tested on my galaxy j7 walang naging problema basta follow lang mabuti ang instruction
backup muna mga tol before magroot... incase na hindi maiwasan problem... download ka ng firmware then flash mo na lang...
mga kailangan:
windows pc
cable
galaxy j7 atleast 80% charge
at higit sa lahat... utak
• 1st Download the rar file
• Then into the folder Install Samsung USB drivers in your PC.
• Now go to your mobile Settings>About Device>Build Number (Tap Continuously 7 times to enable Developer Options)
• Then connect your Mobile to your PC via USB cable and copy the "UPDATE-SuperSU-v2.46.zip" file to the internal storage of the phone. Don't extract this file.
• Enable USB Debugging on your device. (Settings > Developer Options > USB Debugging)
• You need to enable OEM bootloader unlock in your developer options to install the TWRP recovery! Go to > ‘Settings’ > ‘Developer Options’ > ‘Turn on OEM unlock’ on.
***Install TWRP Recovery:
1. Open Odin_v3.09 folder on your PC and double click "Odin3 v3.09.exe" file. This will open an Odin window.
2. Boot your Galaxy J7 into Download mode: Turn off your mobile. Press (Volume Down) + (Home) + (Power) button together and hold them until you see Samsung logo. Release them once you encounter a warning screen on your device. Press Volume Up to acknowledge the warning. This takes you to download mode.
3. Connect your Mobile device to the PC using an USB cable and make sure your device is detected. An “Added!! message will appear in Odin’s message box.
4. Now Set up Odin as follows:
Check the AP box add the "twrp-2.8.7.0-j7elte.tar" file. (Do not extract it)
Check Auto Reboot and F.Reset Time options.
See Odin Setup Image Here (Delete Spaces). Link: https: //mega. nz/#!tZ5wkaBa!Ul8cnigZIIOSdPYiIGJvtIzfdf58h_4hWFDbBh1 uLb4
5. Then click START button on Odin to begin the installation process.
6. After your device is rebooted you will see “PASS!” message in Odin and quickly remove your battery whenever you see Samsung logo on Startup.
***Rooting Your Device:
• Now put your mobile battery back and press (Volume Up) + (Home) + (Power) buttons together until you see Samsung logo. It will boot your mobile into TWRP recovery mode.
• Select Install Zip from TWRP.
• Now locate to Internal or External storage where you copied the "UPDATE-SuperSU-v2.46.zip" files before and select this file to Install. Slide to unlock, it will install the "UPDATE-SuperSU-v2.46.zip" into your mobile.
• Now reboot your Mobile.
After some minutes your phone will reboot. You will find your device rooted and SuperSU App installed.
You have successfully rooted Samsung Galaxy J7 with TWRP recovery installed. (credit to royal.chowdhury)
http://www.mediafire.com/download/1ac64h5c9w882c6/Files_to_Root_J7.zip
backup muna mga tol before magroot... incase na hindi maiwasan problem... download ka ng firmware then flash mo na lang...
mga kailangan:
windows pc
cable
galaxy j7 atleast 80% charge
at higit sa lahat... utak
• 1st Download the rar file
• Then into the folder Install Samsung USB drivers in your PC.
• Now go to your mobile Settings>About Device>Build Number (Tap Continuously 7 times to enable Developer Options)
• Then connect your Mobile to your PC via USB cable and copy the "UPDATE-SuperSU-v2.46.zip" file to the internal storage of the phone. Don't extract this file.
• Enable USB Debugging on your device. (Settings > Developer Options > USB Debugging)
• You need to enable OEM bootloader unlock in your developer options to install the TWRP recovery! Go to > ‘Settings’ > ‘Developer Options’ > ‘Turn on OEM unlock’ on.
***Install TWRP Recovery:
1. Open Odin_v3.09 folder on your PC and double click "Odin3 v3.09.exe" file. This will open an Odin window.
2. Boot your Galaxy J7 into Download mode: Turn off your mobile. Press (Volume Down) + (Home) + (Power) button together and hold them until you see Samsung logo. Release them once you encounter a warning screen on your device. Press Volume Up to acknowledge the warning. This takes you to download mode.
3. Connect your Mobile device to the PC using an USB cable and make sure your device is detected. An “Added!! message will appear in Odin’s message box.
4. Now Set up Odin as follows:
Check the AP box add the "twrp-2.8.7.0-j7elte.tar" file. (Do not extract it)
Check Auto Reboot and F.Reset Time options.
See Odin Setup Image Here (Delete Spaces). Link: https: //mega. nz/#!tZ5wkaBa!Ul8cnigZIIOSdPYiIGJvtIzfdf58h_4hWFDbBh1 uLb4
5. Then click START button on Odin to begin the installation process.
6. After your device is rebooted you will see “PASS!” message in Odin and quickly remove your battery whenever you see Samsung logo on Startup.
***Rooting Your Device:
• Now put your mobile battery back and press (Volume Up) + (Home) + (Power) buttons together until you see Samsung logo. It will boot your mobile into TWRP recovery mode.
• Select Install Zip from TWRP.
• Now locate to Internal or External storage where you copied the "UPDATE-SuperSU-v2.46.zip" files before and select this file to Install. Slide to unlock, it will install the "UPDATE-SuperSU-v2.46.zip" into your mobile.
• Now reboot your Mobile.
After some minutes your phone will reboot. You will find your device rooted and SuperSU App installed.
You have successfully rooted Samsung Galaxy J7 with TWRP recovery installed. (credit to royal.chowdhury)
http://www.mediafire.com/download/1ac64h5c9w882c6/Files_to_Root_J7.zip