Guys, I-share ko lang ito galing sa ibang site.
Eto po ung sinagot sa akin ng ibang user tungkol sa swapping ng memory ng cm bolt fusion.
Pwede rin ang link2sd pero mas maganda sa akin ito.
SWAP MICROSD as Internal Storage
Edited by aquinasramon on Mar 19 2013, 08:37 PM
This is my detailed version from Mhelshy's original post.
Pre Requisites:
1. CM Fusion Bolt
2. Micro SDHC atleast Class 6. (I used class 10)
3. Patience.
Note: Huwag galawin ang ibang settings unless specified
Step by Step Instructions:
1. Insert your Micro-SD sa PC/Laptop. Preferably card reader.
2. Pag nadetect na, Right click the card and select format. Under FILE SYSTEM drop down menu, select NTFS. Uncheck quick format. Yan lang po ang gagalawin. then click FORMAT. This should take around 5-10 mins. Wag nyo galawin yung format window. Wag mainip. Pag natapos safely remove.
3. Open si CMFB. Make sure you have the following:
-SuperUser
-ES File Explorer
4. Set up ES File Explorer (IMPORTANT)
Open ES File Explorer>>Settings>>Root Settings>Make sure na ALL BOXES CHECKED.
5. Punta na kayo sa /etc then hanapin nyo vold.fstab copy this and paste sa labas ng etc folder.
6. Click vold.fstab(original) and click edit with ES Editor.
Look for these lines:
dev_mount flash /mnt/sdcard auto /devices/virtual/block/actj
dev_mount sdcard /mnt/sd-ext auto /devices/platform/asoc-mmc0.0/mmc_host/mmc0
CHANGE THE BOLD LETTERS TO:
dev_mount flash /mnt/sd-ext auto /devices/virtual/block/actj
dev_mount sdcard /mnt/sdcard auto /devices/platform/asoc-mmc0.0/mmc_host/mmc0
7. Options>>Save.
8. Power off the tablet. Insert the SD Card.
9. Turn on the device.
Check nyo if under USB Storage, ung size is yung microsd nyo
Voila! Swapped na!
Personally tested ko ito. No forced close ng apps. Advice ko kung may laman na ang tab nyo, burahin nyo muna then reinstall to make sure walang problema.
Credits again to Mhelshy