- Messages
- 162
- Reaction score
- 0
- Points
- 26
What you need is
1. Common Sense
2. Patience
Disclaimer : Im not responsible for any misfortune that may happen, do this on your own risk
but following very carefully will result to success.
Sa mga mag tatanong if my custom rom ba ito: the answer is ewan. kayo na mg hanap ng custom rom. stockrom lng meron dito.
nag ka sexy virus at malware attack ang up vision ng friend ko kaya ako ng research nito.. sana maka tulong.
successful ang firmware upgrade ko by following this.
Install Driver First:
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:
Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
refer to this video
StockRoms Choose 1 only. download rom 1 if walang DTV ang SM up vision mo. Rom 2 naman if my DTV and UP vision mo
ROM 1 - Starmobile UP Vision
ROM 2 - Starmobile UP Vision DTV
and download:
SP flash tool
NOTE: register muna sa forum nila to download yung needed files
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6582_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery and return it after some 10 seconds (and don't turn on the phone).
- Change " Download only to Upgrade Firmware
- Download button
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
medyu matagal mg boot mga 10-15 mins but dont worry ok yan..
credits to SoCr@Te at sa ibang source nito
bago mg tanong basa muna..
press hit thanks!!! if naka tulong
i will try to reply if you have questions
1. Common Sense
2. Patience
Disclaimer : Im not responsible for any misfortune that may happen, do this on your own risk
but following very carefully will result to success.
Sa mga mag tatanong if my custom rom ba ito: the answer is ewan. kayo na mg hanap ng custom rom. stockrom lng meron dito.
nag ka sexy virus at malware attack ang up vision ng friend ko kaya ako ng research nito.. sana maka tulong.
successful ang firmware upgrade ko by following this.
Install Driver First:
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer.
Follow these steps:
Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
refer to this video
StockRoms Choose 1 only. download rom 1 if walang DTV ang SM up vision mo. Rom 2 naman if my DTV and UP vision mo
ROM 1 - Starmobile UP Vision
ROM 2 - Starmobile UP Vision DTV
and download:
SP flash tool
NOTE: register muna sa forum nila to download yung needed files
Install ROM :
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6582_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery and return it after some 10 seconds (and don't turn on the phone).
- Change " Download only to Upgrade Firmware
- Download button
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
medyu matagal mg boot mga 10-15 mins but dont worry ok yan..
credits to SoCr@Te at sa ibang source nito
bago mg tanong basa muna..
press hit thanks!!! if naka tulong
i will try to reply if you have questions
Last edited: