- Messages
- 71
- Reaction score
- 0
- Points
- 26
Activate your Windows 8.1 ENT or PRO
I used W8.1 PRO Build 9600 64bit when doing this Tutorial. Try for yourself using other W8.1 PRO & ENT Variant.
ACTIVATION 1
STEP
1.REMOVE installation key first follow my SS
Download,zip and Run
http://symbianize.com/attachment.php?attachmentid=794317&stc=1&d=1380271998
2.Downbload activator
http://symbianize.com/attachment.php?attachmentid=794856&stc=1&d=1380378928
3.Right click A9600E (from enterprise or pro.) and select run as administrator follow my SS
http://symbianize.com/attachment.php?attachmentid=794305&stc=1&d=1380269357
Check your Computer properties
Mine is shows like this
http://www.symbianize.com/attachment.php?attachmentid=794306&stc=1&d=1381388847
4.Download and Unzip My_WCP_watermark editor.zip
http://symbianize.com/attachment.php?attachmentid=794307&stc=1&d=1380269357
follow my SS and wait to complete the Processed
http://symbianize.com/attachment.php?attachmentid=794308&stc=1&d=1380269357
VIOLA your W8.1 Already Activated
THANKS lang po kung nakatulong..
ACTIVATION 2
Sa mga gusto ng manual activation ngunit di na kayo gagamit pa ng Skype pwede nyo subukan itong backup serial at activation key ko.
STEP and REQUIREMENTS
1.Download W8.1 Pro from this link---- http://www.symbianize.com/showthread.php?t=1026003 then after install
2.REMOVE installation key first follow my SS
Download,zip and Run
http://symbianize.com/attachment.php?attachmentid=794317&stc=1&d=1380271998
3.Run CMD as Administrator
type SLUI 3 enter this serial key
NTTX3-RV7VB-T7X7F-WQYYY-9Y92F
wait for system to accept the key and prompt that it's done.
4.Run CMD as Administrator
type SLUI 4, select UNITED KINGDOM, next you will see your installation I.D this must be appeared in the installation I.D (if NOT DO NOT CONTINUE This process and proceed to the Activation 1)
installation i.d
5798411 5450483 2943601 1243920 6545380 2885066 9612621 9251254 1949360
5.Click ENTER CONFIRMATION I.D and enter to fields this confirmation
Confirmation Key
A 054343
B 968884
C 830996
D 505981
E 885621
F 883754
G 975792
H 926443
6.Click ACTIVATE WINDOWS and wait for the process to finish and prompt saying "Thanks, you're all done." then click Close and restart.
7.You're done but still has a watermark, you can use watermark remover attached
I used W8.1 PRO Build 9600 64bit when doing this Tutorial. Try for yourself using other W8.1 PRO & ENT Variant.
ACTIVATION 1
STEP
1.REMOVE installation key first follow my SS
Download,zip and Run
http://symbianize.com/attachment.php?attachmentid=794317&stc=1&d=1380271998
2.Downbload activator
http://symbianize.com/attachment.php?attachmentid=794856&stc=1&d=1380378928
3.Right click A9600E (from enterprise or pro.) and select run as administrator follow my SS
http://symbianize.com/attachment.php?attachmentid=794305&stc=1&d=1380269357
Check your Computer properties
Mine is shows like this
http://www.symbianize.com/attachment.php?attachmentid=794306&stc=1&d=1381388847
4.Download and Unzip My_WCP_watermark editor.zip
http://symbianize.com/attachment.php?attachmentid=794307&stc=1&d=1380269357
follow my SS and wait to complete the Processed
http://symbianize.com/attachment.php?attachmentid=794308&stc=1&d=1380269357
VIOLA your W8.1 Already Activated
THANKS lang po kung nakatulong..
ACTIVATION 2
Sa mga gusto ng manual activation ngunit di na kayo gagamit pa ng Skype pwede nyo subukan itong backup serial at activation key ko.
STEP and REQUIREMENTS
1.Download W8.1 Pro from this link---- http://www.symbianize.com/showthread.php?t=1026003 then after install
2.REMOVE installation key first follow my SS
Download,zip and Run
http://symbianize.com/attachment.php?attachmentid=794317&stc=1&d=1380271998
3.Run CMD as Administrator
type SLUI 3 enter this serial key
NTTX3-RV7VB-T7X7F-WQYYY-9Y92F
wait for system to accept the key and prompt that it's done.
4.Run CMD as Administrator
type SLUI 4, select UNITED KINGDOM, next you will see your installation I.D this must be appeared in the installation I.D (if NOT DO NOT CONTINUE This process and proceed to the Activation 1)
installation i.d
5798411 5450483 2943601 1243920 6545380 2885066 9612621 9251254 1949360
5.Click ENTER CONFIRMATION I.D and enter to fields this confirmation
Confirmation Key
A 054343
B 968884
C 830996
D 505981
E 885621
F 883754
G 975792
H 926443
6.Click ACTIVATE WINDOWS and wait for the process to finish and prompt saying "Thanks, you're all done." then click Close and restart.
7.You're done but still has a watermark, you can use watermark remover attached
Attachments
Last edited: