Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.
All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!
[root@m5v3e: /] apt-get install eclipse
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
eclipse: Depends: eclipse-jdt (>= 3.5.2-6squeeze2) but it is not going to be installed
eclipse-pde: Depends: eclipse-jdt (= 3.5.2-6squeeze2) but it is not going to be installed
Depends: eclipse-platform (= 3.5.2-6squeeze2) but it is not going to be installed
Depends: libasm3-java (>= 3.2-3) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
[root@m5v3e: /]
Ask ko lang about this, what do you think Stallman Appeals Free Software Users To Ban Ubuntu!?
Totoo kaya?
wala ako internet pwede ba magdownload at install offline?
Nag install ako ng 12.4 ubuntu kaso sir di ako maka play ng mp3 at play ng videos
In that case, lubusin na po ninyo ang expense sa Internet sa halip na i-download pa po separately ang mga files na kailangan ninyo.
na install ko na po
nawala ako gana sa windows haha
Yes, maraming bagong matututunan. Check Page 1 of this thread lang, kasi maraming items dun na nilagay namin para sa mga bagong users ng Linux, to easily get you started.na install ko na po
nawala ako gana sa windows haha
Release Date: 2012-07-17
Realtek Linux mac80211 based driver:
--This driver supports follwing RealTek PCIE Wireless LAN NICs:
RTL8188CE/RTL8192CE
RTL8191SE/RTL8192SE
RTL8192DE
--This driver supports follwing Linux OS:
Fedora Core
Ubuntu
Debian
Mandriva
Open SUSE
Gentoo
MeeGo
android 2.2 (froyo-x86), etc.
Tested in Ubuntu 12.4, Fedora 17 .etc
--This driver supports follwing kernel versions:
1) kernel version >=2.6.35
you can build & install drvier use II.
2) kernel version [2.6.24, 2.6.34]
you can build & install drvier use III.
========================================================================================
Check tools:
========================================================================================
*Before install driver, please check already install compile tool and kernel source code
1>Install compile tool
$yum install gcc-c++
2>check kernel source code exists /usr/src/kernels/ "kernel name"
Download your kernel source code
*http://www.kernel.org/pub/linux/kernel/
or
$yum install kernel-devel
========================================================================================
Build Instructions:
========================================================================================
1> tar -zxvf rtl8712_8188_8191_8192SU_usb_linux_xxxx.tar.gz
go to "./rtl8712_8188_8191_8192SU_usb_linux_xxxx" directory.
2> Change to Super User
** for Fedora
$su
** for Ubuntu
$sudo su
3> plug in USB dongle.
========================================================================================
I. Component
========================================================================================
The driver is composed of several parts:
1. Firmare to make nic work
1.1 firmare/rtlwifi
2. Module source code
2.1 ./*
2.2 rtl8192ce
2.2 rtl8192se
2.2 rtl8192de
3. Script to build the modules
3.1 Makefile
4. compat-wireless
4.1 compat-wireless*.tar.bz2
4.2 compat
========================================================================================
II. Compile & Installation & uninstall (kernel version >=2.6.35)
========================================================================================
You can enter top-level directory of driver and execute follwing command to
Compile, Installation, or uninstall the driver:
1. Change to Super User
sudo su
2. Compile driver from the source code
make
3. Install the driver to the kernel
make install
reboot
4. uninstall driver
make uninstall
========================================================================================
III. Compile & Installation & uninstall [2.6.24, 2.6.34]
========================================================================================
We don't support kernel 2.6.24-2.6.34 directly, Because there are
lots of issues in mac80211 from kernel 2.6.24-2.6.34,
So we suggest you to use the latest kernel >= 2.6.35.
but if you want to use our driver in an old kernel,
you can use compat-wireless. this methord can support all kernel
versions higher than 2.6.24, and you can use all functions
of our driver like you use it in the latest kernel version.
You can get more informations of compat-wireless from:
http://wireless.kernel.org/en/users/Download/stable
you should use the following commands to Compile, Installation, or uninstall the driver:
1. Change to Super User
sudo su
2. install compat-wireless driver
./compat/script/compat-install.sh
3. reboot
reboot
4. uninstall driver
./compat/script/compat-uninstall.sh
5. you can get more information form follwing webset for how to use compat-wireless:
http://wireless.kernel.org/en/users/Download/stable
NOTICE:
1. Maybe you can not use other vendors wireless after you install compat wireless,
in this situation, you can uninstall compat-wireless use step 4 to recover it.
2. This install methord can support all versions of kernel, not just 2.6.24-2.6.34,
you can also use it in the kernel higher than 2.6.35.
========================================================================================
IV. Start Up Wireless
========================================================================================
You can use two methord to start up wireless:
1. Install driver like II. and reboot OS, Wireless will be brought
up by GUI, such as NetworkManager
2. If Wireless is not brought up by GUI, you can use:
ifconfig wlan0 up
Note: some times when you have two wireless NICs on your computer,
interface "wlan0" may be changed to "wlan1" or "wlan2", etc.
So before "ifconfig wlan0 up", you can use "iwconfig" to check
which interface our NIC is.
Note: Don't try to down driver by "ifconfig wlan0 down" when
NetworkManager id opened, because NetworkManager will up
driver automatically.
========================================================================================
V. Wireless UI & NetworkManager
========================================================================================
1. All latest distributions have UI & NetworkManager to like with AP.
And it's more easy to link with AP than commandline,
So we suggest you use UI to link with AP.
2. Don't try to like with AP use commandline with UI or NetworkManager opened.
3. If you still used commandline to link with AP, Please check if
NetworkManager & wpa_supplicant is killed by follwing command:
ps -x | grep NetworkManager
ps -x | grep wpa_supplicant
4. Follwing commandlines(V-VII) are all used under Linux without UI.
========================================================================================
VI. Set wireless lan MIBs
========================================================================================
This driver uses Wireless Extension as an interface allowing you to set
Wireless LAN specific parameters.
1. Current driver supports "iwlist" to show the device status of nic
iwlist wlan0 [parameters]
you can use follwing parameters:
parameter explaination [parameters]
----------------------- -------------
Show available chan and freq freq / channel
Show and Scan BSS and IBSS scan[ning]
Show supported bit-rate rate / bit[rate]
For example:
iwlist wlan0 channel
iwlist wlan0 scan
iwlist wlan0 rate
2. Driver also supports "iwconfig", manipulate driver private ioctls,
to set MIBs.
iwconfig wlan0 [parameters] [val]
you can use follwing parameters:
parameter explaination [parameters] [val] constraints
----------------------- ------------- ------------------
Connect to AP by address ap [mac_addr]
Set the essid, join (I)BSS essid [essid]
Set operation mode mode {Managed|Ad-hoc}
Set keys and security mode key/enc[ryption] {N|open|restricted|off}
For example:
iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
iwconfig wlan0 essid "ap_name"
iwconfig wlan0 mode Ad-hoc
iwconfig wlan0 essid "name" mode Ad-hoc
iwconfig wlan0 key 0123456789 [2] open
iwconfig wlan0 key off
iwconfig wlan0 key restricted [3] 0123456789
iwconfig wlan0 key s:12345
Note: There are two types of key, "hex" code or "ascii" code. "hex" code
only contains hexadecimal characters, "ascii" code is consist of
"ascii" characters. Assume the "hex" code key is "0123456789", you
are suggested to use command like this "iwconfig wlan0 key 0123456789".
Assume the "ascii" code key is "12345", you should enter command
like this "iwconfig wlan0 key s:12345".
Note: Better to set these MIBS without GUI such as NetworkManager and be
sure that our nic has been brought up before these settings. WEP key
index 2-4 is not supportted by NetworkManager.
========================================================================================
VII. Getting IP address (For OS without UI)
========================================================================================
Before transmit/receive data, you should obtain an IP address use one of
the follwing method:
1. static IP address:
ifconfig wlan0 IP_ADDRESS
2. dynamic IP address using DHCP:
dhclient wlan0
========================================================================================
VIII. WPAPSK/WPA2PSK (For OS without UI)
========================================================================================
Wpa_supplicant helps you to link with WPA/WPA2(include WPA Enterprise) AP,
in Linux with NetworkManger & UI, UI will help you to link with AP,
But if there is no UI & Networkmanger in your Linux, you can use
follwing method to link with WPA/WPA2 AP.
1. we suppose that your Linux have installed wpa_supplicant &
kernel build with WIRELESS_EXT, In fact, lots of distributions
have done like this.
But if some distribution not install wpa_supplicant,
please download wpa_supplicant from webset and install it.
2. Edit wpa1.conf to set up SSID and its passphrase.
For example, the following setting in "wpa1.conf"
means SSID to join is "BufAG54_Ch6" and its
passphrase is "87654321".
network={
ssid="BufAG54_Ch6"
#scan_ssid=1 //see note 3
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="87654321"
priority=2
}
You can download wpa_supplicant and read wpa_supplicant.conf
for more examples.
3. Execute WPA supplicant:
wpa_supplicant -D wext -c wpa1.conf -i wlan0
4. To see detailed description for driver interface and wpa_supplicant,
please type:
man wpa_supplicant
