Torque Droidz Easy Stock ROM / Firmware to unbrick your phone

[kingerott12]

​

View attachment 194648

the stock rom/firmware of Torque Droidz Easy. This phone has an MTK Chipset. You can download the tools that is needed to unbrick your phone below.

View attachment 194588

Firmware Here --> Torque Droidz Easy
VCOM Driver -->AutoInstaller
SPFlashTool -->SPFlashTool

"Extract the files to your desired folder"


Note: If PDANet does not work you can try this driver. You can manually install it in Device Manager. Download it here -- >Manual Install Driver

Installing Driver

First try the Alternative Driver, which is the AutoInstaller. Just open the install.bat then it will automatically install the driver. Then proceed to flashing. If it did not work then proceed with VCOM driver that you had downloaded. Then install it manually follow the guide below.

When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.

View attachment 194620

1. This is the first time that you will connect your phone and it will search for the correct driver. You can connect your phone without battery in it.

View attachment 194636

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

View attachment 194637

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

Reference Video Installing the Driver (watch it in HD)

Reference Video Flashing your phone (watch it in HD)

Flashing
1. Launch FlashTool
2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool

View attachment 194640

View attachment 194641

3. After you load the file, press F9 or Press Download to Flash your Phone.
4. If Download is not possible, you can press Firmware Upgrade.
5. After you press Download or Firmware Upgrade re-insert your battery and connect your Phone to the PC. Press Volume Down or Volume Up while connecting to PC.


"Hard reset your phone after flashing"

I hope this tutorial help you. Please drop a comment if something is not clear to you. If you have time, please confirm if the firmware is working. arigatou gozaimasu .

View attachment 194648​

 

[demonic666]

TS ang firmware na ito ay hindi tested logo hang after flash wala siyang cache...

 

[kingerott12]

TS ang firmware na ito ay hindi tested logo hang after flash wala siyang cache...

sir no need cache try ko pong i backup ung torque droidz easy tapos bigay ko po sayo

 

[iJohn]

iupdate mo ito, isama mo narin yong post ko na Kitkat version tapos yong NVRAM ilagay mo narin...

 

[kakai01]

pa help naman po sa torque droids trend na delete ko Google play d n mkpag DL at mkpag stream ng video

 

[jho0126]

ts, pwede po ba ito don sa torque droidz na tablet?

thanks/

 

[iJohn]

Nadadownload naman po ang google play. search niyo lang po sa google madami narin yan nagkalat...

 

[Grevenz101]

".'pa BM mUna pO"., tHanks"

 

[lead.sei_24]

Pa bm muna ts baka may magpaayos