Isa lang po akong dating leecher na nagtatanong, hanggang sa dumaan ang mga taon ako na rin
po mismo ang nakadiskubre sa solution about unlocking of Huawei LTE CPE
B593u-91 (B593) MOBILY Saudi Arabia. Nung mga nakaraan mga taon, ang uncustomized firmware
ay available sa market, means unlocking was easy, with the unlock code. Pero, ung mga bagong huawei
routers ay na-update sa november firmware, sa firmware na to pinalitan ng Mobily ang UI ng device
at wala kahit sino ang pwedeng makapag-unlock nito dahil nawala ang "SIM LOCK SETTING" kung
saan ieenter natin ang unlock code.
papalitan po natin ang firmware mismo sa modem natin (download link is provided at the end of the article), which is risky, however, it is tested and working with Huawei B593u-91 of Mobily carrier.
View attachment 275683
pakisundan lang po
How to flash the firmware of Huawei B593u-91 Mobily customized WiFi router?
Reset the device.
Plug the device to PC with an original LAN cable.
Browse the default IP, through default internet explorer of Windows PC, .
Now, login into the device with default ID and password of admin.
Go to System.
Click Upgrade.
Now, you will see “upgrade file” option in the middle.
Browse and select the downloaded zip file.
Now, click on Upgrade, from the right side (as described in the image).
Wait for the successful result.
Now, you have 10 unlock attempts left in your device, to enter the code, and unlocking.
get the code here: http://huaweicodecalculator.com/new-algo/#
View attachment 275684
Update: Recent firmware by Mobily does not allow to change the firmware of Huawei B593u-91. So, you have to go to recovery mode, then unlocking is possible.
Disconnect LAN Cable from PC, shutdown the B593, remove SIM card, and turn on it normally.
2. Press and Hold the WPS + RESET + WLAN at the same time for approx 25 seconds.
3. Wait till all LED lights are flashing and continuous blinking, then quickly release the WPS + RESET + WLAN.
Note: If the the WPS LED light is not Blinking, you need to repeat the steps from 1 to 3.
4. While blinking WPS led light, connect the router in PC / Laptop.
5. Now run B593u router upgrade tool (download link is provided at the end of the post).
Huawei B593 router firmware change
5. Choose Network card of router then select “Modem&Router.
6. Click Open and select the path of the firmware, which you have downloaded.
7. Press Start button.
Note: Don’t close the B593u upgrade tool, turn OFF and ON quickly to Huawei B593u. Now you will see all LED light is turning off and wait the Signal LED light from 1 to 5 is on.
Note: Wait for 3 mins and all the 5 bar Signal LED light is fully ON.
8. After the 5 signal bars are fully on, press STOP and Close the B593u upgrade tool.
9. Now, open the browser and browse for 192.168.1.1.
10. Your firmware has been crashed and it will be in recovery mode.
11. Click on “recover” and wait until 100%.
12. After 100% recovery, B593u will be rebooted normally.
Note: If you cannot access the recovery page, then clear the history, cookies etc of PC using CCleaner or any program. Then again try to browse for the 192.168.1.1.
13. After successful recovery of device, login to 192.168.1.1 using admin / admin.
Download Huawei B593u-91 router firmware B593u-91.tar.bz2
https://www.mediafire.com/?bz8a88jbm94zmbe
Download Huawei B593u Firmware Upgrade Tool
https://www.mediafire.com/?gd1zuh92m1txt1l
Download Firmware Huawei B593u-91 V55 with Antenna Support
https://www.mediafire.com/?qdxdqxb6uleab7g
po mismo ang nakadiskubre sa solution about unlocking of Huawei LTE CPE
B593u-91 (B593) MOBILY Saudi Arabia. Nung mga nakaraan mga taon, ang uncustomized firmware
ay available sa market, means unlocking was easy, with the unlock code. Pero, ung mga bagong huawei
routers ay na-update sa november firmware, sa firmware na to pinalitan ng Mobily ang UI ng device
at wala kahit sino ang pwedeng makapag-unlock nito dahil nawala ang "SIM LOCK SETTING" kung
saan ieenter natin ang unlock code.
papalitan po natin ang firmware mismo sa modem natin (download link is provided at the end of the article), which is risky, however, it is tested and working with Huawei B593u-91 of Mobily carrier.
View attachment 275683
pakisundan lang po
How to flash the firmware of Huawei B593u-91 Mobily customized WiFi router?
Reset the device.
Plug the device to PC with an original LAN cable.
Browse the default IP, through default internet explorer of Windows PC, .
Now, login into the device with default ID and password of admin.
Go to System.
Click Upgrade.
Now, you will see “upgrade file” option in the middle.
Browse and select the downloaded zip file.
Now, click on Upgrade, from the right side (as described in the image).
Wait for the successful result.
Now, you have 10 unlock attempts left in your device, to enter the code, and unlocking.
get the code here: http://huaweicodecalculator.com/new-algo/#
View attachment 275684
Update: Recent firmware by Mobily does not allow to change the firmware of Huawei B593u-91. So, you have to go to recovery mode, then unlocking is possible.
Disconnect LAN Cable from PC, shutdown the B593, remove SIM card, and turn on it normally.
2. Press and Hold the WPS + RESET + WLAN at the same time for approx 25 seconds.
3. Wait till all LED lights are flashing and continuous blinking, then quickly release the WPS + RESET + WLAN.
Note: If the the WPS LED light is not Blinking, you need to repeat the steps from 1 to 3.
4. While blinking WPS led light, connect the router in PC / Laptop.
5. Now run B593u router upgrade tool (download link is provided at the end of the post).
Huawei B593 router firmware change
5. Choose Network card of router then select “Modem&Router.
6. Click Open and select the path of the firmware, which you have downloaded.
7. Press Start button.
Note: Don’t close the B593u upgrade tool, turn OFF and ON quickly to Huawei B593u. Now you will see all LED light is turning off and wait the Signal LED light from 1 to 5 is on.
Note: Wait for 3 mins and all the 5 bar Signal LED light is fully ON.
8. After the 5 signal bars are fully on, press STOP and Close the B593u upgrade tool.
9. Now, open the browser and browse for 192.168.1.1.
10. Your firmware has been crashed and it will be in recovery mode.
11. Click on “recover” and wait until 100%.
12. After 100% recovery, B593u will be rebooted normally.
Note: If you cannot access the recovery page, then clear the history, cookies etc of PC using CCleaner or any program. Then again try to browse for the 192.168.1.1.
13. After successful recovery of device, login to 192.168.1.1 using admin / admin.
Download Huawei B593u-91 router firmware B593u-91.tar.bz2
https://www.mediafire.com/?bz8a88jbm94zmbe
Download Huawei B593u Firmware Upgrade Tool
https://www.mediafire.com/?gd1zuh92m1txt1l
Download Firmware Huawei B593u-91 V55 with Antenna Support
https://www.mediafire.com/?qdxdqxb6uleab7g
