[ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84 [DXMA1 NEW FIRMWARE]

[jpagz21]

Hello Guys .. Ginawa ko ang THREAD na to para sa mga Newbie na nahihirapan mag Flash ng Firmware ng Samsung Galaxy Y gamit ang ODIN .. Mas madali ito Sundan kasi my mga Screenies din na nakalagay dito .. Sana ma gustuhan nyu Have a nice day .. Happy Flashing!

MUST READ : KUNG ANO LANG UNG LAMAN NG FILES OF FIRMWARE UN LANG ANG GAGAMITIN. NGAUN KUNG WALANG PIT OR BOOTLOADER IT MEANS DI MO NEED UN OK?

How to Flash Samsung Galaxy Y via Odin

WARNING : Before Flashing Make sure na 100% or 50% ang Battery ng SGY mo .. para maiwasan masira ang SGY .. ​

Step 1 : Idownload nyu muna ang mga FILES na nasa Download Link at Attachment natin .. Ang Nasa Mediafire Link ay un ang firmware na gagamitin natin para makapag Flash tayo gamit ang Odin at ang nasa Attachment naman ay ang ODIN3 v1.84 .. Try and Tested ko na yan

*Firmware Download Link :

DXMA1 : http://www.mediafire.com/?keo5rf6po5n6wei (Latest Firmware)

Other Firmware : http://www.mediafire.com/?2ssnc6lz28lhk


*Odin3 v1.84 Download Link : On Attachment

Step 2 : Extract nyu sa Desktop nyu un mga files na Dnownload nyu .. after nyu ma extract un Firmware at Odin na download nyu .. eto ang makikita nyu

Note : DDLA1 Firmware po ang nakikita natin sa Screenies kea maraming Files ang ilalalagay .. Pero hindi ibig sbhin nun lahat ng Firmware ay katulad ng DDLA1 .. My mga Firmware na 3 Files lang ang laman at un lang ibrobrowse or gagamitin nyu .. Isa pa .. Di purkit mag iba ang file extension ng isang firmware hindi na ito gagana .. kung ano lang ang laman or kung anong meron sa isang firmware na idodownload nyu un lang un .. wala kinalaman ang file Extension dito .. basta ang ilalagay nyu lang un nasa laman ng dinownload nyu ..

*Firmware :

[url]http://img51.imageporter.com/i/00942/crr5t9r007g1_t.jpg[/URL]

*Odin3 v1.84 :

[url]http://img51.imageporter.com/i/00942/zdy5yl127k2f_t.jpg[/URL]

Step 3 : Open nyu un Odin3 v1.84 na Dinownload nyu .. If naka windows 7 or Vista ka RUN IT AS ADMINISTRATOR para sure .. Then my makikita kau jan na PIT at FILES DOWNLOAD. Jan muna tau mag Focus dahil ang Dnownload natin na FIRMWARE jan natin ilalagy .. Click nyu un Button ng PIT then Browse nyu un folder na inextract nyu and Click nyu un file na totoro_0623.pit. Ayan nakapag lagay kana sa PIT .. Same lang din gagawin nyu sa FILES DOWNLOAD. Click Browse Lang .. Sundan nyu un nakalagay sa Screenies ko

[url]http://img51.imageporter.com/i/00942/i3xwikc66wmq_t.jpg[/URL]

PIT : totoro_0623.pit
BOOTLOADER : BOOT_S5360DDLA1_REV05.tar.md5
PDA : PDA_S5360DDLA1_REV05.tar.md5
PHONE : MODEM_S5360DDLA1_REV05.tar.md5
CSC : GT-S5360-MULTI-CSC-ODDLA1.tar.md5

Note : About RE-PARTITION .. Pwede nyu Check or Uncheck .. Uncheck if gusto normal Flashing lang .. Then Check if you want Flash repair your Brick SGY .. So far pag mag Flash ako pag my Totoro Pit Check ko parin un RE-PARTITION .. Same way Para sure But its up to you

Step 4 : Ayan naka-Ready na ang Odin3 v1.84 natin .. Ngaun Turn Off nyu na ang SGY nyu .. Make sure na walang SIM at SD Card para Maiwasan natin ang pag bura ng Important files or Make sure You Have a Back up your Contacts and Other Files and Make sure din na naka-INSTALL na ang Driver ng SGY mo sa pc mo or my Naka-Install nang Samsung KIES na application .. If Wala pa punta kau dito Samsung.com/Kies Pag naka turn off na .. Then Press POWER BUTTON + VOLUME DOWN + HOME BUTTON Saby Saby yan huh .. After that my mag aappear sa Screen ng SGY nyu at eto un nasa Screenies natin

[url]http://img51.imageporter.com/i/00942/7pml1j2fw2np_t.jpg[/URL]

Sorry kung hindi malinaw pag kaka PICTURE ko sa SGY ko Anyway after that diba yan na un lalabas .. then my mababasa kau jan na warning .. then meron jan Option na pag pipilian mo .. If VOLUME UP to CONTINUE or VOLUME DOWN to CANCEL OPERATION .. If gusto nyu ituloy Press nyu un VOLUME UP .. Then Lalabas ang Download mode Screen nyu .. Check my Screenies ulit

[url]http://img51.imageporter.com/i/00942/5330ikq678m5_t.jpg[/URL]

Ayan nasa DOWNLOAD MODE kana ..

Step 5 : Ngaun Iconnect na natin ang SGY natin na naka-DOWNLOAD MODE sa PC natin na kung saan i-senet up natin ang Odin3 v1.84. Dapat my Colour Yellow ka makita sa ID:COM at my nakalagy sa Message Box na Added!! Word .. It Means nakaConnect na xa via Odin .. Like this

[url]http://img51.imageporter.com/i/00942/6zmtlgbvsxrw_t.jpg[/URL]

Step 6 : Ayan Connected na .. Before Clicking Start Button .. Check nyu muna kung tama un pag kakalagay nyu ng mga FILES DOWNLOAD .. If wala na Problem GO! Click Start Button and Wait Until it Finish! Success !! ito ang Screenies pag Ok ang pag Flash nyu via Odin

[url]http://img51.imageporter.com/i/00942/q2e01y9sq47b_t.jpg[/URL]

Note : After nyu makitang nag Success ang Flashing nyu wag nyu muna aalisin sa PC ang SGY nyu .. Wait nyu lang kasi mag Coconfigure na yan .. then mag rereboot ulit yan .. Wait nyu until lumabas un Boot Screen nya. Then Pwede nyu na alisin

After maging Success ang pag Flash natin Do a Hard Reset itype nyu to *2767*3855# ang Purpose nyan para fresh na Fresh ang SGY natin .. After that mag rereboot ang SGY natin Wait Until it Finish again

*TIPS and TRICKS :

@bumslayer : Pwede rin iflash yung pda at csc lang thru odin in which case hindi na kailangan ung .pit file. Wag din lagyan ng tsek ung repartition in this case.

GOOD LUCK AND HAPPY FLASHING !! DO IT AT YOUR OWN RISK!!

​

thnx

 

[elvinabella]

thanks po ulit TS.

 

[Xcaliber8]

Re: [ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84

http://download1607.mediafire.com/lr6r04c1c4mg/keo5rf6po5n6wei/DXMA1.rar

Thnx d2 TS

 

[jeffreyjam]

Re: [ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84

<ID:1/004> Can't open the serial(COM) port.
mga boss anu solution ng odin ko? eto error laging fail po sinunod ko naman laat ng nasa tut PLEASE PO WAG IGNORE :'( PLEASEEEEE Salamat po

 

[iminlovewithGod917]

Re: [ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84

ano po ba pagkakaiba ng mga firmwares?? pag nasa Pilipinas ka, Philippines frimware po ba ang REQUIRED na iinstall?? or pwedeng kahit anong frimware?

 

[sandugo85]

Re: [ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84

working pdin b 2?

 

[IsherwinI]

thank you ts.. bait mo!

 

[forforfor]

hindi po nagana skn sir. failed po nkalagay skin .

 

[leng777]

Wag mo tanggalin. Hayaan mo hindi madetect tapos punta ka control panel at iuninstall mo yung kies at usb driver. Pag wala na, tanggalin mo si sgy.
Patayin mo then enter Download/Odin mode ulit. Wag muna iconnect.
Install usb driver again then connect your SGY.

Sir excuse lang po ginawa ko na xa pero ayaw parin madetect may iba pa bang way? pag nasa odin mode na sya hindi madetect ng odin ung cp ko.. pero nadedetect xa pag nasa cwm based recovery ako.. what do you think po kaya sir?

 

[gailquiambao]

Thanks dito. Sobrang helpful boss. More power!

 

[rickytech]

Re: [ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84

Thanks for sharing bro!!!

 

[TAGZ]

Re: [ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84

Slamat po dito ts

 

[rone141]

Re: [ TUTORIAL ] : How to Flash Samsung Galaxy Y via Odin3 v1.84

thank you po working po sakin yung DDLA1 my Galaxy y is working again thx alot..

 

[Pandy]

thanks to this thread

 

[darcrose]

-maraming salamat brader! naayus ko SGY ng anak ko...

 

[magno5012]

Thanks ok na ulit ung SGY ko nung una may error kasi naka-check ung re-partition ko akala ko kasi na-brick bigla ung cp ko kasi hanggang sa boot screen lang tapos paulit-ulit lang kaya naisip kung i-flash. Ngayon pwede na ulit gamitin.

 

[zyphrus25]

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5360_Bootloader_XXKL3_DefaultCalDataWithBoot.tar.md5 is valid.
<OSM> PDA_S5360_DXLJ1.tar.md5 is valid.
<OSM> MODEM_S5360_DXLI1.tar.md5 is valid.
<OSM> CSC_S5360_OLBLG1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

bakit po lagi failed... naka ilang tries na po ako... iba't ibang pc... salamat sa tutulong...

 

[Arthur Leywin]

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5360_Bootloader_XXKL3_DefaultCalDataWithBoot.tar.md5 is valid.
<OSM> PDA_S5360_DXLJ1.tar.md5 is valid.
<OSM> MODEM_S5360_DXLI1.tar.md5 is valid.
<OSM> CSC_S5360_OLBLG1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> BcmBoot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

bakit po lagi failed... naka ilang tries na po ako... iba't ibang pc... salamat sa tutulong...

Wag ka na maglagay ng bootloader.

 

[zyphrus25]

Wag ka na maglagay ng bootloader.

kahit wala po... ganun pa rin...

update:

okay na po... tnx... ngDL ako ibang rom... tnx

 

[glenn003]

tnx, dito bro...