[TUT] Smart MF100 /w 16digit code Unlock/Repair autorun

[cyrubz]

salamat ts ok na po sakin unlock na po

 

[Anonymouse10]

d ko nagawa.di ko pa nabackup ung mga files pra sa driver detect.pero na fix ko na na downgrade nga lang at nawala driver detection

 

[symbiose]

salamat ts, working sa SmartBro ZTE MF100...kaso nawala ang CD-ROM

 

[romymjrose06]

bat kaya pagreach ng about 20mb, bumabalik sa 0% yung download ko? Di ko matapos tapos pagdownload ng firmware...

 

[leby]

thank you sir its working

 

[prince hayden]

error na po yung link ng dccrap. ap up naman po. thanks po dito try ko po.

 

[prince hayden]

up ko lang po...boss pano pag dead at di na madetect ng port. red blink lang po. TIA

 

[yumibosxara]

Download:
1.QPST
2.MF100 Firmware
3.DCCRAP
4.ZTE Driver
5.GlobeVisibility

Instructions:
1. extract all zip or rar files.
2.a. install QPST.exe.
2.b. install ZTEDrvSetup.exe. - skip if dongle not bricked/dead.
3. run "QPST Configuration">click "Add New Ports">uncheck "Show Serial and USB/QC Diagnostic ports only"> add all ports "COMX -USB/unknown" - X is a number.
4. click the added port and goto "Start Clients">EFS EXPLORER> then ok ok.
5. delete all files except folders in the EFS EXPLORER.
6. drag the files inside this folder. "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\ETS_EG_P671A1V1.0.0B06\3.Download_File\" and wait until finished. - from the files you extracted
7. run MF100UpdateToolV1.9.exe from "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\". - from the files you extracted
8. in MF100UpdateToolV1.9.exe check "Special Item" and click "Software Version" look for "\DL_MF100_ETS_EG_EUV1.00.00\DL_MF100_ETS_EG_EUV1\ETS_EG_P671A1V1.0.0B06\3.Download_File\" from the files you extracted.
9. click the "purple arrow" pointing to the right and wait until finished.[theres a time that it will search for the file ".sdi" just click close/cancel]
10. run DCCRAP, Select manufacturer "ZTE datacards",click "Detect Card" or the big magnifying glass, goto Flash and click "Write Dashboard" and use the GlobeVisibility.ISO you downloaded earlier - wait until finish.
11. enjoy your unlock SmartBro dongle.
12. go outside and buy halo-halo.

In any steps if you have trouble try close the finish program you use or reset/unplug and plug dongle.
Use any of this program or TUT at your own risk.
If you can't understand the TUT so sorry for you.
Tested in my Dead/no Autorun 16digit code MF100

credit to TIMMY for the theory, kiLLi-kiLLerZ for the DCCRAP flash writing and ExcL for the tut of changing the dashboard and all of Symb family. <just click thier names for the reference>

===================================================
Requested:

Anyone who need the pictures just do it step by step.. warning: use at your own risk!
in every step close the program that has been used except what your see in the picture..
If the color is RED it must be it.
If the color is YELLOW it can be any number or letter etc.

kasi hindi na dead yung MF100 ko iba po ung iba na makikita nyo sa picture..

1.
http://www.symbianize.com/attachment.php?attachmentid=531702&stc=1&d=1334071600http://
2.
http://www.symbianize.com/attachment.php?attachmentid=531703&stc=1&d=1334071600
3.
http://www.symbianize.com/attachment.php?attachmentid=531704&stc=1&d=1334071600
4.
http://www.symbianize.com/attachment.php?attachmentid=531705&stc=1&d=1334071600
5.
http://www.symbianize.com/attachment.php?attachmentid=531706&stc=1&d=1334071600
6.
http://www.symbianize.com/attachment.php?attachmentid=531707&stc=1&d=1334071654
7.
http://www.symbianize.com/attachment.php?attachmentid=531714&stc=1&d=1334072814
8.
http://www.symbianize.com/attachment.php?attachmentid=531709&stc=1&d=1334071654

pag hindi nyo pa makuha, sorry na po talaga. ganito nlng gawin nyo -->

maraming salamat ts ngaun quh lng nagawa newbe lng kxi aquh eh hehe mwah mwah

 

[larry07]

ts not working sa sun na sim?

 

[onatnat]

Deadball na modem ko Dina nadetech ng pc

 

[clubkids]

bm muna

 

[GameZero]

ito yung ginamit ko para maunlock mf100 . Working ito pero ts may tanong ako bkit nging version ng mf180 yung mf100 ko ? Di ko tuloy ma.update yung firmware ng mf100 ..

 

[lecksmatt]

Although this is kinda old, magpapasalamat parin po ako ng sobra TS dahil na openline ko ung ZTE MF100 ko hehe, sinunod ko ung procedures pero tulad nga ng sabi mo e nagkaron ng mga errors. Nung natapos ko na ung buong process, hindi parin sya unlocked then nung inulit ko ung process from start until the end, ayun ok na ok na and finally it's unlocked. Hindi ko nlng po ifinlash ung Globe Visibility kasi kahit maganda ung UI nya, mas ok paring tingnan ung default ng smartbro hehe. Thank you po ulet sa guide na to! +1

 

[toperry24]

error na po ung dc crap nabura na sa mediafire pare upload po ng file TS

 

[InToY13]

Salamat talaga ts ha ang tagal ko na ito hinahanap.
unlock na po MF100 ko

 

[dreadmastah]

pa update ng mga links pls...

 

[gako]

Mga bossing pahelp naman. Hindi ko kase nagawa ang step 7. May nagpop-up lang tapos ayon hindi na gumana yung dongle ko. Patulong naman. Salamat.

 

[paopao54]

View attachment 148457
ito yung problem ng sakin

 

[beetoy]

thank you sir its working

after ko na po na unlock, what can i do next with the dongle?

 

[sekaraininku]

ts, after i click yung purple arrow, may message na nag po pop up na di ko ma intindihan ang language. any idea?

- - - Updated - - -

yun ok na! salamat!