Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.
All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!
paano mag have disk ?
jan ako nalilito
share lang ulit mga kaSB, hindi ko alam kung bakit naging ganito version ko.View attachment 1169587
share lang ulit mga kaSB, hindi ko alam kung bakit naging ganito version ko.View attachment 1169587
Thanks ! Thanks ! Buhay na ulit 936 ko maraming salamt dito . kaso ang prob ko d na naoopenline ung akin bumalik sa 254.254 kahit mag multicast ako wala parin d nagtutuloy sa green(USB Mode)
ingat na lang po pagawa bka madeadboot 936 new gawa sakin..tingin ko working to may mali lang aq nagawa.....basahin muna instruction ng paulit ulit..
ala na talaga trinay ko dead na di na madetect kahit sa balong.AFter po?globelock sim not detected.192.168.254.254 gui.at nakakalog in din sa admin.pero sim not detectedpwede pa yan sir.. flash ka ng new way of flashing ng 936.. pero babalik ka sa power led only.
Ts panu ba yung new way of flashing?
sir nakapolkomtel ako before nasira.. old 936 din.. yan lang ginawa ko.. pero ngflash ako using new way 936 openline pero powerlight pa din.. then nakita ko sa 4pda.ru.. gumana naman..
eto link.. google translate na lang.. http://4pda.ru/forum/index.php?showtopic=700481&st=680
sir pa guide ako saan ako nagkamali, mukang may nakalimutan ako gawin. eto na mga nagawa ko.
Do the needle trick. (The baklas modem, short pins, then plug power, no powerlight pero detected siya as comport).
run balong usb download
detect 3g pc ui (com#)
loader - yung bin file
then LOAD
next is yung fw folder
run go hdlc then enter
next is huawei flasher
Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close
dito sa part na to ay sinunod ko na yung step mo
nag try ako na unplug usb at power.
then hold power + reset then plug power
umilaw yung red
wait ako gang mawala yung red light
then release power + reset
waiting mag blue light + 2 bars = ok umilaw xa mga 3 secs then nawala
natira yung power led light on nalang
waiting ako mag red ulit kaso tagal ko naghihintay di na umilaw ng red ulit.
--- etong part na to ata ang my problem ako
kaya kahit mag cmd command ako nito ay failed yang dalawa na yan.
10. Sa CMD ulit, type
Code:
fastboot -i0x12d1 erase nvimg
11. Dapat may response na "OK".
12. Sa CMD ulit, type
Code:
fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".
yung 1st command ok naman
8. Sa CMD, type
Code:
fastboot -i0x12d1 getvar product
9. Dapat may magpakita na - product: balongv7r2
--mula 10 failed na eh.
sino po may solution dito? tia
sir pa guide ako saan ako nagkamali, mukang may nakalimutan ako gawin. eto na mga nagawa ko.
Do the needle trick. (The baklas modem, short pins, then plug power, no powerlight pero detected siya as comport).
run balong usb download
detect 3g pc ui (com#)
loader - yung bin file
then LOAD
next is yung fw folder
run go hdlc then enter
next is huawei flasher
Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close
dito sa part na to ay sinunod ko na yung step mo
nag try ako na unplug usb at power.
then hold power + reset then plug power
umilaw yung red
wait ako gang mawala yung red light
then release power + reset
waiting mag blue light + 2 bars = ok umilaw xa mga 3 secs then nawala
natira yung power led light on nalang
waiting ako mag red ulit kaso tagal ko naghihintay di na umilaw ng red ulit.
--- etong part na to ata ang my problem ako
kaya kahit mag cmd command ako nito ay failed yang dalawa na yan.
10. Sa CMD ulit, type
Code:
fastboot -i0x12d1 erase nvimg
11. Dapat may response na "OK".
12. Sa CMD ulit, type
Code:
fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".
yung 1st command ok naman
8. Sa CMD, type
Code:
fastboot -i0x12d1 getvar product
9. Dapat may magpakita na - product: balongv7r2
--mula 10 failed na eh.
sino po may solution dito? tia