I'll pay load need help

[PAULKUN1991]

Mga tsong patulong ako kung may paraan ba gawing bm622m or any globe wimax ang dv ko. Paturo po ako step by step magbabayad ako load. Thanks!

 

[drexsho]

1. Download this firmware http://www.mediafire.com/download/9lfd18o5qqxg9cu/BM622m-tar.gz

2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.

3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.

4. Click on upload and wait for the flashing to finish.

5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.

6. The device will boot again wait for your modem to complete its boot.

7. Unplug your modem's UTP cable and plug it again.

8. Check your LAN's gateway IP address it should be "192.168.254.1"

9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.

10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"

11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "http://192.168.254.1/advanced/acl.html"

12. Check Telnet > LAN and click on apply.

13. Now download this script "http://www.mediafire.com/download/mwx2b55a7b2zzmf/Changepass.vbs" it will change your admin password without the need of generating admin password.

14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".

15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"

16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!


ADVANTAGES:

You can now snipe 22m series macs and use any 22m supported tools
More stable and consistent for both Smart and Globe macs
More secured and say no more to "Remote Hackers"
You can now see you Wimax connect and change frequency realtime
Easier to disable TELNET and HTTP over WAN
Customize both Admin and User passwords

DISADVANTAGES:
Wifi is not supported

VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
http://youtu.be/nUKk3yL8TKM


Frequency Changer for SMART and GLOBE:
http://www.mediafire.com/download/h1ly6bmt03am2uf/Frequency+Changer+for+GLOBE+and+SMART.rar

 

[Str4wh4t]

salamat dito

 

[awilness]

1. Download this firmware http://www.mediafire.com/download/9lfd18o5qqxg9cu/BM622m-tar.gz

2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.

3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.

4. Click on upload and wait for the flashing to finish.

5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.

6. The device will boot again wait for your modem to complete its boot.

7. Unplug your modem's UTP cable and plug it again.

8. Check your LAN's gateway IP address it should be "192.168.254.1"

9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.

10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"

11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "http://192.168.254.1/advanced/acl.html"

12. Check Telnet > LAN and click on apply.

13. Now download this script "http://www.mediafire.com/download/mwx2b55a7b2zzmf/Changepass.vbs" it will change your admin password without the need of generating admin password.

14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".

15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"

16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!


ADVANTAGES:

You can now snipe 22m series macs and use any 22m supported tools
More stable and consistent for both Smart and Globe macs
More secured and say no more to "Remote Hackers"
You can now see you Wimax connect and change frequency realtime
Easier to disable TELNET and HTTP over WAN
Customize both Admin and User passwords

DISADVANTAGES:
Wifi is not supported

VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
http://youtu.be/nUKk3yL8TKM


Frequency Changer for SMART and GLOBE:
http://www.mediafire.com/download/h1ly6bmt03am2uf/Frequency+Changer+for+GLOBE+and+SMART.rar

idol.. pede ba to sa motorola cpei 23825 from smart? thanks!

 

[iorinhoj]

ayaw ng umilaw ng dv ko...

 

[olivarries]

Mga tsong patulong ako kung may paraan ba gawing bm622m or any globe wimax ang dv ko. Paturo po ako step by step magbabayad ako load. Thanks!

Nagawa mo na ba o hindi pa? May pinakamadaling paraan ako kung gusto mo. pm mo lang ako.

 

[lucian019]

1. Download this firmware http://www.mediafire.com/download/9lfd18o5qqxg9cu/BM622m-tar.gz

2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.

3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.

4. Click on upload and wait for the flashing to finish.

5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.

6. The device will boot again wait for your modem to complete its boot.

7. Unplug your modem's UTP cable and plug it again.

8. Check your LAN's gateway IP address it should be "192.168.254.1"

9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.

10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"

11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "http://192.168.254.1/advanced/acl.html"

12. Check Telnet > LAN and click on apply.

13. Now download this script "http://www.mediafire.com/download/mwx2b55a7b2zzmf/Changepass.vbs" it will change your admin password without the need of generating admin password.

14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".

15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"

16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!


ADVANTAGES:

You can now snipe 22m series macs and use any 22m supported tools
More stable and consistent for both Smart and Globe macs
More secured and say no more to "Remote Hackers"
You can now see you Wimax connect and change frequency realtime
Easier to disable TELNET and HTTP over WAN
Customize both Admin and User passwords

DISADVANTAGES:
Wifi is not supported

VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
http://youtu.be/nUKk3yL8TKM


Frequency Changer for SMART and GLOBE:
http://www.mediafire.com/download/h1ly6bmt03am2uf/Frequency+Changer+for+GLOBE+and+SMART.rar

ty d2 idol

 

[PAULKUN1991]

1. Download this firmware http://www.mediafire.com/download/9lfd18o5qqxg9cu/BM622m-tar.gz

2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.

3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.

4. Click on upload and wait for the flashing to finish.

5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.

6. The device will boot again wait for your modem to complete its boot.

7. Unplug your modem's UTP cable and plug it again.

8. Check your LAN's gateway IP address it should be "192.168.254.1"

9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.

10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"

11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "http://192.168.254.1/advanced/acl.html"

12. Check Telnet > LAN and click on apply.

13. Now download this script "http://www.mediafire.com/download/mwx2b55a7b2zzmf/Changepass.vbs" it will change your admin password without the need of generating admin password.

14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".

15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"

16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!


ADVANTAGES:

You can now snipe 22m series macs and use any 22m supported tools
More stable and consistent for both Smart and Globe macs
More secured and say no more to "Remote Hackers"
You can now see you Wimax connect and change frequency realtime
Easier to disable TELNET and HTTP over WAN
Customize both Admin and User passwords

DISADVANTAGES:
Wifi is not supported

VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
http://youtu.be/nUKk3yL8TKM


Frequency Changer for SMART and GLOBE:
http://www.mediafire.com/download/h1ly6bmt03am2uf/Frequency+Changer+for+GLOBE+and+SMART.rar

salamat dito tol. the best ka. ngayon lang naka OL. hehe.

 

[symarcapture]

pm mo ko sir tulungan kita

 

[PAULKUN1991]

1. Download this firmware http://www.mediafire.com/download/9lfd18o5qqxg9cu/BM622m-tar.gz

2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.

3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.

4. Click on upload and wait for the flashing to finish.

5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.

6. The device will boot again wait for your modem to complete its boot.

7. Unplug your modem's UTP cable and plug it again.

8. Check your LAN's gateway IP address it should be "192.168.254.1"

9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.

10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"

11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "http://192.168.254.1/advanced/acl.html"

12. Check Telnet > LAN and click on apply.

13. Now download this script "http://www.mediafire.com/download/mwx2b55a7b2zzmf/Changepass.vbs" it will change your admin password without the need of generating admin password.

14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".

15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"

16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!


ADVANTAGES:

You can now snipe 22m series macs and use any 22m supported tools
More stable and consistent for both Smart and Globe macs
More secured and say no more to "Remote Hackers"
You can now see you Wimax connect and change frequency realtime
Easier to disable TELNET and HTTP over WAN
Customize both Admin and User passwords

DISADVANTAGES:
Wifi is not supported

VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
http://youtu.be/nUKk3yL8TKM


Frequency Changer for SMART and GLOBE:
http://www.mediafire.com/download/h1ly6bmt03am2uf/Frequency+Changer+for+GLOBE+and+SMART.rar

sir ganito po lumabas sa cmd after ko na click yung .vbs file.
View attachment 177084
paano po to sir? ano pala dapat gawin after ma dl yung .vbs? patulong naman po. 2 steps away nalang ako.

- - - Updated - - -

up ko lang po. salamat.

- - - Updated - - -

na enable ko na yung telnet lan sir. ganun parin. patulong nmn.