OK mga guys, mga ka-
SC02B total wala tayong official thread dito eto nalang. To all Ntt Docomo SC02B, this is our OFFICIAL THREAD. Anyways before anything else, I'm not an android expert or whatever I just want to share my knowledge, insights, and researches about our phone. Nagreresearch lang po ako hindi po ako developer ng mga ROM, Kernel, etc. So, wag masyadong magexpect na alam ko lahat regarding our phone ha. Tulong-tulong po sana tayo para sa thread natin para di tayo naaoutofplace sa mga ibang thread. Di rin po ako nagaupload ng mga files, lahat ng mga ibibigay kong info dito link lahat sa ibang sites dun kayo magdownload.
The content of our thread will cover ROM, Kernel, Compatible ROMs (if possible), Games, Applications, etc. Request will be welcome as well if possibly working on our phone. Latest firmwares will be updated here as well. So let's start.
[UNLOCK]UNLOCKING/OPENLINE
credits to
radevilcool from xda developers
Follow the steps correctly:
1. On your phone, go to dial
2. Dial this number combination *7465625*638*#
3. Enter the MNC/NCC (e.g. MNC-515 NCC-02 for globe users)
4. Enter 8 zeros on the Control key
5. Tap on OK to Unlock
[UNLOCK]UNLOCKING/OPENLINE USING MODEM
credits to
ryanmisagonzales one of our SC02B member..thanks dito sir..c:
REQUIREMENTS: UNLOCK MODEM. Get it here ->
http://www.mediafire.com/?xdq4717do515lse
Follow the steps correctly:
1. Turn off your phone
2. Go to Download Mode by pressing volume down + home + power simultaneously
3. Open Odin
4. Connect your phone to the pc using the phone cable
5. Check the bar below the ID:COM it must be YELLOW it means your phone is detected
6. Click on the PHONE and locate the downloaded modem
7. Click on start to flash the modem, then your phone will auto reboot
NOTE: Do not unplug your phone not until the UI of your phone is clearly opened.
NOTE: About sa MODEM. SC02BOMJ11 and lilitaw sa PHONE nio pag dial nio ng *#1234#. So if ever nakaSC2BOMLC4 ang gamit niong firmware at ginamit nio tong MODEM para maunlock or openline and phone nio pag dial nio ng *#1234# ang lilitaw is ganito:
PDA : SC02BOMLC4
PHONE : SC02BOMJ11
CSC : SC02BDCMLC4
Anyways, working parin to at nakaunlock na ang phone nio pwede kayong maginsert ng kahit anong sim.
WARNING: Flash at your own risk. I'm not responsible for any damage that may happen to your phone. So flash carefully!.
NOTE: Always make a NANDROID BACKUP when flashing a new ROM or Firmware!.Always be preapared!.
[ROM]SC02B Original ROM [SC02BOMJJ1]
credits to
jmaurice from xda developers
REQUIREMENTS:
1. Ntt Docomo SC02B
2. Phone's Cable
3. Phone's Drivers (If Samsung Kies is not available get it here ->
http://forum.xda-developers.com/showthread.php?t=728929)
4. Odin (get it here ->
http://www.mediafire.com/?sj7auhwg465olvr)
5. SC02BOMJJ1 Firmware (get it here ->
http://forum.xda-developers.com/showthread.php?t=967869#11618368
Follow the steps correctly:
1. Turn off your phone
2. Go to Download Mode by pressing volume down + home + power simultaneously
3. Open Odin
4. Connect your phone to the pc using the phone cable
5. Check the bar below the ID:COM it must be
YELLOW it means your phone is detected
6. Now flash the downloaded firmware in this order
PIT:
PIT file for SC-02B
PDA:
CODE_SC02BOMJJ1.tar.md5
PHONE:
MODEM_SC02BOMJJ1.tar.md5
with the Repartition check box checked
7. Click on Start, after flashing your phone will auto reboot and you have the original japanese firmware
NOTE: Do not unplug your phone not until the UI of your phone is clearly opened.
[UPDATE]SC02BOMKL4
credits to all sites that i've visited
REQUIREMENTS:
1. ODIN
2. Latest Update Firmware [SC02BOMKL4] (get it here ->
http://www.fshare.vn/file/PO9FDMIUQG/)
Follow the steps correctly:
1. Turn off your phone
2. Go to Download Mode by pressing volume down + home + power simultaneously
3. Open Odin
4. Connect your phone to the pc using the phone cable
5. Check the bar below the ID:COM it must be
YELLOW it means your phone is detected
6. Click on the PDA and locate the downloaded firmware
7. Click on start to flash the firmware, then your phone will auto reboot
NOTE: Do not unplug your phone not until the UI of your phone is clearly opened.
8. Turn off phone again, and go to Recovery Mode by pressing volume up+home+power
9. In the recovery mode you need to select the option Wipe data/factory reset and then select the option Wipe Cache Partition and then reboot your device by selection reboot system now
10. Go to application->about phone to check if your baseband, firmware version and kernel was updated or dial *#1234#
[CWM]ClockWorkMod for SC02BOMKL4
credits to
Mr. Kyapa
REQUIREMENTS:
1. zImage.tar (it's already in the folder you downloaded with the firmware
2. ODIN
Follow the steps correctly:
1. Turn off your phone
2. Go to Download Mode by pressing volume down + home + power simultaneously
3. Open Odin
4. Connect your phone to the pc using the phone cable
5. Check the bar below the ID:COM it must be
YELLOW it means your phone is detected
6. Click on the PDA and locate the zImage.tar
7. Click on start to flash, then your phone will auto reboot
NOTE: Do not unplug your phone not until the UI of your phone is clearly opened.
[ROOT]ROOTING SC02B with SC02BOMKL4 Firmware and CWM [SC02BOMJJ1]
credits to
Doomlord from xda developers
REQUIREMENTS:
1. DoomLord's easy rooting toolkit (get it here ->
http://forum.xda-developers.com/showthread.php?t=1321582)
Follow the steps correctly:
1. Set your phone into debugging mode go to Settings-Application-Development-Usb Debugging
2. Make sure Unknown Sources is Checked
3. Connect your phone to your PC
4. Open Doomlord's easy rooting toolkit
5. Follow the on screen instruction
6. After that your phone will auto reboot. Voila. Your phone is rooted check for the SuperUser
[Kernel]kyapat10mod3
credits to
Mr. Kyapa and Ipparyu from xda developers
REQUIREMENTS:
1. kyapat10mod3 (get it here ->
https://www.box.com/s/bbb7ad2f36db5ba9818f)
2. ODIN
Follow the steps correctly:
1. Turn off your phone
2. Go to Download Mode by pressing volume down + home + power simultaneously
3. Open Odin
4. Connect your phone to the pc using the phone cable
5. Check the bar below the ID:COM it must be
YELLOW it means your phone is detected
6. Click on the PDA and locate the kyapat10mod3 kernel
7. Click on start to flash, then your phone will auto reboot
NOTE: Do not unplug your phone not until the UI of your phone is clearly opened.
8. Go to application->about phone to check if your kernel was updated into kyapat10mod3
DL HERE:
http://www.4shared.com/file/nuXWkqpT/kyapaT10mod3.html
[UPDATE][/SIZE]
SC02BOMLC4
credits to
thedroidnation.com
REQUIREMENTS:
1. Latest Update Firmware [SC02BOMLC4] (get it here ->
http://hotfile.com/dl/153065031/a2fecf5/SC02BOMLC4_SC02BDCMLC4_DCM.rar.html
Follow the steps correctly:
NOTE: Flashing from the OMLK4 to OMLC4 is not that easy you will get errors if you do that and it may cause bootloops and brick your phone so just follow my steps on how I update my phone into SC02BOMLC4
1. You need to downgrade your phone into the Original firmware (the steps of flashing the original ROM is at the top of this thread)
2. If you have successfully downgrade your phone, you can now flash the Latest Firmware Update using Odin
3. Turn off your phone
4. Go to Download Mode by pressing volume down + home + power simultaneously
5. Open Odin
6. Connect your phone to the pc using the phone cable
7. Check the bar below the ID:COM it must be
YELLOW it means your phone is detected
8. Click on the PDA and locate the downloaded firmware
9. Click on start to flash, then your phone will auto reboot
NOTE: Do not unplug your phone not until the UI of your phone is clearly opened.
10. Turn off phone again, and go to Recovery Mode by pressing volume up+home+power
11. In the recovery mode you need to select the option Wipe data/factory reset and then select the option Wipe Cache Partition and then reboot your device by selection reboot system now
12. Go to application->about phone to check if your baseband, firmware version and kernel was updated or dial *#1234#
[UPDATE]CyanogeMod 10/10.1
credits to
all people in this thread-->http://forum.xda-developers.com/showthread.php?t=1614417
REQUIREMENTS:
1. CM10 and Gapps
http://forum.xda-developers.com/showthread.php?t=1778526 (get it here ->
credits to them
2. 3 Files for the modem (get it here ->
http://forum.xda-developers.com/showthread.php?t=1614417&page=14 or
http://www.4shared.com/zip/QloKYs98/install-blobs.htmlcredits to them
Follow the steps correctly:
NOTE: First things first guys, always do a NANDRIOD backup of your current ROM. Boot into recovery mode then do the backup..that's it..Para pag nagkaaberya..madaling maayus..Ice ba yan?
1. Download niyo muna lahat ng necessary requirements natin. CM10, Gapps ska yung 3 files.
2. Save ang mga downloaded files sa root ng sdcard..wag nio iextract ha.
3. Open ang ROOT EXPLORER. Go to the system then hanapin ang build.prop.
4.Edit build.prop..pano? long press nio tas edit with text editor (or kung ano mang pwedeng pangedit ang gamit nio)
Eto ang mga eedit nio..
ro.product.model=SC02B
ro.product.name=SC02B
ro.product.device=SC02B
ro.build.product=SC02B
Palitan nio lang yung SC02B ng GT-I9000
5. Now flash CM10..how?.Punta sa Recovery Mode..then install from zip on sdcard..hanapin ang CM10 then flash..pwede nio narin iflash yung 3 files..
6.BOOM!.Merry Xmas may CM10 na ang phone nio..o dba..kaso di pa tapos dito ha..punta sa settings icheck kung my baseband..dapat wala..magandang sign yan..pano magkakabaseband?
7. Airplane mode turn it ON..tapos reboot sa recovery ulit..flash nio yung 3 files ulit..then reboot
8.BOOM!. dapat may signal na yan at baseband na SC02BOMLC4..optional if wala parin..flash nio lang ulit yung 3 files..ganun lang ang ginawa ko jan..wag kalimutan ang airplane mode nakaON pag nagflash ha..
9.If wala parin signal..try niong iflash yung isa pang modem d2 yung SC02BOMJJ1.
10. Oppsss..meron pa pala..Walang Google Apps ang CM10..so gagawin nio iflash nio yung Gapps para magka Play Store kau..yun lang..
*NEW*[UPDATE]CyanogeMod 10.1 Android 4.2.2
Here's a guide how to upgrade your SC02b to Android 4.2.2 with the new CM10.1.
REQUIREMENTS:
1. CM10.1 Android 4.2.2 (Download the latest Nightly Build)-->
http://get.cm/?device=galaxysmtdcredits to the developer
2. Gapps (the 4.2.1 Gapps can be)credist to the developer
3. For the Modem and GPS blobs, and Various Kernel (Get it on our xda forum below)-->
http://forum.xda-developers.com/showthread.php?t=2094861credits to sir didhiy
Follow the steps correctly:
NOTE: First things first guys, always do a NANDRIOD backup of your current ROM. Boot into recovery mode then do the backup. That's it. Your good to go.
Step 1. Just to make it simple..Follow the above instructions on how to flash cm10 stable from step 1 - 4. If done proceed to the next step.
Note: If you came from cm10 stable notice that build.prop change back to sc02b just edit that. But if you came from cm10.1 4.2.1 do changes our still present on the build.prop. Just go to settings-about phone-if the model number is still GT-I9000 no need to edit.
Step 2. If you want a fresh CM10.1 as in fresh. Do a factory reset of course all users apps will be deleted so backup using titanium.
Step 3. Now go to recovery mode. Wipe data, cache and dalvik.
Step 4. Flash the Latest CM10.1 Nightly build and Gapps.
Step 5. Flash Kernel of your choice.
Step 6. Check Settings->About Phone..If no baseband (good sign for me). Just switch to aiplane mode. Then reboot to recovery mode.
Step 7. On recovery, flash the OMLL1 Modem blobs and gps blobs. Reboot.
Step 8. From this point be happy, check if there is baseband now SC02BOMLL1 (fingers cross). If there is but still no signal. Just go to mobile network->network operators then wait until your network shows then select or choice automatically. That's it.
Sa lahat ng tumulong credits to xda developers sila ang susi para sa ating phone. Special thanks to IpaRyu, HiroyukiIkezoe, at didiy. Mabuhay.
HAPPY FLASHING. Saying THANKS is enough for me.