[TUT] Smart MF100 /w 16digit code Unlock/Repair autorun

[Alphrx18]

ts .. . . wala bang ss para proven that it is working .....

 

[oami]

ts .. . . wala bang ss para proven that it is working .....

eto ss dude

 

[khayzer]

bro. patignan mga error namen oh.

 

[ypjomz]

bro. patignan mga error namen oh.

pasenxa po ngaun lng ako naka OL.. tama po ung sa picture #1 at hindi cgro ma detect ng firmware updater ang dongle mo kasi ginagamit pa siguro ni QPST yun hindi madetect ng firmware updater ung dongle mo.. kelangan bago ka nag update close mo lahat ng naka run na program na gumagamit sa dongle mo para ma update ni firware updater..

 

[ypjomz]

pwd nga pala sa mf190.. pero magiging mf100 nmn ang modem mo kahit firmware pa ng mf190 ggamitin mo kasi ung tool update pang mf100 yta.. ang speed ng modem q naging 3.6MBps. na imbes 7.2MBps. kasi nga mf100 na xa. tsk..

pasenxa po pang MF100 po kasi to.. try mo e update ang MF190 mo sa firmware ng MF190 mismo.. kasi ginawa kong thread na to para lang sa MF100.. sinira ko kasi talaga ung MF100 ko para maexpermentohan kong ma openline, yun nagawa ko.. kayo mag experment din kayo kung baka me ma diskobre kayo.. wa lang sana ma sira... hehehe.. masta ako openline na yung MF100 ko ni share ko lang ung ginawa ko sa MF100 ko...

 

[ypjomz]

salamat po sa mga tumulong habang wala ako.. estudyante pa po kasi.. hehehe.. pang 2 course ko na..

 

[regnerz]

pasenxa po pang MF100 po kasi to.. try mo e update ang MF190 mo sa firmware ng MF190 mismo.. kasi ginawa kong thread na to para lang sa MF100.. sinira ko kasi talaga ung MF100 ko para maexpermentohan kong ma openline, yun nagawa ko.. kayo mag experment din kayo kung baka me ma diskobre kayo.. wa lang sana ma sira... hehehe.. masta ako openline na yung MF100 ko ni share ko lang ung ginawa ko sa MF100 ko...

hahaha.. ok lng nmn to.. pwd q pa nmn ibalik sa mf190 toh. hehehe..ok lng kahit masira haha.. joke..

 

[bullshacks]

ts pwede rin kaya ito sa huawei e1552? dead na kc d rin na dedetect ng pc. thanks sa share.

 

[choy000]

boss pwede pa kaya itong mf100 ko ayaw na nya kasi umilaw hindi narin madetect ng pc, dati kasi inupdate ko firmware nito then nagfailded ayun ayaw na nya mabuhay.

 

[ypjomz]

ts pwede rin kaya ito sa huawei e1552? dead na kc d rin na dedetect ng pc. thanks sa share.

parang hindi ata kasi ung huawei kasi parang hindi mo makita ung mga files ng firmware nya sa QPST... pero try mo lang po kung pede.. hehehe.. dead naman kasi yan so pagtripan mo na...

 

[zaoren4]

try q.. update later anyway for sharing..

 

[choy000]

ayaw na madetect ung port ng usb dongle (ZTEMF100) ala ako makita sa QPST com1 com2 lang andun'

 

[oami]

ayaw na madetect ung port ng usb dongle (ZTEMF100) ala ako makita sa QPST com1 com2 lang andun'

check mo sa device manager.kung wlang nadetect na usb dun, d na marerevive yang smartbro mo.

 

[choy000]

check mo sa device manager.kung wlang nadetect na usb dun, d na marerevive yang smartbro mo.

thanks sa replay mukang ipapalibing ko na tong MF100 ko hindi narin madetect sa device manager eh

 

[eyetech]

Pwede po ba yan sa mf627

 

[oami]

Pwede po ba yan sa mf627

may ibang TUT dyan pra sa mf627

 

[mikelss21]

Una sa lahat ADMIN paki delete nlng if repost..
Ni search ko po hanggang ika 20pahina dito sa Symb ng MF100 at ilang araw na akong gusto maunlock ung smartbro dogle ko per wala pa akong nakita tut na mka pag unlock ng MF100 /w 16digit code maliban nlng siguro pag may DC-unlocker ka na me credits o me crack na pinakabago. Pasenxa na po kasi napakatamad ko mag lagay ng screenshot.

ok simulan na..

Download:
1.QPST
2.MF100 Firmware
3.DCCRAP
4.ZTE Driver
5.GlobeVisibility

Instructions:
1. extract all zip or rar files.
2.a. install QPST.exe.
2.b. install ZTEDrvSetup.exe. - skip if dongle not bricked/dead.
3. run "QPST Configuration">click "Add New Ports">uncheck "Show Serial and USB/QC Diagnostic ports only"> add all ports "COMX -USB/unknown" - X is a number.
4. click the added port and goto "Start Clients">EFS EXPLORER> then ok ok.
5. delete all files except folders in the EFS EXPLORER.
6. drag the files inside this folder. "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\ETS_EG_P671A1V1.0.0B06\3.Download_File\" and wait until finished. - from the files you extracted
7. run MF100UpdateToolV1.9.exe from "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\". - from the files you extracted
8. in MF100UpdateToolV1.9.exe check "Special Item" and click "Software Version" look for "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\ETS_EG_P671A1V1.0.0B06\3.Download_File\" from the files you extracted.
9. click the "purple arrow" pointing to the right and wait until finished.[theres a time that it will search for the file ".sdi" just click close/cancel]
10. run DCCRAP, Select manufacturer "ZTE datacards",click "Detect Card" or the big magnifying glass, goto Flash and click "Write Dashboard" and use the GlobeVisibility.ISO you downloaded earlier - wait until finish.
11. enjoy your unlock SmartBro dongle.
12. go outside and buy halo-halo.

In any steps if you have trouble try close the finish program you use or reset/unplug and plug dongle.
Use any of this program or TUT at your own risk.
If you can't understand the TUT so sorry for you.
Tested in my Dead/no Autorun 16digit code MF100

credit to TIMMY for the theory, kiLLi-kiLLerZ for the DCCRAP flash writing and ExcL for the tut of changing the dashboard and all of Symb family. <just click thier names for the reference>

sir mf180 po ung broadband ko zte smartbro .pwede po ba ito

 

[ypjomz]

sir mf180 po ung broadband ko zte smartbro .pwede po ba ito

sorry pre pero pang MF100 lang yan.. try mo lng at your own risk po..

 

[lycans0920]

salamat d2 ts may dead rin akong mf100 kaso globe...try ko rin e2

 

[Akatsukiejez]

ts wala ka bang screen shots? para mas makasunod at magawa ng maaus pls. thanks..