B315s-936 power light only solution

[jackiebray]

Baka May taga Imus or las piñas sa inyo pa help sa modem ko. Fastboot na sana kaso wala blue light. Red tapos 2 signal Lang. I'll pay Basta makatarungan po salamat

subukan mo nalang i saksak idol tapos ipilit mo adb ok yan

 

[dj_sanoj]

anung sim gamit mo idol dapat LTE sim ha para maka sagap ng 4g?? nung in open line bha modem mo ,,all network nilagay mo sa putty ...sa pag unlock ng modem???

matagal na tong debrand sakin sa POLCOMTEL nasira lang sa laging brownout saka LTE SIM gamet ko dati ok naman sa LTE 4G signal..

 

[marcus_panget]

subukan mo nalang i saksak idol tapos ipilit mo adb ok yan

ipilit ng ipilit yung driver paano mo mapipilit kung yung device hindi naka fastboot mode ok na yan tinulungan ko na

 

[technosky]

Tuts for B315s-936 power light only.
*Basahin lahat muna bago simulan.. may mga revisions.

working lang on following conditions:

1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.
2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.

Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.

Steps:

Note: Reported po na mas successful pag gawin muna yung new 936 flashing by sir Jansen Ramos.
http://www.symbianize.com/showthread.php?t=1371603
Mostly lahat nang successful e ginamit Win7 64bit OS.

1. Hard reset, either :

a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.
​

2. Hintayin umilaw blue light at last two signal bars. wag galawin.
3. Hintayin umilaw red light at first and last signal bars. wag galawin.
4. Hintayin na power light na lang. plug usb to usb cord.
5. Check sa device drivers dapat may unknown o Android ADB Interface ka.
6. Ipilit and driver na - Android ADB Interface, mag have disk ka. piliin mo yung nasa folder adb_driver_windows
7. Go to run then CMD. - Change ka sa directory kung saan mo inextract yung files - "CD c:\files"

Dapat yung cmd mo "c:\files>"​

8. Sa CMD, type

fastboot -i0x12d1 getvar product

9. Dapat may magpakita na - product: balongv7r2

10. Sa CMD ulit, type

fastboot -i0x12d1 erase nvimg

11. Dapat may response na "OK".

12. Sa CMD ulit, type

fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin

13. Dapat may response na "OK".

14. Reboot na

b315s-936_for_powerlight_only.rar
Additional files http://www.mediafire.com/file/w75a9mn87m2pitp/tools.rar

Source: 4pda.ru

win 8.1/10 os patch:
http://www.mediafire.com/file/8etvc0u6gzo4608/USB_NOT+RECOGNIZE+FIX_jansen.reg
credits to sir jansen ramos

Second trick to try,
Pero start with the needle trick,
(shorted debug pins, then plug power, plug usb, no powerlight but detected as 3G PC UI interface)
Instructions inside.
fix2b315.rar
*try at you're own risk sa second trick kasi lahat ng result e deadboot, pero you can always go back to power led only using new 936 flashing.

Source link kung gusto nyo magbasa.. google translate na lang
http://4pda.ru/forum/index.php?showtopic=700481&st=680

Middle East firmware credits to Sir rexzero
http://www.symbianize.com/showthread.php?t=1393606&p=22514169&viewfull=1#post22514169

Zain Firmware credits kay Sir mulot
https://www.mediafire.com/?371hp9w4j9veb3f

thanks master..

 

[altrax]

Baka May taga Imus or las piñas sa inyo pa help sa modem ko. Fastboot na sana kaso wala blue light. Red tapos 2 signal Lang. I'll pay Basta makatarungan po salamat

Same problem po ako nito baka may makatulong?

 

[patetot11]

dito na ako na stuck pano kaya eto pong files ang eextract ko sa cd files

 

[miksgalle13]

mga boss pa help po eto nalabas error nya sana maaus pa.. tia

View attachment 308775

 

[xcrackerz16]

Thanks sa tutorial Working na ulit sakin using Middle East firmware. Problem ko lang po parati may nalabas na 'Update Available' then kapag update ko naman , 'Update Failed' parati

 

[choybel]

Mga masters! Una sa lahat thank you po at nabuhay din 2 unit ko. Kaso may problem ako, hindi ko sya aflash to other firmwares. Pagkabuhay nya using this method napansin ko back to globe firmware sya pero openline na. old 936 po pareho ung unit ko and middle east fw po ung ginamit ko para buhayin. Hindi ko na po kaya ibackread lahat ng pages dito so please baka may nakakaalam ng solution to reflash to other firmware pagkatapos sya buhayin...salamat po and more power!

 

[iamback100517]

Tuts for B315s-936 power light only.
*Basahin lahat muna bago simulan.. may mga revisions.

working lang on following conditions:

1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.
2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.

Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.

Steps:

Note: Reported po na mas successful pag gawin muna yung new 936 flashing by sir Jansen Ramos.
http://www.symbianize.com/showthread.php?t=1371603
Mostly lahat nang successful e ginamit Win7 64bit OS.

1. Hard reset, either :

a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.
​

2. Hintayin umilaw blue light at last two signal bars. wag galawin.
3. Hintayin umilaw red light at first and last signal bars. wag galawin.
4. Hintayin na power light na lang. plug usb to usb cord.
5. Check sa device drivers dapat may unknown o Android ADB Interface ka.
6. Ipilit and driver na - Android ADB Interface, mag have disk ka. piliin mo yung nasa folder adb_driver_windows
7. Go to run then CMD. - Change ka sa directory kung saan mo inextract yung files - "CD c:\files"

Dapat yung cmd mo "c:\files>"​

8. Sa CMD, type

fastboot -i0x12d1 getvar product

9. Dapat may magpakita na - product: balongv7r2

10. Sa CMD ulit, type

fastboot -i0x12d1 erase nvimg

11. Dapat may response na "OK".

12. Sa CMD ulit, type

fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin

13. Dapat may response na "OK".

14. Reboot na

b315s-936_for_powerlight_only.rar
Additional files http://www.mediafire.com/file/w75a9mn87m2pitp/tools.rar

Source: 4pda.ru

win 8.1/10 os patch:
http://www.mediafire.com/file/8etvc0u6gzo4608/USB_NOT+RECOGNIZE+FIX_jansen.reg
credits to sir jansen ramos

Second trick to try,
Pero start with the needle trick,
(shorted debug pins, then plug power, plug usb, no powerlight but detected as 3G PC UI interface)
Instructions inside.
fix2b315.rar
*try at you're own risk sa second trick kasi lahat ng result e deadboot, pero you can always go back to power led only using new 936 flashing.

Source link kung gusto nyo magbasa.. google translate na lang
http://4pda.ru/forum/index.php?showtopic=700481&st=680

Middle East firmware credits to Sir rexzero
http://www.symbianize.com/showthread.php?t=1393606&p=22514169&viewfull=1#post22514169

Zain Firmware credits kay Sir mulot
https://www.mediafire.com/?371hp9w4j9veb3f

idol pwde ba to sa old 936 ? stock lang sa power light blinking eh

 

[bearheart24]

idol pwde ba to sa old 936 ? stock lang sa power light blinking eh

pwede kaka try ko lang sa old ko .. zain ginamit ko.. salamat pala ts God bless

 

[czia]

Mga ka symbianize gumgana ba sa win7 32bit? Ayaw kasi maditect c android

 

[Jimnice01]

Magagawa pa po ba yung sakin, ang nangyari kasi bigla nag brownout pero saglit lng mga 3sec. Nawalan kuryente tapos pag power ng modem bigla hanggang power led light nalang, sinubukan ko ng gawin yung nasa first post pwera sa may jumper teknik, ang ginawa ko po kasi reser+power bale nagpupula tapos mawawala ng mabilis tapos mga 20sec lalabas yung blue light at 2signnal bars, ang problema mga 3sec. Lng mawawala agad yung blue tapos wala na, tulala nanaman..
Yung modem ko pala ay yung walang sticker,


- - - Updated - - -

matagal na tong debrand sakin sa POLCOMTEL nasira lang sa laging brownout saka LTE SIM gamet ko dati ok naman sa LTE 4G signal..

Same tayo ng nangyari. Sana pwede pa to magawa,

- - - Updated - - -

Sa wakas, matapos ang maraming pagsubok, gumana na ulit modem ko, kaso bigo ako makabalik sa polkomtel, pero ayos lng malakas naman signal ng Zain, ang nangyari kasi naka middle east nako natagalan din ako bago makuha lahat ng tut, sa kagustuhan kong makabalik sa polko, sinubukan ko yung middle east to polkomtel na firmware, nabigo ako dun at muntik na ako sumuko, kasi bumalik ulit sa tulala, ang nangyari pa ayaw na gumana nung new method sa 936, kaya nawalan nako pag-asa , pero dahil wala ako pambili pa ng isang modem, nagbasa ako sa ibat ibang forum, kaso halos parang copy paste lng lahat , meron akong isang nabasa sa iba sya nag jumper, ayun yung sinubukan ko , tapos nun nag flash na ulit, bale zain na ginamit ko, napangitan kasi ako sa middle east, pawalawala signal ko, after 5hours na pagpupuyat, sawakas tagumpay ! hahaha!

MARAMING MARAMING SALAMAT SA BUMUO NG THREAD NA TO, pati na rin sa mga ibang comment, dami ko natutunan, GodBless!!

 

[mervin72]

Mga ka symbianize gumgana ba sa win7 32bit? Ayaw kasi maditect c android

Pag may nakita kang unknown device, Mag "have disk" ka when searching for device driver at hanapin mo yung sa winusb file then force mo lagay yung Android device interface.

- - - Updated - - -

May dalawang concerns lang ako sa process na ito,
Afrer successfully revived the modem...

1. Nung I-set ko sa network mode to 3g or 4g only, nagrereset sa "AUTO" mode after kong i-off ang modem(tested ko ito sa apat na modem na narevive ko na).

2. Ayaw nang ma-flash ulit ng ibang firmware
using Toolbox, putty, B953 Multiupgrade Tool.
Kahit pa idirect flash ng B931 firmware,ayaw kumagat at nagrereset lng ang modem to its steady state na parang walang nangyari.
Tried also so upgrade firmware to LOCAL UPDATE, pero failed.

Sana may makakatulong neto.... Try ko lng sana palitan ng firmware ng polkomtel...

 

[czia]

Pag may nakita kang unknown device, Mag "have disk" ka when searching for device driver at hanapin mo yung sa winusb file then force mo lagay yung Android device interface.

- - - Updated - - -

May dalawang concerns lang ako sa process na ito,
Afrer successfully revived the modem...

1. Nung I-set ko sa network mode to 3g or 4g only, nagrereset sa "AUTO" mode after kong i-off ang modem(tested ko ito sa apat na modem na narevive ko na).

2. Ayaw nang ma-flash ulit ng ibang firmware
using Toolbox, putty, B953 Multiupgrade Tool.
Kahit pa idirect flash ng B931 firmware,ayaw kumagat at nagrereset lng ang modem to its steady state na parang walang nangyari.
Tried also so upgrade firmware to LOCAL UPDATE, pero failed.

Sana may makakatulong neto.... Try ko lng sana palitan ng firmware ng polkomtel...

brod ngawa ko error ang sabi 64bit ang kailangan

 

[herwin1277]

Pa-BM mga senpai salamat dito

 

[DREFILC]

boss ask kulang kung galing ba sa middle east firmware mababalik pa kaya sa polkom kasi ung 936 ko ayaw na sa polkom eh tulala nalang sya after flash using polkom firmware

 

[marcus_panget]

boss ask kulang kung galing ba sa middle east firmware mababalik pa kaya sa polkom kasi ung 936 ko ayaw na sa polkom eh tulala nalang sya after flash using polkom firmware

Hindi at magiging tulala yan uli

@CZIA yes pwede yan sa W732B na OS

 

[DREFILC]

cno po meron jan edited na firmware ung Middle East(21.300) to Zain pa link nmn po try ko mag flash using multicast salamat po

https://www.mediafire.com/?371hp9w4j9veb3f pag yan po ba ginamit ko pangflash need ko paba sundin to oh ndi na



8. Sa CMD, type
Code:
fastboot -i0x12d1 getvar product
9. Dapat may magpakita na - product: balongv7r2

10. Sa CMD ulit, type
Code:
fastboot -i0x12d1 erase nvimg
11. Dapat may response na "OK".

12. Sa CMD ulit, type
Code:
fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".

14. Reboot na

 

[MECANIKO]

hindi ko ito kaya