Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

Universal debranding s22 and s931

thanks TS working sken yan tut,, na debrand ko ung s22 ko thru gui update walang kahirap hirap,,,:clap:
 
TS, pa-help po... nadebrand ko s22 ko successfully ng wlang kahit anong error o delay, lumakas cgnal ko from 2 bars to full tsaka ang speed na 2mbps ay naging 4.5mbps, 15km ang layo sa tower kya ginamitan ko ng skywave antenna. nag-load ako supersurf50 tapos na-ishare ko sa 10 units pc ko. Okay nman cya for 3 hours tapos bumagal ang net na sobrang bagal pero full bars pa rin ang signal. ano kaya ito capping or may problema sa modem? please help po.
 
Last edited:
salamat dito sir...nagamit ko na rin ang 931 ko.mas okay kasi nawala ang marka ng globe.mas lumakas din ang signal ng madebrand.dati kasi,3 bars ang signal kahit may mimo antenna.ngayon,kahit wala ng mimo,full bars na.salamat sa pag share nito.mabuhay po kayo!!!!:):):):):)
 
@chaos79

sir pa help naman b593s-22 successfully ko na- debrand ko ung sa akin ang problem ko ay na hardreset ko sya kaya di ko ma access ung GUi nya di ko alam ang password sa pagkakabasa ko kasi kapag na-debranded na at na hardreset ang b593s-22 mawawala ung User at pass ngayon ang solution ay bumalik sa Globe eto ang firmware ko (V200R001B236D30SP00C00) kung tama ang pagkakaintindi ko need ko muna flash sya sa FINLAND Firmware then go to Stock Firmware Globe v30. tama ba sir? nag click ako dun sa Finland firmware not available na yata ung link...pa help naman

salamat in advance...
 
maraming salamat dito TS.. OK sana yung debrand kaso may dis advantage, hindi makita yung mga details sa RSSI,RSRP at yung value nung signal strenght. bali pag pinasok yung 192.168.1.1 daretso agad sa login, hindi tulad sa globe makikita mo pa yung buong details like CELL ID,, any suggestion po? baka may tricks para makita yung gui na katulad ng sa globe para mas madali mag pihit ng anttena.. maraming salamat po ulit
 
Pa help po.. Ano po gagawin sa B593s-22 if walang INTERNET menu po sa GUI?

Salamat po ng marami..
 
UNIVERSAL DEBRANDING AND GLOBE STOCK VICE VERSA for B593s-22

THIS IS FOR EDUCATIONAL PURPOSES ONLY

Before Debranding your modem I suggest to openline/unlock it first and upload admin config file by jhosherxx

OPENLINE/UNLOCK YOUR B593 PROCEDURE HERE

NOTE : Please check your current stock firmware. For easy debranding your modem firmware should be Service pack.30 ("V200R001B180D20SP30C158").

LEGEND

V = Version
R = Release
B = Build
D = Debug
SP = Service Pack
C = Customization

DEBRANDING PROCEDURE

1. Connect your modem thru lan cable to your pc
2. Turn on your modem
3. I open ang Multicast at sundan ang setting sa screen shot

View attachment 964688

4. Bago i click ang start button sa multicast i off muna ang modem. ngayon balik ka sa multicast at i click ang start button.
5. turn on your modem antayin hanggang sa mag full bar na ang signal ng modem it means tapos na ang update.
6. click stop button sa multicast at i closed ang application(multicast).
7. Turn off your modem then turn on again.
8. Go to your browser at mag log in ka sa gui ng modem. I refresh mo lang ang browser kung hindi parin natatanggal ang tattoo or globe logo

Kung nahihirapan mag update thru multicast pwede rin sa gui access mo lang ang modem as user or admin then home tab> update upload nyo lang ang mod firmware then click update

FIRMWARE DOWNLOAD HERE

UPDATES

>Stock firmware updated from Service Pack .25 to Service Pack .30

NOTE:
Im using universal firmware version "V200R001B236D30SP00C00" kung hindi po ito ang gamit nyo you cannot used my mod firmware to get back to stock firmware.

Q & A

Mababago ba ng debranding ang settings ng modem after ng procedure? HINDI mababago after debranding such as admin password, SSID, wifi password etc.

How to get back to original globe firmware? The same procedure lang po ng debranding pero this time "universal to globe stock fw bin file" na ang gagamitin nyo. pwede rin mag update thru gui ng modem.

How to return to globe stock firmware after "RESET" in universal firmware? After reset while using universal firmware hindi po natin ma aaccess ang gui ng modem natin. Eto ang dapat nating gawin.

1. Connect your modem to your pc by using LAN cable then used static or manual ip
(if you dont know how here's the link)

USE THE FOLLOWING IP ADDRESS

IP address 192.168.254.1
Subnet mask 255.255.255.0
Default gateway 192.168.254.254
Preferred DNS server 8.8.8.8
Alternative DNS server 8.8.4.4


2. Reboot your pc
3. Go to your browser and type 192.168.254.254 dapat ma access mo ang GUI ulit ulitin mo Lang hangang makapasok SA GUI.
4. Once nakapasok kana sa gui it means detected na ng pc ang modem mo. I open ang multicast at gayain lang ang nasa screenshot

View attachment 964720

5. After multicast settings sundan lang ulit ang procedure sa taas from 4-7. ( Debranding procedure)
6. Balik uli SA browser type 192.168.254.254 dapat ngayon maka access kana SA GUI. Log in as user (if Hindi maka login as user default password Ng globe I reset mo uli ang modem then mag login uli) upload ang config file para may admin access ka.
7. Tanggalin sa manual ip ang pc at i reboot.
8.. Then go to your browser type 192.168.1.1 done! Globe stock firmware kana ulit. Kung gusto mo ibalik sa universal same procedure ng mga naunang tuts sa pag update….. Good luck


B593S-931 UNLOCK AND UNIVERSAL DEBRANDING WITH GLOBE STOCK VICE VERSA

Note : After debranding wala parin LTE connection for smart user.

PROCEDURE

1. Used multicast pakigaya nalang po ang settings sa taas
2. To unlock your 931 modem used 931 unlock bin file
3. after mo ma unlock ang modem punta ka sa gui access your modem as user account (use this as your password @l03e1t3) then upload admin config file ni Jhoshexx. para may admin access ka na before mag debrand.
4. Last step upload mo na ang 931 debrand firmware. Boom debranded na ang 931 modem mo with original 931 firmware check sa product information.
5. If you HIT RESET botton while in universal firmware ibalik nyo lang po sa globe stock firmware I follow nyo lang po ang TUT's sa itaas Static Ip Address and multicast procedure

UPDATES

>Pwede na ibalik sa globe stock firmware from debrand firmware 10/24/14

>931 stock firmware with service pack 05 compatible (V200R001B270D15SP05C158) 10/11/14

>This time your b593s-931 modem will debranded with original universal Firmware 09/25/14

931 UNLOCK & DEBRAND FIRMWARE

931 GLOBE STOCK FIRMARE

CREDIT : Thanks to Sir "LechonJames" for sharing his 931 original firmware

Sa lahat naman ng 931 user na naka universal s22 modified firmware paki check kung ang gamit ninyong firmware ay ganito (V200R001B236D30SP00C00) pwede kayong mag update using 931 original universal firmware

FIRMWARE DOWNLOAD HERE


-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

B593s-22 FINLAND USER ETO NA ANG FIRMWARE PARA MAKABALIK SA GLOBE STOCK FIRMWARE your finland firmware version should be (V200R001B180D20SP05C260)

DOWNLOAD HERE

I will public this link because I can't accommodate all the request on my private inbox. So please guy's be nice on your comment. Just say THANKS is enough for me. To all newbies paturo nalang po kayo sa mga PRO na marunong sa multicast Good Luck and Godbless Us...

ALL RAR PASSWORD

I'M NOT RESPONSIBLE WHAT EVER HAPPENED TO YOUR MODEM. USED THIS AT YOUR OWN RISK


S22 GLOBE STOCK FIRMWARE SERVICE PACK 30 Download here
Post your experience just click "comment" thanks

Follow my Facebook Page Chaos79 Support




sir di ko po ma download ung debrand link. wala na daw. pa help po. please
 
mga sir pa post nmn po ng ibang download link para sa s-931 na firmware update. wala na sa mediaf!re. TIA
 
boss chaos, meron na debrand nung b593s-931 AUGUST 13 firmware,,,,, back read ako di kasi nag tutuloy sa flashing 2bars lang sya
 
Sir chaos, D po kita ma message kaya dito ko nalang e post yung concern ko.
Good morning po pala sir chaos79,
I'd like to seek help regarding to my newly purchased b593s-22 from my respective supplier. Binili ko po yung unit as 2nd hand, pag tanggap ko po ng unit nka globe locked pa po sya kaya ginawa ko is inunlock ko po yung modem. I did 3 attempts to successfully unlocked the modem, in first 2 attempts po error po yung lumbas after 3rd attempt sucess na po but in testing the signal using smart. Wala po syang na dedetech , 0 signal po then i tried using globe and still the same result. Dun, I got nervous considering nasira ko yung modem. What I did is nireset ko ung modem for almost 4 times and still same result. Pwede nyo po ba akong tulungan ma fix ung problem ng modem ko sir chaos.. Thanks po..
 
tanong lng po ung debranded at openline mag kaparehas lng po ba? or magkaiba sorry newbie lng po
 
boss chaos, meron na debrand nung b593s-931 AUGUST 13 firmware,,,,, back read ako di kasi nag tutuloy sa flashing 2bars lang sya

same here ayaw mag tuloy.... may solusyon na ba dito?
 
maraming salamat dito TS.. OK sana yung debrand kaso may dis advantage, hindi makita yung mga details sa RSSI,RSRP at yung value nung signal strenght. bali pag pinasok yung 192.168.1.1 daretso agad sa login, hindi tulad sa globe makikita mo pa yung buong details like CELL ID,, any suggestion po? baka may tricks para makita yung gui na katulad ng sa globe para mas madali mag pihit ng anttena.. maraming salamat po ulit
SYSTEM>DIAGNOSIS>Wireless status check :lol: MERON DIN System check PARA MAKITA MO BUONG DETAILS NG S22 MO :rofl:
 
Last edited:
re up naman po ng mga links. dead link na kasi.

need to go back to globe FW
thanks TS!!
 
Boss dead link na yung globe stock firmware. pls pa update po. Salamat po...
 
Back
Top Bottom