- Messages
- 13
- Reaction score
- 0
- Points
- 16
maraming maraming salamt sir bratboo... ^^ downloading n po ako ngaun.. ^^
- - - Updated - - -
sir bratboo,,, bat ganun?? failure:could not root device ung nalabas,,,
- - - Updated - - -
Panong Galaxy Note 3? Yung boot splash screen? Nop. Unless kaya mo mag edit ng Kernel hehe..
For play music nop since wala nun sa PH. I think need mo gumamit ng prox ng US saka ka mag lologin. Hindi ko na matandaan yung steps actually. Need mo pa ba yun kung pwede naman e torrent yung songs? hahaha...
How to flash a ROM from Stock ROM.
*** Things you need:
ROM of your choice
Philz Kernel (Latest Version LTA) - http://forum.xda-developers.com/showthread.php?t=1901191
SD Card
A 100%-90% Battery life.
Step 1. (Root your Phone) - http://forum.xda-developers.com/showthread.php?t=1329360
- Follow steps on Post 1 on How to Root With APK (First post if for ICS/JB users only.)
* To check if you are rooted. Install Titanium Backup (Might as well backup your Apps with it)
Step 2. (Backup everything you need)
- Backup apps/games with Titanium Backup.
- Backup Contacts. (If ever you have contacts that isn't sync with google) (Just check play store for an app to backup your contacts).
- Backup Messeges. (Just look for an app in play store).
Step 3. (Transfer the files needed)
- Transfer ROM and Philz Kernel to SD Card.
Step 4. (Flash Philz Kernel)
- Press and Hold Up Volume + Home Button + Power till you enter to recovery mode. (How it looks like - http://droidviews.com/wp-content/uploads/2013/03/android-recovery-galaxy-note.jpg)
- Choose "Apply update from external storage" (Use Volume Rocker to Navigate and Power Button to choose)
- Look for Philz Kernel and apply.
- Once a note that the update is done or successful, go to recovery mode again (Press and Hold Up Volume + Home Button + Power). "Do not choose Reboot System from the menu"
- Now you will have a new Recovery Mode. (How it looks like - http://imageshack.us/a/img545/6956/image1resize.png).
* If the new image of recovery mode didn't show and still showing the stock recovery that only means you failed to flash the philz kernel. Make sure the philz kernel zip is flashable and usable.
Step 5. (Flashing the ROM)
*Make sure you are using Philz Kernel!!! Never NEVER forget to flash philz kernel when you try to flash a new rom! Why?! The only way to brick your phone is by wiping data/factory reset using an unsafe kernel. Just to be safe on flashing a new ROM, just go to recovery then flash phiz kernel then reboot to recovery. Now you are safe to wipe data.
- Choose Wipe Data/Factory Reset then yes then go back
- Choose Advanced then choose Wipe Dalvik then yes then go back
- Choose Install Zip
- Choose External Storage and look for your ROM and choose it!
- Once installation starts this would take some time not more than 5mins to install. (Be patient)
- Once a confirmation that the installation is successful, Go back and reboot system
- This will take a while as well and much longer than the installation process. (Be very patient) (How would you know if its not stuck or something... The Samsung word is glowing on and off mildly. If the bootanimation "Samsung Logo" keeps looping then you need to go to recovery again and do the process from Step 5.)
- The initial setup will be shown where you will choose your language then etc.. (You can skip the rest and set it up later)
- Let the phone do its thing on starting the apps,etc and rest your phone for about 3mins. (Better not fry your processor)
- Reboot your phone after and start your setup and restoration of apps, sms, etc.
- Done!
For Themes:
- Just flash the theme from recovery. (Install zip - External Storage)
Take Note:
- Do not update the superuser as it has problem if you update it from play store.
- I also actually prefer COH kernel for this ROM. - http://forum.xda-developers.com/showthread.php?t=2252977 (Just flash this in Recovery "Install zip - External Storage")
- Note 3.1fwm ROM has limited system apps so you have to delete some apps from system and preload if ever you get an insufficient storage. To remove apps from Preload and System, use a Root File Explorer app. To check which apps is safe to remove, you can check the details here - http://forum.xda-developers.com/showthread.php?t=1580830
Side Note:
- If you got some error on rom and others didn't have that problem like something has crash then do this other way of wiping data.
This is only applicable if you came from a TW based rom and will flash a TW based rom. Do not use this process if you came from AOSP or CM. Also do not use this process if you will flash a AOSP or CM.
- Assuming that you are already on Philz Recovery Mode
- Wipe Data/Factory Reset
- Go to Mounts and Storage
- Wipe Cache
- Wipe System
- Wipe Data
- Wipe Preload
- Go Back
- Go to Advance
- Wipe Dalvik Cache
- Then install the rom again.
sir bratboo,,, bat ganun?? failure:could not root device ung nalabas,,,