umaandar ang power button
2. Walang display
3. Pag power ko sa button, umaandar ang fan sa simula, siguro for about 10 seconds and then namamatay ang fan. Pero no display pa rin ang screen.
4. Aandar ang fan ulit after siguro 30 minutes na naka on ang power (with no dispay)
5. No display pa rin.
Nagawa ko na ang mga sumusunod:
1. Clean the fan and the board
2. Eject battery and install
3. Eject hardisk and re-install
4. Eject the Ram and re-install
5. Eject processor and re-install
6. Plug and unplug the chords
7. Replace the thermal paste (tanong ko na lang din, pag nagpalit ba ng thermal paste, hintayin ba na magdry ang paste or ok lang kahit basa pa tapos salpak agad?) - after ko ito nagawa, gumana, may display na. pero after ko ginamit ng matagal, biglang shut down. tapos balik ulit sa ganitong condition.
8. Hard reset (eject the battery and hard disk then push power button for 30 seconds - 1 minute)
Ano kaya problem nito? hmmmm.. salamat sa mga sasagot.
Heto ang condition now ng laptop ko:
1. Umaandar ang power button
2. Walang display
3. Pag power ko sa button, umaandar ang fan sa simula, siguro for about 10 seconds and then namamatay ang fan. Pero no display pa rin ang screen.
4. Aandar ang fan ulit after siguro 30 minutes na naka on ang power (with no dispay)
5. No display pa rin.
Nagawa ko na ang mga sumusunod:
1. Clean the fan and the board
2. Eject battery and install
3. Eject hardisk and re-install
4. Eject the Ram and re-install
5. Eject processor and re-install
6. Plug and unplug the chords
7. Replace the thermal paste (tanong ko na lang din, pag nagpalit ba ng thermal paste, hintayin ba na magdry ang paste or ok lang kahit basa pa tapos salpak agad?) - after ko ito nagawa, gumana, may display na. pero after ko ginamit ng matagal, biglang shut down. tapos balik ulit sa ganitong condition.
8. Hard reset (eject the battery and hard disk then push power button for 30 seconds - 1 minute)
Ano kaya problem nito? hmmmm.. salamat sa mga sasagot.
Last edited: