What's new
Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

NOKIA DEAD PHONE FLASHING via Phoenix -- TUTORIAL INSIDE!

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

kissme24 said:
Ano susunod gawin ts?
Click to expand...

hindi ako ang TS dito.. pag may naivifirm kana dun mo idownload ang firmware mo. back read po tayo. paulit ulit lang naman ang mga tanong nila. ilang beses ko na rin sinagot. may ss pa ko recet post lang. back read na lang po. salamat
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

pano ko malalaman yung 7 digit code ko? wala naman nakalagay dito sa cp ko. :(
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

nasa likod ng unit un pagtinanggal ang battery may sticker dun ng info ng phone. usually 7 letters/numbers un.
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

working sa lahat ng nokia?
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Psychoteck said:
nagawa ko na! salamat sir! :thumbsup:
Click to expand...


:clap: :clap:

yung sken ala na pag-asa Nokia 5530 ko,sabi ng cptech eh power ic na daw yung problema at 2taw ang singil nila.try ko pa din dalin sa Nokia Care....
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

kissme24 said:
ts penge naman ng product code ng c2-03 . Di ko alam kung paano mag lagay ng product code e
Click to expand...

Ts Paano ba makuha ng product code ng c2-03? Eto un Code niya 059D3W2

diba alam mo na kung anu yung product code mo?? 059D3W2 sabi mo diba, sa navifirm makikita mo yan. sa page 137 makikita mo dun yung mga software na dapat mong gamitin.
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

nelgalarosa said:
pano ko malalaman yung 7 digit code ko? wala naman nakalagay dito sa cp ko. :(
Click to expand...

Tl0KR.jpg



----- yan po sample sticker sa back panel ng nokia phone, yung 7 digit number ang code mo
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

badhellzing said:
:clap: :clap:

yung sken ala na pag-asa Nokia 5530 ko,sabi ng cptech eh power ic na daw yung problema at 2taw ang singil nila.try ko pa din dalin sa Nokia Care....
Click to expand...

What? Ang mahal naman. Di ko na ipapaayos yung saken pag ganyan
singil. :weep: Hindi ko pa naaatuhan dead flash.
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

vhinpotz said:
What? Ang mahal naman. Di ko na ipapaayos yung saken pag ganyan
singil. :weep: Hindi ko pa naaatuhan dead flash.
Click to expand...

sayang kc,kung ibebenta ko ng sira eh baka 500 lang halaga nun :weep:
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Sabagay. Kelan mo balak ipatingin sa Nokia center? Kabado ako baka hindi na din maayos ng
dead flash 'to. Malas lang!
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

vhinpotz said:
Sabagay. Kelan mo balak ipatingin sa Nokia center? Kabado ako baka hindi na din maayos ng
dead flash 'to. Malas lang!
Click to expand...

dapat pupunta me sa SM Manila kaso anlakas ng ulan dito Manila, di me makaalis ng ofis
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Asic CMT: Programming 68%
Asic CMT: Programming RM-504_40.0.003_C01_prd.rofs3.fpsx
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming RM-504_32.0.007_007_000_U001.uda.fpsx
Asic CMT: Programming 74%
Asic CMT: Programming 5530_SW_0634800_KSA_2G_3.0.fpsx
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Error writing to target address 0x00000000, Size 0x00020000
Asic CMT: ERROR Programming 5530_SW_0634800_KSA_2G_3.0.fpsx Block 0. Unable to continue flashing.
Asic CMT: Error in sending data from 5530_SW_0634800_KSA_2G_3.0.fpsx.
Protocol 1: Error during Flashing. Unable to continue.
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Asic CMT: Verifying communication to device...
Waiting for USB device...
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted

YAN ANG ERROR SAKEN. BAKIT KAYA?
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

vhinpotz said:
Asic CMT: Programming 68%
Asic CMT: Programming RM-504_40.0.003_C01_prd.rofs3.fpsx
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming RM-504_32.0.007_007_000_U001.uda.fpsx
Asic CMT: Programming 74%
Asic CMT: Programming 5530_SW_0634800_KSA_2G_3.0.fpsx
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Resending Prepare for Write Request....
ADL LDR: Error writing to target address 0x00000000, Size 0x00020000
Asic CMT: ERROR Programming 5530_SW_0634800_KSA_2G_3.0.fpsx Block 0. Unable to continue flashing.
Asic CMT: Error in sending data from 5530_SW_0634800_KSA_2G_3.0.fpsx.
Protocol 1: Error during Flashing. Unable to continue.
Unable to flash phone 0x84012283
Starting to recover the phone
Recovering phone
Initializing
Scanning image files...
Asic CMT: Verifying communication to device...
Waiting for USB device...
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted

YAN ANG ERROR SAKEN. BAKIT KAYA?
Click to expand...

magback reading ka sa mga feedback baka may kagaya ka??
post mu din dito http://www.symbianize.com/showthread.php?t=204022 baka andun si ms.dyulay
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sa wakas nabuhay na din 6120c ko...mraming mraming salamat....!!!!:clap:
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

thanks dito marami na akong nabuhay na cp dahil dito
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

c2-03-2.jpg


:help: everytime na magre-reflash ako ng C2-03, almost 100% na yung progress but this error message always appear no matter what firmware package I use. May mga nakaka-experience ba nito sa inyo? kung naayos niyo, ano ang solution? TIA.
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sir pwede po ba ito sa dead 5530xm?as i dead po.nahulog sa water.may polarity pa ung board at hindi grounded.ayaw mag open.pa help po.thanks
 
Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-356_40.0.005_prd.rofs2.V22
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-356_40.0.005_C01_prd.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM356_40.0.005_023_xxx_U01.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-356_40.0.005_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming RM-356_40.0.005_prd.rofs2.V22
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming RM-356_40.0.005_C01_prd.rofs3.fpsx
Asic CMT: Programming RM356_40.0.005_023_xxx_U01.uda.fpsx
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x84009427 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing



Well ayaw pa din nya mabuhay. Suko na ako. :lol:
Nokia 5530XM.
 
You must log in or register to reply here.

Similar threads

fgbrioso07
I UNLOCK ANY LOCK OF PHONE
Replies
1
Views
163
jinx13
jinx13
sonraffae888
BASIC DELIVERANCE MANUAL
Replies
0
Views
127
sonraffae888
sonraffae888
M
iMac 21.5 mid 2011 not booting
Replies
0
Views
143
Mighty_M1K3
M
jancrea2430
Magoshare AweClone for Mac with lifetime key
Replies
0
Views
239
jancrea2430
jancrea2430
ronaldsanjos
Tutorial Guide/Tutorial on how to FLASH kdz firmware on LM-F100TMW/LM-F100VMW
Replies
0
Views
573
ronaldsanjos
ronaldsanjos
Back
Top Bottom