sa mga walang antenna ng wimax

[paranoia_rebirth]

Sana apat na malaking coaxial cable nlng ginamit mo nyan TS para wala masyadong lose at noise. Dapat kasi shielded ang mga wire na ginagamit basta Radio. Nice job parin to TS..

boss spi, pwede bang isang coax nalang gamitin (wifi extension cable) tapos ihinang lahat ng micro coax dun sa dulo (xempre middle sa middle and outer sa outer)? and since coax wifi extension cable ginamit, sa port na ng external antenna ikakabit dahil sma naman yung connector nun eh.

 

[crosx06]

paki follow na lang po yun number coding, each number represents one coax (we have coax 1 to 4) since each coax has two wires the inner(positive) and outer (negative/ground)respectively; if were going to apply it on the wires, we have to pair it by colors to create 4 pairs, each pair has a solid(negative/ground) and the other has white stripe(positive)

sir mju di po kc masyado makita ung colors ng wires na nkahinang sa antenna, pwde nyo po ba sbhin ung pair of color sa antena per wire number para po alam namin ung tamang wire colors in pair na dapat itap sa antenna from wire 1-4 sir. salamat po ulit

 

[doityourself]

ganda.thanks

 

[wazalac18]

sir mju di po kc masyado makita ung colors ng wires na nkahinang sa antenna, pwde nyo po ba sbhin ung pair of color sa antena per wire number para po alam namin ung tamang wire colors in pair na dapat itap sa antenna from wire 1-4 sir. salamat po ulit

okay lang po magkapalit ang kulay basta pares palagi, pwede din hindi basta tandaan mo lang.
mas maganda kung ikaw ang mag-allocate ng color for each pair para madali mo matandaan.
ang mahalaga po ay yun polarity di magkabaliktad at yun pair number goes to the same coax number
*tip: i-label mo yun pairs by number with a piece of paper and scotch tape.

 

[paranoia_rebirth]

sir mju di po kc masyado makita ung colors ng wires na nkahinang sa antenna, pwde nyo po ba sbhin ung pair of color sa antena per wire number para po alam namin ung tamang wire colors in pair na dapat itap sa antenna from wire 1-4 sir. salamat po ulit

sa pagkakaalam ko naka-pair (pulupot) ng tig-2 sa loob ang lan wire depende sa kulay nya (orange and orange-white/blue and blue-white/green and green-white/brown and brown-white) so di ka mawawala sa pagpe-pair. mejo magulo lang yung orange and brown. pero since naka-pair sya sa loob, hindi pa rin mahirap hanapin ang pares ng bawat isa. gawin mo nalang is yung may white na kulay ang negative then yung solid color ang positive. then label mo nalang kung alin ang pair na ginamit mo sa ganito, sa ganyan. tipong orange is pin 1 and 2, brown - 3 and 4, blue - 5 and 6, green - 7 and 8.

sana nakatulong...

 

[mhoerichard]

sir mju di po kc masyado makita ung colors ng wires na nkahinang sa antenna, pwde nyo po ba sbhin ung pair of color sa antena per wire number para po alam namin ung tamang wire colors in pair na dapat itap sa antenna from wire 1-4 sir. salamat po ulit

isa- isahin mu nlang ng bdi ka malito.. or gamit ka ng tester.

 

[Joshdavid]

up natin

 

[foreverBERNIE]

sir mju di po kc masyado makita ung colors ng wires na nkahinang sa antenna, pwde nyo po ba sbhin ung pair of color sa antena per wire number para po alam namin ung tamang wire colors in pair na dapat itap sa antenna from wire 1-4 sir. salamat po ulit

di naman importante yung color ng wirings jan sa pag eextend mo ng antena, as long as match sya dun sa board, parang nag extend kalang tlga ng wirings.

 

[mhoerichard]

di naman importante yung color ng wirings jan sa pag eextend mo ng antena, as long as match sya dun sa board, parang nag extend kalang tlga ng wirings.

nadale mu...

 

[bennedic]

haha! hirap gayahin, nasira ko bm622i ko,

 

[wazalac18]

haha! hirap gayahin, nasira ko bm622i ko,

anyare sir?
pakipost mo kung ano yun nangyare para meron tayong basis on what NOT to do.

 

[chieko01]

eto ts kung gusto mong i-post on the first page


para hindi buong modem (bm622i)ang nakalabas, kinumbert ko yun internal antenna to external. at tingin ko pwede din sa tabo.
kinabitan ko ng female rj45 from my old modems yun internal antenna at pinalitan ko yun port ng telephone ng female rj45 para i-connect sila with male to male utp/lan wire/cord, and it worked

numbers 1 - 4 represents 4 wires that connects the intenal antenna to the board, every wire has an inner and outer wiring the inner wire is the postive and the outer the negative/ground.
http://imageshack.us/a/img203/9221/o5kp.jpghttp://imageshack.us/a/img835/6132/mbfw.jpghttp://imageshack.us/a/img208/1637/kyxh.jpg http://imageshack.us/a/img27/6026/1zm1.jpg
http://www.esato.com/phonephotos/cam/samsung/sch_i605/2013090314342H1qGX.jpghttp://www.esato.com/phonephotos/cam/samsung/sch_i605/201309031434hciMaT.jpg

http://imageshack.us/a/img835/6618/3mad.jpghttp://imageshack.us/a/img707/6249/l9k9.jpghttp://imageshack.us/a/img594/1095/2z69.jpg
http://imageshack.us/a/img407/700/4og0.jpg
http://imageshack.us/a/img541/4641/c658.jpghttp://imageshack.us/a/img163/738/yj0h.jpg
4 bars and up to 89% signal strength stable on 80% on 10 meter utp/lan hindi na masama kasi nun internal no signal bar and 0% signal strenght ako.


the pictures tell it all

sir ty sa idea, pero may gusto sana akong i point out, imbes na tig dalawa yung wire ng ant on every terminal, single nalang, narinig mo na ho ba yung propagation delay?, malakas din ho maka affect yun. Share ko lang ho.

 

[3ple3dg3]

sir ty sa idea, pero may gusto sana akong i point out, imbes na tig dalawa yung wire ng ant on every terminal, single nalang, narinig mo na ho ba yung propagation delay?, malakas din ho maka affect yun. Share ko lang ho.

more explanation please. here. :thanks!

 

[chieko01]

more explanation please. here. :thanks!

http://en.wikipedia.org/wiki/Propagation_delay

 

[amperk]

eto ts kung gusto mong i-post on the first page


para hindi buong modem (bm622i)ang nakalabas, kinumbert ko yun internal antenna to external. at tingin ko pwede din sa tabo.
kinabitan ko ng female rj45 from my old modems yun internal antenna at pinalitan ko yun port ng telephone ng female rj45 para i-connect sila with male to male utp/lan wire/cord, and it worked

numbers 1 - 4 represents 4 wires that connects the intenal antenna to the board, every wire has an inner and outer wiring the inner wire is the postive and the outer the negative/ground.
http://imageshack.us/a/img203/9221/o5kp.jpghttp://imageshack.us/a/img835/6132/mbfw.jpghttp://imageshack.us/a/img208/1637/kyxh.jpg http://imageshack.us/a/img27/6026/1zm1.jpg
http://www.esato.com/phonephotos/cam/samsung/sch_i605/2013090314342H1qGX.jpghttp://www.esato.com/phonephotos/cam/samsung/sch_i605/201309031434hciMaT.jpg

http://imageshack.us/a/img835/6618/3mad.jpghttp://imageshack.us/a/img707/6249/l9k9.jpghttp://imageshack.us/a/img594/1095/2z69.jpg
http://imageshack.us/a/img407/700/4og0.jpg
http://imageshack.us/a/img541/4641/c658.jpghttp://imageshack.us/a/img163/738/yj0h.jpg
4 bars and up to 89% signal strength stable on 80% on 10 meter utp/lan hindi na masama kasi nun internal no signal bar and 0% signal strenght ako.


the pictures tell it all

ayos to brad! hahahaha

 

[wazalac18]

ayos nga yan sir
para yan sa mga walang outdoor antenna at ayaw gawin ang POE.

 

[axeler_03]

try mo baron antenna wala k n babaklasin yun gamit q stable s 4 bar signal q..

 

[Haring Bastos]

pwede ba barron antenna sa wimax?

 

[axeler_03]

pwede tlga c baron in my case 4-5 signal s wimax indicator.actually in my case improvise q p sya maigi pra mganda tignan...di pa mainit s mata ni globibo...

 

[ememtotie]

pwede tlga c baron in my case 4-5 signal s wimax indicator.actually in my case improvise q p sya maigi pra mganda tignan...di pa mainit s mata ni globibo...

boss panu mu gianwa ung sa baron antenna? tut naman jan