NOKIA DEAD PHONE FLASHING via Phoenix -- TUTORIAL INSIDE!

zap17 · Jul 27, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

awww, sayang, mhe alam po kau tool na pwdng makagawa ng sirang IMEI number? Salamat..

kingair · Jul 28, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sir/ma'am failed po hindi makapunta sa flashmode

taray90 · Jul 28, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

same kami ng prob nung first post sa page 33. hmmm... pahelp po? TIA.

taray90 · Jul 28, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Tas may lumalabas po na ganyan? Panu po kaya yan? Thnak you in advance

nga po pala.. naka win7 po ako tas 2010phoenix at 5530 cp ko thank you uli sa sasagot

taray90 · Jul 28, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Ganto naman naun.. Hmmm...

jOhan26 · Jul 29, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

BOss eto ba sulusyon sa isa kong phone bigla nalang kasi nasira.
kapag i-turn On ko lumalabas naman yung display,then after few seconds HANG then nag turn by itself. paulit paulit lang hindi na tlga magamit.

WoWNASABAYABASANWoW · Jul 29, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sakin ERROR APE FLASHING.......... aw pana kaya to TS? dead na n70me ko .. hindi na maDetect ng pc suit..........

taray90 · Jul 29, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

NAG TRY AKO JAF ETO LUMABAS:
--------------------------------------

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\

Searching for default location of ini...
Checking path: \Products\RM-504\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-504\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_007_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..........PUBKEYS already sent...
.......Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 544, APE blocks: 0
Erasing cmt...
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19...
Erasing cmt zone 07260000 - 0935FFFF ... Erase result: 0000
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx...
Erasing cmt zone 09360000 - 09E5FFFF ... Erase result: 0000
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_007_000_U001.uda.fpsx...
Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx...
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_007_000_U001.uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Setting test mode...
Failed! Aborting!
Done!

-----------------------------

PANU PO KAYA YAN?

swordfizh · Jul 29, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sir lahat po na ng brand ng cp pwede dito?ty in advance

apostolis25 · Jul 30, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sir bakit walang RM yung sa 5233 n download ko nman yung RM nya sa bluenokia help namn po
:weep:

jeanpau11 · Jul 31, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sir hindi po ko po magawa ung process kc wala s product version list yung RM-588.. tulong nman po.. PLEASE! :weep:

khriss · Jul 31, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

gumamit ka ng updated or latest na phoenix.. jaskeng bata

http://hotfile.com/dl/123659056/c3a329d/Phoenix_Service_Software_2011.24.002.46258_Cracked_.rar.html

http://www.mediafire.com/?mg339mwg7lbk9mh

khriss · Jul 31, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

taray90 said:
NAG TRY AKO JAF ETO LUMABAS:
--------------------------------------

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\

Searching for default location of ini...
Checking path: \Products\RM-504\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-504\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-504\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-504\RM-504_32.0.007_007_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: NONE
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00
PPM Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19
CNT Flash file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx
APE Variant file: C:\Users\HP\Desktop\FW\RM-504_32.0.007_007_000_U001.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..........PUBKEYS already sent...
.......Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 544, APE blocks: 0
Erasing cmt...
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19...
Erasing cmt zone 07260000 - 0935FFFF ... Erase result: 0000
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx...
Erasing cmt zone 09360000 - 09E5FFFF ... Erase result: 0000
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_007_000_U001.uda.fpsx...
Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.core.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_prd.rofs2.V19...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_C04_prd.rofs3.fpsx...
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Users\HP\Desktop\FW\RM-504_32.0.007_007_000_U001.uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Setting test mode...
Failed! Aborting!
Done!

-----------------------------

PANU PO KAYA YAN?

ang problema kasi dun sa phoenix flashing mo, luma na ang version na gamit mo may missing fw files pa sya.. ganito download mo latest phoenix and full fw pack from blue nokia or navifirm then flash mo ulit :thumbsup:

DAVILOU · Aug 3, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

god bless

salamat sa thred

cryztynjoyz · Aug 3, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

tanong lang po... yun po bang nag failed sa pag update ng software eh masasabi nang dead phone na sya??? nagkagulo na po kc yung screen pero nabubuhay pa...naku pakicorrect na lang po if wrong post,di ko na kc malaman kung pano gagawin ko sa 5800 ko....help po.. :weep:

mark0591 · Aug 4, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

sn pde mkadownload ng firmware ng nokia e61 RM-89?ung sa bluenokia kse cbe sa phoenix hnd dw nrrecognize eh.ty

winz456 · Aug 4, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 15104 bytes
Secondary boot loaded
Loading update server code: 2068169 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Error sending ADL_LDR_GET_MS_INFO_REQ
Error parsing MS info data. Attempting to continue flashing
Flashing SingleAsic device...
Asic CMT: Start programming 74181 KB...
Asic CMT: Erasing RM223_21.0.010_prd.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Partitioning RM223_21.0.010_prd.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM223_21.0.010_prd_1501.V15
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM223_21.0.010_003_000_U03_uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM223_21.0.010_prd.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming RM223_21.0.010_prd_1501.V15
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming RM223_21.0.010_003_000_U03_uda.fpsx
Finished Flashing
Rebooting to RFS Mode
Asic CMT: Verifying communication to device...
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: mode change post delay
mode change post delay
mode change post delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Dtl: Could not send data to the driver, reason: 0x8400440E. Common USB DCM: Connection to device lost, check that the cable is properly plugged and the device's power is on. ??????????????e, result code: -2080336857
Backup/restore result: 1 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing failed.

help po n81 rm223 failed in phoenix white screen lang sya anu po sollution dito thanks

mark0591 · Aug 4, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

Firmware updating failed.

HRESULT 0x84212007 (-2078203897)

Firmware: None of supported Programming Devices were detect or the connection is not opened

anu problem d2 kpg click q na refurbish?2011 nman phoenix q.ty

jOhan26 · Aug 4, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

mga boss STEP 1 Palang stock UP na

walang manage connections PAHELP :help:

jOhan26 · Aug 4, 2011

Re: DEAD PHONE FLASHING TUTORIAL INSIDE! ---> Dead Phone? BUHAYIN natin yan! ->

ASTIG ayos na ayos! nakuha ko din :clap:

pero ang masama, wala na lahat ng contacts and mga nka save kong files sa Cp ko :weep:

wla pla back up na nagwa huhu
pero thanks padin new knowledge nanaman hehe :thumbsup:

------------------------------------------------------------------------------------
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
New log thread feature
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
New log thread feature
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
Failed to send wait request!
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
New log thread feature
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 306432 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 40367 KB...
Asic CMT: Erasing rm354__07.23.mcusw
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing area 6...
Asic CMT: Erasing rm354__07.23.ppm_t
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm354__07.23.image_t
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Programming rm354__07.23.mcusw
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming rm354__07.23.ppm_t
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming rm354__07.23.image_t
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
USB Flashing succeeded.
USB Flashing succeeded.
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: EmergencyNumbers, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ISSVariantActivator, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: Certificates, version: 1.0
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 4 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Product flashing succeeded.

NOKIA DEAD PHONE FLASHING via Phoenix -- TUTORIAL INSIDE!

Apprentice

Novice

Recruit

Recruit

Attachments

Recruit

Attachments

Novice

Recruit

Recruit

Amateur

Novice

Professional

Terminated Account

Terminated Account

Proficient

Recruit

Novice

Novice

Novice

Novice

Novice

Similar threads