BM622m Toolkit and 22m/235T Toolkit support thread

[farhan25]

boss no luck sakin.. nagiging old mac series yung smart pag nag change mac ako.. reboot man o no reboot..
View attachment 916395

boss na add mo ba ung mac mo sa edit list smart series???

kasi sakin ok naman sa frequency lang ang error sakin hindi mapalitan.........

 

[trunks]

boss na add mo ba ung mac mo sa edit list smart series???

kasi sakin ok naman sa frequency lang ang error sakin hindi mapalitan.........

ayy hindi pa pala.. wait tignan ko ulit..

- - - Updated - - -

ok na pala.. working sakin yung change mac sa smart.. wala din ako problema sa frequency

- - - Updated - - -

sensya na boss kung malangaw feedback ko.. hahaha..

 

[Zyyy]

@boss lava

pwede sa bm622m to right? i mean yung smart thing

 

[MacHunter]

ok naman ang change mac niya gamit ang smart mac ang problem lang boss is ung frequency hindi niya npapalitan........



bali ung dv ko globe siya dati din change mac ako gamit ang tools mo na 3.0 sa smart mac....... change mac ok pero ung frequency ng modem hindi npalitan kahit na nka select sa tool is smart frequency..........


nag manual add frequency nlang ako sa smart un connect na sa smart.........



View attachment 916311




View attachment 916312

tapos binalik ko sa globe mac ok nman un lang sa frquency lang tlga nagkaka problem....... hindi niya mpalitan..........

View attachment 916313

Sinubukan ko kanina. Ganyan din error sakin. Di mapalitan frequency ng smart. Dv 235t Mybro v.7 gamit ko.

- - - Updated - - -

ayy hindi pa pala.. wait tignan ko ulit..

- - - Updated - - -

ok na pala.. working sakin yung change mac sa smart.. wala din ako problema sa frequency
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test3_zpsafabff2b.png
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test2_zps144bf0ec.png
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test4_zpsfceabad3.png
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test5_zps63901047.png

- - - Updated - - -

sensya na boss kung malangaw feedback ko.. hahaha..

Pa pm naman bro, 5mbps mo nilalangaw na oh. Hehe. Tia!

 

[Deadmax_]

pa pm naman po ako ng pssword ng beta v2.10.03 salamat

 

[lavaboy]

dv 235t ang modem ko bosss......



ito ang result.........................

smart mac and smart tower TO globe mac and globe tower
View attachment 916337



globe mac and globe tower TO smart mac and smart tower
View attachment 916340

same error boss sa frequency lang........... hindi mapalitan..............

kahit ilang press ko ng set boss error tlaga sa frequency...............

- - - Updated - - -

pag pindot kong refresh na palitan lahat pwera lang sa frequency.........
View attachment 916354

nong nag manual add ako ng frequency ng smart din press set ok na wla na ang error....................
View attachment 916355

boss, lagi lumilitaw yung error message sa yo? ano windows version mo? paki try mo nga ibang compatibility mode sa properties ng BMT.exe. TIA...

ayy hindi pa pala.. wait tignan ko ulit..

- - - Updated - - -

ok na pala.. working sakin yung change mac sa smart.. wala din ako problema sa frequency
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test3_zpsafabff2b.png
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test2_zps144bf0ec.png
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test4_zpsfceabad3.png
http://i1311.photobucket.com/albums/s669/hewlett_packard1/test5_zps63901047.png

- - - Updated - - -

sensya na boss kung malangaw feedback ko.. hahaha..

tnx!

natry mo na ba sir from globe mac change to working smart mac without reboot kung nagcoconnect? TIA

@boss lava

pwede sa bm622m to right? i mean yung smart thing

pwede daw sabi nila pero di ko pa alam kung ano settings para tumanggap ng smart frequency ang 22m...

 

[farhan25]

boss, lagi lumilitaw yung error message sa yo? ano windows version mo? paki try mo nga ibang compatibility mode sa properties ng BMT.exe. TIA...

window XP sp 3 ang windows ko boss....... lumilitaw lang ang error pag papalitan ko ng frequency ng globe to smart or smart to globe........... pero pag smart mac lang ang gamit ko at smart frequency wlang error...............

 

[lavaboy]

window XP sp 3 ang windows ko boss....... lumilitaw lang ang error pag papalitan ko ng frequency ng globe to smart or smart to globe........... pero pag smart mac lang ang gamit ko at smart frequency wlang error...............

ty..big help...

 

[trunks]

boss puno kahon mo.. send ko sayo SS ko.. hehe

 

[2leng]

Re: BM622m 2012 Mac Changer [Simplest!]

Sana may maging okay na yung win 8.1 64-bit . wish ko lng haha ! kahit yung pang no reboot lng

gamit k vm ware boss solved problema mo

 

[fashalville]

nice........

 

[Zyyy]

@bosslava

boss alam muna to?

http://www.symbianize.com/showthread.php?t=1159653

sana ma add to sa features ng tool mu


Sample

001E104E0B87

[email protected]
[email protected]
wimaxb87

 

[nausniskepol]

i'm reopening this thread. Please refer to this for reference: http://www.symbianize.com/showthread.php?t=1090689&p=19096123&viewfull=1#post19096123

this post is still undergoing edits. Please bear with me...

for 2013 firmware version or bm623m users, read this:


good for version 2013 firmware and bm623m din. why? kasi hindi nyo na kailangan i-enable ang ssh everytime magtetest kayo kung working ang mac. Try lang kayo ng try ng mac until connected. Sa next reboot nyo na lang uli i-reenable ang ssh.

Sa sniper naman, diretso din kahit 2013 firmware or bm623m.

"pwede" sa version 2013 firmware but downgrading to 2012 recommended for ease of use. Bm623m pwede din idowngrade sa bm622m 2012 firmware hindi mawawala ang wifi.


search na lang kayo dito sa symb how to downgrade from 22m-2013/23m to 22m-2012 via winspreader kung gusto nyo mag downgrade sa 2012 firmware or how to enable modem's ssh server kung ayaw nyo na galawin 2013 firmware nyo.

try nyo nga pala to. May video how to use the shareware on bm622m-2013 or bm623m-2013 (thanks to carlsus):
http://www.symbianize.com/showthread.php?t=1142349

you must also have a properly working internet explorer (ie) browser installed in order for some features under "other tools" to work.

nag-eevolve po ang program natin kaya basa-basa na lang po sa thread kung gusto nyo malaman konting history nito or makita ang link ng old downloadables. Yung latest version na lang po kasi ang itinitira ko dito sa first post.


pag inopen nyo ang gui sa browser, mapapansin nyo hindi napalitan ang mac na nakasulat pero sa loob ng modem ay permanently napalitan na ang mac. Try nyo ireboot ang modem at magreregister na sa gui ang last mac used.

Para maprove nyo:
- magprepare kayo ng 2 macs. 1 connected and 1 disconnected.
- iset nyo muna sa disconnected then reboot the modem. Makikita nyo sa gui yung disconnected mac ang nakaregister.
- then use the tool and set the connected mac without rebooting.
- wait and observe...the modem will connect.
- reboot modem and see that the (new) connected mac is now permanent.

-------------------------------------------

for all --> download shareware version 2.04.04.04 @mediafire
limitations of shareware version: Sniping will stop after 3 live macs found.

to continue sniping...
1 "incrementing/decrementing" method - change the starting mac address
2. "by mac list" method - change the list of macs (remove those already tested)
then click the [snipe now] button again.

pwede po ang new at old mac series dito.

* for 64-bit os and windows 7 or higher os, set to run in run as administrator
* also try to run in windows xp compatibility mode if not stable

* problem reported on windows 8 64-bit, try using vmware or downgrade your os


http://www.4shared.com/download/9ou85bqbce/screenshot_1__1_.png




for tuts on how to use the shareware, go here --> http://www.symbianize.com/showthread.php?t=1129138
(* please wait for the thread starter to re-open it)

or refer to the following instruction:



p.s. Hindi ko po sinasagot yung mga hindi nagbasa ng instructions...

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------




this part and the rest of the post is for the registered version only:

for registered users (stable version) --> download registered version 2.06 (dating password)

for registered beta-testers (untested version) --> download registered beta version 2.10.03 (same password)
to use version 2.10.03 and higher, run the extractor program to create bmt.exe file in your folder. This is the actual toolkit program. You can make a shorcut for it if you want but do not rename bmt.exe otherwise it will not run.

* beta-tester positions are full right now so don't pm for password, please.



toolkit update log & guide (applies to current version: 2.10.03)

updates 2.10.03:
- custom "new series" mac prefix list. User can now add new series mac prefix (1st 4 digits) on their own. No need to wait for program update for the "new series" to be supported. "known new series mac prefixes already embedded...no need to add them: 0c96, 346b, 34cd, 5c7d, c8d1, e8cd, e808, c405. Please refer to the lates screenshot at the bottom of this post.
- login credentials when clicking [enable ssh] button returned to "user/0slo051o". This is for new 2012 units with ssh not yet enabled.
- bug-fix: Reverting to old mac after cancelling snipe all session


updates 2.10.02:
- fix on domain after changing to old series mac
- fix on password generation after changing to old series mac then rebooting (a reboot routine will be offered by the program to make changes permanent)
- "reboot routine" offered every time needed in order to save the last change made.
- c4:05: Xx:xx:xx:xx series added
- "create admin" routine required before using "enable ssh"
- "telnetd_enabled 0" changed to "telnetd_enabled 1" during "protect" routine for those who still want to use telnet (previous versions disables telnet which can be reversed only by enabling telnet manually via ssh)
- rar file now contains an extractor/registration program which will extract the actual toolkit (bmt.exe). If toolkit is not yet registered, a registration dialog box must be filled-up before bmt.exe is extracted. After extraction, you can run the toolkit by launching bmt.exe. You can make a shortcut for it if you want but do not rename bmt.exe, it will not run if you do.


updates 2.10.01:
-bug-fix on old series mac change (wimax userid/password not saved after reboot). However, to make old series mac changes permanent, reboot modem and do not close tool until reboot is finished and current settings are refreshed.
-step = 1 now interprets to: +2 for old series mac (previously +1 only); +4 to new series mac (previously +4 also)


updates 2.10:
-bug-fix on sniper hang after mac change
-"use base mac list" method can now also be continued on next sniping session
-base mac list is automatically sorted in the notepad itself after a sniping session. Indexes are also shown.
-new "pass" and "index" counters for monitoring position in the list of current-base-mac under test.


updates 2.09.01-02:
-removed unnecessary gemtek frequency range command with syntax error which causes errors in dv235t
-bug-fixes for wimax password generation
-bug-fixes for sniping time display


updates 2.09:
-multiple base macs per sniping session (old and new series macs can mix in one sniping session!)
-sniping sessions are saved. Click on [snipe 1 & stay] or [snipe all] to continue the previous session.
Click [new session] button to re-start session from beginning of list or when you wan to enter a new list.
-new [clean-up] button to sort and remove duplicates from the selected mac history file.
-the initial tab displayed is the sniping tab which is the one frequently used.


run the program. This is the initial screen:
http://www.4shared.com/download/vox2zahjba/checking_equipment.png?


after a split-second, if modem is detected:
http://www.4shared.com/download/kj-yeq_jce/reading_current_settings.png


if everything is fine, you will be directed to the mac sniper/tester tab (which is more frequently used) and this is what you'll see:
http://www.4shared.com/download/47c0iyujce/sniper_tab_new_01.png


if you click on the mac changer tab, the display will look something like this:
http://www.4shared.com/download/4mdlncu-ba/mac_changer_tab_new_01.png


other scenarios during startup:

1. Modem inaccessible
http://www.4shared.com/download/sqwm6g8kce/modem_not_ready.png
possible reasons:
1.wrong wimax model
2.modem is not yet finished booting up
3.there is problem with the lan cable connection (local area connection was automatically checked already)
4. Ip address is different from program setting

what can be done?
1. Replace modem with allowed models (bm622m/bm623m/dv235t-for-globe only)
2. Wait for the modem to finish the boot up process (bottom signal-led blinking) before clicking [yes] again.
3. Check your lan cable and that local area connection is not disabled
4. To change programs default ip, click [no] and follow the screenshots below:

4a. Click [set default ip] button
http://www.4shared.com/download/znscrmggce/change_default_ip_01.png


4b. Change ip to the modem's correct ip address (sorry for the label "router ip", i will change that later). Then click [save & check] button
http://www.4shared.com/download/yaswtjl3ba/change_default_ip_02.png


4c. If modem is still inaccesible, you will see this. However, the ip you entered will still be saved for the program to use
http://www.4shared.com/download/9ci0qdwqce/change_default_ip_03.png

4d. If new ip is correct and modem is accesible, you will see this:
http://www.4shared.com/download/x11zkk_-ba/router_ip_check_ok.png

click [close] button and modem current settings will be checked again.


2. Modem ssh cannot be launched
http://www.4shared.com/download/cl9euapmce/ssh_failed.png
possible reasons:
1.modem's ssh server is not enabled
2.modem is not bm622m model but one different with the same default ip address.

what can be done?
1. If firmware version is 2012, click yes to enable ssh automatically
2. If firmware version is not 2012 (or other models like 623m), click [no] and enable the ssh manually (please refer to other tutorials how to do this)
3. Click [no], replace modem with appropriate one, click [repair lan] then click [refresh] button afterwards.



using the sniper
http://www.4shared.com/download/fg9ls9kwce/using_the_sniper_01.png

http://www.4shared.com/download/8wweypixba/using_the_sniper_02.png
* note: Macs can be entered with or without colons ( : ); other non-hex characters and white-spaces are ignored; only the first 12-hex-characters of the line is read and validated.


for example:
if you enter these values in maclist.txt (base mac list file) at ang inilagay nyo sa step is 1:

34cdbebd6c88 <-- new series
34cdbebd6c7c <-- new series
e8:cd:2d:bf:96:a8 <-- new series
04:c0:6f:03:28:3c <-- old series
34:cd:be:bd:6c:7c <-- new series (duplicate na ito ng 2nd mac)

(note: Sinadya ko lagyan ng duplicate mac)

2. Ang unang gagawin ng tool before sniping is sort the list at iremove ang duplicates, ito rin ang itetest ng sniper sa 1st pass:

04:c0:6f:03:28:3c
34:cd:be:bd:6c:7c
34:cd:be:bd:6c:88
e8:cd:2d:bf:96:a8

3. 2nd pass, eto na ang matetest na macs

04:c0:6f:03:28:3e <-- +2 dahil old series mac
34:cd:be:bd:6c:80 <-- +4 dahil new series mac
34:cd:be:bd:6c:8c <-- +4 dahil new series mac
e8:cd:2d:bf:96:ac <-- +4 dahil new series mac

4. 3nd pass, eto na ang matetest na macs

04:c0:6f:03:28:40 <-- +2 dahil old series mac
34:cd:be:bd:6c:84 <-- +4 dahil new series mac
34:cd:be:bd:6c:90 <-- +4 dahil new series mac
e8:cd:2d:bf:96:b0 <-- +4 dahil new series mac

5. 4th pass, eto na ang matetest na macs

04:c0:6f:03:28:42 <-- +2 dahil old series mac
..................................<-- hindi na itetest ang series na to dahil nag-abot na sa 3rd base mac (34:cd:be:bd:6c:88)
34:cd:be:bd:6c:94 <-- +4 dahil new series mac
e8:cd:2d:bf:96:b4 <-- +4 dahil new series mac

6. 5th pass, eto na ang matetest na macs

04:c0:6f:03:28:44 <-- +2 dahil old series mac
34:cd:be:bd:6c:98 <-- +4 dahil new series mac
e8:cd:2d:bf:96:b8 <-- +4 dahil new series mac

and so on


pero kung ang ginawa nyong step is 2:

1. 1st pass:

04:c0:6f:03:28:3c
34:cd:be:bd:6c:7c
34:cd:be:bd:6c:88
e8:cd:2d:bf:96:a8

2. 2nd pass, eto na ang matetest na macs

04:c0:6f:03:28:40 <-- +4 dahil old series mac
34:cd:be:bd:6c:84 <-- +8 dahil new series mac
34:cd:be:bd:6c:90 <-- +8 dahil new series mac
e8:cd:2d:bf:96:b0 <-- +8 dahil new series mac

3. 3nd pass, eto na ang matetest na macs

04:c0:6f:03:28:44 <-- +4 dahil old series mac
...................................<-- hindi na itetest ang series na to dahil nag-abot na sa 3rd base mac (34:cd:be:bd:6c:88)
34:cd:be:bd:6c:98 <-- +8 dahil new series mac
e8:cd:2d:bf:96:b8 <-- +8 dahil new series mac


4. 4th pass, eto na ang matetest na macs

04:c0:6f:03:28:48 <-- +4 dahil old series mac
34:cd:be:bd:6c:a0 <-- +8 dahil new series mac
e8:cd:2d:bf:96:c0 <-- +8 dahil new series mac

and so on


http://www.4shared.com/download/fjtoh-0cba/using_the_sniper_03.png

http://www.4shared.com/download/4ykrneveba/using_the_sniper_04.png

http://www.4shared.com/download/enx36lv5ce/using_the_sniper_05.png

http://www.4shared.com/download/azvdscffce/pass_and_index__1_.png

new in version 2.10.03
http://www.4shared.com/download/mjzjxpyoce/new_series_edit.png

just input new series prefix (1st four hex digits only). One series per line then save the file. The series below will automatically show the next time you edit the list plus the new ones that you added...
http://www.4shared.com/download/zxb-65vxba/new_series_mac_prefixes.png

to be continued....


please dito lang po sa thread mag-post ng tanong tungkol sa guide. Wag nyo po ako i-pm or i-text dahil busy po ako nowadays. Explore-explore lang and some common sense...

boss, link naman pra mkpgdownlod ng toolkit..thnx

 

[Permanent BAN]

@bosslava

boss alam muna to?

http://www.symbianize.com/showthread.php?t=1159653

sana ma add to sa features ng tool mu


Sample

001E104E0B87

[email protected]
[email protected]
wimaxb87

Alam na ni boss lava yan.

 

[joeven04]

sir anu po tong error na toh??
8868

 

[boolsom]

Re: BM622m 2012 Mac Changer [Simplest!]

salamat boss

bakit po error sakin??

 

[chenchen27]

Re: BM622m Toolkit v2.04.04.02 (NO REBOOT MAC CHANGE/SNIPIN

Sir lava salamat po aayusin ko maselan po pala ang tools nyo .... feedback ako or txt pag ok na.. maraming salamat talaga sa time mo... sana wag ka magalit saken salamat

 

[lavaboy]

Re: BM622m Toolkit v2.04.04.02 (NO REBOOT MAC CHANGE/SNIPIN

konting tiis lang po... may sudden change sa career natin. have to make adjustments... babalikan ko ang tool natin after i settled all these mess.

 

[markymondie]

Re: BM622m Toolkit v2.04.04.02 (NO REBOOT MAC CHANGE/SNIPIN

take your time bro..

wait ko nalang sniper pang dv... so far so good naman BM622m Toolkit V2.10.03

almost perfect na

 

[karaude]

Kelan kaya magkakaroon ng pang Window 8.1 64 bit support to? Karamihan kasi ngayon matataas na specs na kaya mataas OS nag nilalagay