SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) UPDATED 03-30-2015

[rexelens]

Re: SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) HERE

pabookmark t.s maraming salamat dito

 

[jhim19]

pa help nmn po, baka meron kayo stock rom ng skk rush cocoa.. bootloop kasi fon ko eh.. salamat po..

 

[tulz]

mga ka skk pashare naman po ako ng stock rom o firmware nyo pang skk primo mt6577 po.. salamat

 

[spot123]

ano po pwedeng recovery sa SKK mobile lynx luxe ?

 

[Eljikata]

Hello po, tanong ko lang po kung may na makapag install ng rom sa lynx lite kasi di po ako makapunta sa recovery. power and vol down naman yung ginawa ko pero black screen pa din xa. installation na lang kasi ng rom ang gagawin ko kasi fail yung unang attempt ko mag install ng rom. Sana po may way. Salamat po.

 

[mharkypie]

pwede po ba ito pang root sa skk krayon+?

 

[leejay2012]

Re: SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) HERE

sir paano maayos yung baliktad na camera ng SKK Chronos ace kabibili lang kasi ng utol ko tapos bumaliktad at nawala yung back cam sana may tumulong po.
may patch po ba dito or way para maayos? nag FLASH na po ako ng stock rom ayaw pa din eh nag reset na din ako..

TIA

 

[nofear11]

Re: SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) HERE

sir paano maayos yung baliktad na camera ng SKK Chronos ace kabibili lang kasi ng utol ko tapos bumaliktad at nawala yung back cam sana may tumulong po.
may patch po ba dito or way para maayos? nag FLASH na po ako ng stock rom ayaw pa din eh nag reset na din ako..

TIA

meron po ba kayong stock rom ng skk illusion (not illusion plus)? salamat po.

 

[dyeythun]

good day po ts. may available po ba kayo jan na stock-recovery/custom rom for SKK Chronos Cross?
nag stuck po kasi sya sa logo nung una.. na factoryreset&wipre cache partition ko na.. pero naka stuck p din...
View attachment 284089

 

[parkerblue]

Re: SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) HERE

TS anong custom ROM ang supported para sa SKK Aura EDGE?

 

[gensisx]

Re: SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) HERE

Sir baka Meron kayo firmware para SA skk aura 4.4.2 KitKat. Dead phone Po CP ko.

 

[jems67]

Re: SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) HERE

patulong naman, paano gamitin ung cast screen ng skk lynx. di kasi maka-connect sa miracast sa lgtv. tia.

 

[rsprod0912]

hi po need help for may SKK A20 stuck on logo panu ko po to maayos??

 

[carlo0429deleon]

Mga boss, meron po kayong stock rom para sa chronos ace plus. Salamat po.

 

[botones]

Re: SKK MOBILE PHONES (ROOT/CWM/STOCK and CUSTOM ROMS) HERE

Pa help po ng lg g3 cat6 ax3 f460s..hangang lg logo lang pag in oopen...
Try ko na din po xiang hard reset ayaw pa din...
Sana po ay matulongan nyo ko sa prob ko..
Salamat..

 

[babaechar]

penge po ng link sa skk lynx.. TY

 

[LeoDAN]

Hello Guys Ginawa ko po itong THREAD na ito para sa mga SKK MOBILE Users.
Hopefully na ito na yung maging Official Thread para sa SKK.


ROOTING SKK

Procedure:
1. Download and Install ADB Drivers to your PC.
http://adbdriver.com/downloads/

2. Download VRoot 1.7.0 to your PC. (Pag na-run na yung VRoot, maguupdate ito kusa into English Version 1.7.3.4863)
http://www.datafilehost.com/d/e2841c1a

3. Connect Your Device Using Connector. (Dapat ay naka USB Debug na yung Phone. Check it on Settings/Applications/Development/Check USB Debug)

4. Run ADB Drivers, Then Click Install. (Wait Hanggang sa Mainstall yung Driver, after mainstall yung Driver Click EXIT)

5. Run VRoot, (Pag na-run na yung VRoot, maguupdate ito kusa into English Version 1.7.3.4863. After maupdate, This will automatically reads your Phone.)

6. Antayin hanggang sa matapos ang pag-read sa phone nyo. After that, Click ROOT (Green Button)

7. Wait Hanggang sa matapos ang Rooting Process. After ng Rooting Process, Your Phone Will Reboot Automatically.

8. When it Opens, Check if KINGUSER is Installed, If installed YOUR PHONE NOW IS ROOTED !.



CHANGING KINGUSER APP to SUPERUSER APP (OPTIONAL)

This process is Optional. Kung sakasakaling Hindi ninyo type ang KINGUSER APP at Mas Gusto ninyo yung SUPERSU APP.

Procedure:
1. Download the SUPERSU 1.93. (Latest na Ito).
http://www24.zippyshare.com/v/50109945/file.html

2. Root Explorer and Link 2 SD is Needed. (Kung Wala pa po kayo, Just Follow the Links)
For Link 2 SD (Just Click The SKIP from the Upper Right Corner)
http://?????????/serve/?id=21455939196371

For Root Expolorer
http://kickass.to/root-explorer-file-manager-v3-1-6-apk-all-devices-faizan-t8584320.html

3. Extract SuperUser to your SD Card.

4. Open Root Explorer, (Mount R/W). Goto system/app and Move Superuser.apk to your SD Card.

5. Install now the Extracted Superuser to your SD Card. (Superuser v1.93, yung Dinawnload)

6. After mainstall, STRICTLY DONT OPEN YET !. Just Click DONE.

7. Reboot Your Phone.

8. PagnagOpen na yung Phone, Check Your Installed Superuser kung may mag popop-up na SU BINARY NOT INSTALLED etc.. basta parang Ganun po. Pag ganun po ang nangyari Repeat The Procedure From the Beginning pero Install muna Ulet yung KINGUSER. Pero pag wala naman po nagpop-up na ganun SUCCESSFUL po yung pagpapalit natin. Tested na Po ito sa SKK A2 ko at sa CHERRY MOBILE ng Classmate Ko.

9. If Successful po yung Pagpapalit ng KINGUSER to SUPERUSER, pwede nyo na po Gawin itong SYSTEM App. Just Open Link 2 SD, Click and Hold the SUPERUSER and Click Convert to System App.



INSTALLING/FLASHING CLOCKWORKMOD

This is for All SPREADTRUM SKK PHONES.

Pano malalaman kung Spreadtrum Phone ang SKK natin ? Malalaman po natin ito When we Connect our Phone to PC, May magpopop-up po na message na FOUND NEW HARDWARE at sa ibaba nito ay Spreadtrum Phone. Kapag Hindi po Spreadtrum ang Phone ninyo ay Skip This Tutorial or Else baka MaBRICK ang Phone nyo. THIS IS FOR SPREADTRUM PHONES.

Note: Im not Responsible sa kung ano man ang mangyari sa Phone Nyo. Do It At Your OWN RISK !


Here Are All The Recoveries:


1) For SC6280 : http://is.gd/0PJXs0

2) For i9270+ : http://is.gd/fiFug2

3) For 5830, S5830, Q5830, Q206 & GT-N9300 : http://is.gd/3xLzZx

4) For S9300 Clone : http://is.gd/4WqA2Y

5) For Fieteng A7100 (May Work On Most Feiteng Devices) : http://is.gd/TpaHuD

6) For 6500-TV & S560 : http://is.gd/On1wnT

7) For N9300 (I9300 Clone) : http://is.gd/vNt0EC

8) For S930 & N8820 : http://is.gd/2j2fzQ


Note: You must Know the CPU Hardware of Your Phone. How ? Install MobileUncle Tools to your Phone.
For MobileUncle Tools
http://is.gd/SzWnZg

Paano malalaman ang CPU Hardware ng Phone mo

1. Install the MobileUncle Tools.

2. Click Device Info.

3. Hanapin ang Hardware.


PROCEDURE FOR FLASHING/INSTALLING CWM

1. Download the CWM that corresponds to your CPU Hardware.

2. Copy it to Your SD Card.

3. Extract the file, After that rename it into 'recovery.img' (Without the qoutes).

4. Open MobileUncle Tools.

5. Click The Recovery Update.

6. Kapag na click na, lalabas yung recovery.img.

7. Click the 'recovery.img', then follow the installation process or just simply click OK/YES.

8. Pagtapos mainstall ng MobileUncle Tools yung recovery.img, a message will pop-up to Reboot into Recovery, Click OK.

9. CWM is Now Installed to Your Phone, Pwede na po tayo Gumawa ng Back-Ups and Gumawa ng Custom Roms.


QUESTION: What if my Phone is Spreadtrum Phone, at wala sa Given na CWM Recoveries sa itaas yung para sa CPU Hardware ko ?

ANSWER: Kung wala po sa Given CWM Recoveries ang para sa CPU Hardware nyo, Try nyo lahat ng CWM Recoveries sa itaas, hanggang sa Makuha nyo yung Compatible, BUT NOTE: DO IT AT YOUR OWN RISK ! .

PROOF: I am now Using SKK A2, at ang CPU Hardware ko ay SP6820A, So I download the SC6820 kasi hindi naman sila gaano nagkakalayo Pero nung naiFLASH ko na, Hindi ito gumana, meaning to say hindi Compatible para sa CP ko yung SC6820. Akala ko mabi-BRICK phone ko kasi maling CWM na-install ko BUT ITS NOT, Gumana pa din phone ko kahit WALANG RECOVERY, kaya ti-nry ko yung ibang CWM Recoveries Hanggangsa Makita ko yung SWAK sa CP ko

As Far as I Know Wala Pa Akong Nakikitang NaBRICK ang Phone nila Dahil Dito


For SKK A2 - Use For 6500-TV & S560 : http://is.gd/On1wnT

For Others na nakagTRY na, POST NYO NALANG PO SANA KUNG WORKING PO BA SA INYO (With Phone Description and CWM Used), AT PARA MALAMAN DIN PO NG IBA KUNG ALING CWM RECOVERY ang MAAARI NILANG GAMITIN.


FLASHING/INSTALLING CWM USING FASTBOOT

Im not Sure, Pero parang sa Palagay ko po ay magagamit ito ng mga Na-Bricked yung Phone pero Wala pa Silang CWM na naka-Install.
Check It HERE

http://forum.gsmhosting.com/vbb/f78...preadtrum-sc6820-sc8810-phones-1-5-a-1681898/

(Credits sa GSM Forum)


Spreadtrum SC6820/SC8810 Full Backup

Dito nalang Po
(Credits to XDA)
http://forum.xda-developers.com/showthread.php?p=39270468

Installing CWM/CTR For ALL MEDIATEK DEVICES
Use this Tool or Kung gusto nyo naman ng may touch feature CTR auto installer gamitin nyo.

http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip

http://forum.xda-developers.com/showpost.php?p=53819326&postcount=851



STOCK ROM and CUSTOM ROMS

Para Po Mga Nakapag Back Up na ng Kanilang Rom, Kung maaari po sana ay Papost nalang po Dito Nang sa Gayon Ay matulungan natin ang ating Kapwa SKK Users na naBRICK yung Phone.


CREATING CUSTOM ROMS

HOW TO CREATE CUSTOM ROMS/PORTING CUSTOM ROMS
(For Questions reply nalang po kayo, tested ko na yung tutorial na to, ang dami ko na custom roms )

---------------------------------------------------------------------------------------------------------

PLEASE DO IT AT YOUR OWN RISK


This Guide is so Easy
Make Backup First!


REQUIREMENTS:
• WIndows Running PC or Laptop.
• 7zip Compressor-Download
• Notepad++ -Download
• Time(as per you how much take to understand)
• Your Base Rom(stock Rom,in any format-CWM flashable or SP_tools Flashable,Prefer to have Both)
• CWM Recovery
• SD card & Card Reader.(some phones do not have SD slot so no worry for them,i have alternative way)
• SP_Flash Tools to Unbrick In case Device Get Bricked- Download



Yung ROM na Kukunin nyo ay dapat same chipset ng sa inyo. ( Ex: MT6572 to MT6572 or SC6820 to SC6820)



FOR MEDIATEK DEVICES


PORTING For Same SoCs ( Ex: MT6572 to MT6572)

Ito ang pinakamadali sa lahat. Dito, kahit di na kailangang gumamit pa ng Android Kitchen or Bootimg Unpack/Repack Tools. 7zip, Notepad++, Stock Rom/CWM Backup and Porting Rom will do. Pwede nyo gawin ito gawin kahit sa Mobile Phones nyo. Root Explorer, CWM Backup, Porting Rom and 920Text Editor lang kakailanganin nyo.

PC MODE

1. Gawa muna kayo working area nyo o working folder nyo. (Ex: WORKING_XXXX), Sa loob ng folder nayan ay gumawa pa kayo ng dalawang folder and name it STOCK and PORT.
2. Copy and Paste nyo yung Stock boot.img nyo sa STOCK folder. Yung boot.img ay pwede nyo makuha sa CWM Backup.
3. Copy these folders/files from your phone to STOCK folder:

*system/vendor

*system/usr/keylayout
system/usr/keychars

*system/lib/modules
system/lib/hw
system/lib/drm
system/lib/soundfx
system/lib/libncurses.so

*system/etc/firmware
system/etc/vold.fstab
system/etc/vold.fstab.nand
system/etc/bluetooth
system/etc/permissions
system/etc/security
system/etc/wifi


4. Ang laman dapat ng Stock folder nyo ay yung boot.img at system folder, kung wala pa kayong system folder ay gumawa kayo at dun nyo ilagay lahat ng files na kinuha nyo sa phone nyo. NOTE: kung saang folder nyo kinuha yung mga files ay dapat gumawa rin kayo ng folder sa STOCK folder.
5. Copy and Paste nyo yung Porting Rom o yung Custom Rom na nakuha nyo sa PORT folder. NOTE: dapat naka zip ito.
6. Open nyo yung Custom Rom gamit ang 7zip. NOTE: Open lang, don’t Extract.
7. Goto to system folder and find these folder and DELETE:
system/etc/firmware
8. Now, i-drag mo ngayon yung firmware folder na kinuha mo sa Phone mo (How to drag: Just CLICK and HOLD gamit ang mouse at itapat lang sa 7zip kung saan nakaopen anf Custom Rom)
9. Gawin ang Step 8 sa mga natitirang files/folder. NOTE: kahit di nyo i-delete yung file sa Custom Rom.
10. Goto system folder again (Still in 7zip), drag out nyo yung build.prop sa kahit anong folder.
11. Open nyo yung build.prop gamit ang Notepad++, pwede nyo iedit to:


ro.build.id=
ro.build.display.id=
ro.custom.build.version=
ro.build.version.release=This is Andriod version That Displays in Settings
ro.product.model=
ro.product.brand=
ro.product.name=
ro.product.device=
ro.product.manufacturer=
ro.build.bluetooth.name=
12. Save mo ngayon yung build.prop kung may binago ka man, at i-drag mo ito pabalik sa 7zip (Custom Rom) para mapalitan.
13. Pwede mo na ngayon icopy ito sa SDCard at I-Flash.


PORTING For Different SoCs ( Ex: MT6582 to MT6572)

To be update soon ..
Or just follow this link ..

http://forum.xda-developers.com/showthread.php?t=2707438
or
http://forum.xda-developers.com/showthread.php?t=2701283

Kung may part kayo na di maintindihan sa mga tutorial nila pwede kayo magtanong sakin para matulungan ko kayo



FIXING BUGS:

FM NOT WORKING:


COPY THESE FILES FROM STOCK TO PORT:-
\system\lib\libaudio.a2dp.default.so
\system\lib\libaudio.primary.default.so
\system\lib\libaudiocompensationfilter.so
\system\lib\libaudiocustparam.so
\system\lib\libaudioeffect_jni.so
\system\lib\libaudioflinger.so
\system\lib\libaudiosetting.so
\system\lib\libfmar1000.so
\system\lib\libfmcust.so
\system\lib\libfmjni.so
\system\lib\libfmmt6616.so
\system\lib\libfmmt6620.so
\system\lib\libfmmt6626.so
\system\lib\libfmmt6628.so

OR try this
system/etc/firmware/mt6620_patch_e3_hdr.bin
system/etc/firmware/mt6620_patch_e6_hdr.bin-> If yours is MT6628, you'll need to patch all mt6628_fm_*_*.bin too
system/etc/firmware/WMT.CFG-> This is the antenna cfg, without this, FMradio cannot receive clearly

system/lib/modules/mtk_fm_drv.ko
system/lib/libfmcust.so



For WiFi Bluethooth:


system/lib/modules/mtk_wmt_wifi.ko -> After patching, both works & can be individually switch on/ off

system/lib/libbluetooth_mtk.so
system/lib/libbluetoothem_mtk.so -> MTK Engineering will show MT6628 if not patch...

system/etc/firmware -> if yours is MT6628, you'll need to patch all WIFI_RAM_CODE_* too



For GPS:


->>>> system/xbin/libmnlp
or, If you porting From MT6628 to MT6620, some apps at system/vendor/operator/ is blocking GPS so just delete all apps & use MTK Engineering mode to confirmed it...

Edit in build.prop
fmradio.driver.chip=1 -> if yours is MT6628 then change it to 3
mediatek.wlan.chip=MT6620 -> if yours is MT6628 then change last digit to 8
mediatek.wlan.module.postfix=_mt6620 -> if yours is MT6628 then change last digit to 8



For Camera:


copy these from stock to port
system\lib\hw\camera.default.so --- (if you have two files like camera.goldfish.so delete this the one with the goldfish)
\system\lib\libcamera_client.so
\system\lib\libcameracustom.so
\system\lib\libcameraprofile.so
\system\lib\libcameraservice.so

or
copy from system/lib of stock to port.
- libmhal.so
- libmhalcontent.so
- libmhaldrv.so
- libmhalmdp.so
- libmhalpipe.so
- libmhalscenario.so
- libmhalutility.so

or

Put libcamdrv.so of rom only or campare the file of size of your porting rom file and the base rom then whose size is same leave it and whose size is greater in ur stock rom jst add and replace that file only.

or

lib3a.so
liba3m.so
libacdk.so
libaudioflinger.so
libc.so
libcam.camadapter.so
libcam.campipe.so
libcam.camshot.so
libcam.client.so
libcam.paramsmgr.so
libcam.utils.so
libcam_camera_exif.so
libcamalgo.so
libcamdrv.so
libcamera_client.so
libcamera_jni_eglfence.so
libcamera_metadata.so
libcameracustom.so
libcameraservice.so
libgn_camera_feature.so
libexif
libfeatureio.so
libfrsdk.so
libft.so
libgcomm_jni.so
libgoggles_clientvision.so
libgui.so
libimageio.so
libja3m.so
libjni_mosaic.so


(Skip if any missing)

or

Replace camera.apk in sysyem/app

And do a ctrl+f search in system/lib for anything called 'camera', 'camrecorder', or just 'cam' and replace those.



Audio Problem Fix:


copy paste sytem/lib/all audio lib file from stock to port.(search by ctrl+f)




FOR SPREADTRUM DEVICES



How to port Roms and make it Universal

1. Make Sure na yung Custom Rom/Rom na kinuha nyo ay same ng chipset sa phone nyo. (Ex: SC6820 to SC6820)
2. Create your Working folder. Then extract mo dun yung Custom Rom/Rom na nakuha mo.
3. Ngayon kunin mo ang mga files na ito sa Custom Rom/Rom:

/app (whole folder)
/framework (whole folder)
/media (whole folder)
/etc/permissions/ (whole folder except hardware_handheld & platform)
/fonts (whole)
libandroid_runtime.so , libwebcore.so (from /system/lib/)
/oem (whole folder if exists,most of the roms does not contain oem)
build.prop

4. Gumawa ka ngayon ng bagong folder name it MYROM o kahit anong gusto mo, sa loob ng MYROM ay gumawa ka ulit ng folder and name it system, sa loob ng system folder ay gumawa ka ulit ng dalawang folder, name it ‘lib’ and ‘etc’.
5. Paste mo ngayon jan lahat ng files na kinuha mo sa Custom Rom, make sure na tama ang pagkakalagay ng files sa kanikanilang folders.
6. Balik ka ngayon sa Custom Rom folder yung extracted, at i-copy mo yung Meta-inf folder at i-paste mo sa loob ng MYROM na folder.
7. Ang laman lag dapat ng MYROM na folder ay yung ‘system’ na folder at Meta-inf folder.
8. Now open updater script from Meta-inf\com\google\android\ & open it with notpad++, and make it blank, just select all and delete.
9. Copy these to updater scipt:
ui_print("****************************************");
ui_print("* >>>>>>>>>universal rom<<<<<<<<<< *");
ui_print("****************************************");

show_progress(1.000000, 0);
ui_print("mounting filesystems...");
run_program("/sbin/busybox", "mount", "/system");
set_progress(0.100000);

ui_print("deleting files...");
delete_recursive("/system/framework");
delete_recursive("/system/app");
delete_recursive("/system/media");
delete_recursive("/system/fonts");
ui_print("extracting files...");
package_extract_dir("system", "/system");
set_progress(0.300000);

ui_print("setting permissions...");
set_perm(0, 0, 0644, "/system/lib/libandroid_runtime.so");
set_perm(0, 0, 0644, "/system/lib/libwebcore.so");
set_progress(0.400000);
set_progress(0.500000);
set_progress(0.700000);

# unmounting filesystems...
Run_program("/sbin/busybox", "umount", "/system");
set_progress(0.900000);

set_progress(1.000000);
ui_print("****************************************");
ui_print("* install complete! *");
ui_print("* reboot your device *");
ui_print("****************************************");

10. Save mo na ngayon ang updater script, then i-zip mo na ngayon ang MYROM na folder. Copy to SDCARD then FLASH.




Fixing known Issues/Bugs


boot
libandroid_runtime.so ( if rom did not boot with port lib)
libandroid_servers.so

wifi
libhardware_legacy.so - it contains the driver path of wifi
from modules 8723as.ko or unifi_sdio.ko or may be other - these are the drivers to load wifi
if u are confused what is ur wifi driver then do these steps
>open libhardware_legacy.so in notepad++ & search for /system/lib/modules/ the name(*****.ko) u will find after that is ur wifi driver
libeng_wifi_ptest.so :- important to work wifi properly
from binaries(/system/bin) copy these
wpa_supplicant - for this u can scan networks
synergy_wifi_attach - important
synergy_service
netd
eng_setbtwifiaddr
engmodemclient
engservice
engtest
from /etc/
dhcpcd- for this u will be able to find networks
wifi - important
firmware - most important

bluetooth
libhardware_legacy.so
libbluedroid.so
libbluetoothd.so
libbluetooth.so
from binaries
bluetoothd
synergy_service
netd
eng_setbtwifiaddr
engmodemclient
engservice
engtest
from /system/etc/
bluetooth
firmware

headset
headset.ko from /system/lib/modules

rotation
libsensorservice.so
sensors.sprdbp.so (from /system/lib/hw)
android.hardware.sensor.proximity.xml (from /etc/permissions)

gpu
egl folder (from /system/lib)
mali.ko (from modules)
gralloc.mali.so (from hw)

hardkeys/softkeys
usr folder (from /system)

touch
sps folder (from /system)


for more info just follow this link ..
http://forum.xda-developers.com/android/software/ultimate-guide-spreatrum-t2998862

Kung may part kayo na di maintindihan sa mga tutorial nila pwede kayo magtanong sakin para matulungan ko kayo




CREDITS TO XDA-Developers for the GUIDES and TUTORIALS




Notes :
- All Softwares And Tutorials Are Made By Various Aurhors From XDA Developers Forum And Internet,So All Credits Are Going To Them.
- All Aplications Are Tested By Me And Working
- I'm Not Responsible For Any Eventual Errors And Misbehaving Of Yours Devices.


Refer na lang po kayo Dito http://en.miui.com/thread-5592-1-1.html
Anjan na lahat ng TOOLS na maaari nyong Magamit sa Pag-CUSTOM



HOPE NA MAKATULONG ITONG THREAD SA IBA, AND HOPING NA MAKAGAWA TAYO NG SARILI NATING CUSTOMS ROMS PARA NAMAN MAKASABAY PHONE NATIN SA USO hihi

HOPING FOR YOUR COOPERATIONS



(Credits to GSM and XDA for Tutorials)

Patulong po sa AURA VIBE ko nagstuck sa booting screen at hindi ko rin po magawa yung hard reset ngrerestart lang po tapos stuck po ulit..Salamat po!!

 

[hydroid18]

ts, pano po iroot ang skk aura edge 5.1 lollipop hirap iroot eh...

 

[watamouri]

maraming thank you boss!

 

[hunkslams]

Sir meron pa ba kayo skk chorno ace plus na firmware ???
please sir na dead na phone ko