CISCO Networking Discussions

[ackidcat]

sir.. balak ko po sana mag aral neto kaso d ako fast learner.. gs2 ko sana d bootcamp.. may mga nka try naba mag aral sa Meralco foundation d2? balak ko sana mag enroll dun next year eh.. pero kung may suggest kyo na magandang school.. yun pde sana sched ko working n po kasi ako e

 

[nOosadz]

sir.. balak ko po sana mag aral neto kaso d ako fast learner.. gs2 ko sana d bootcamp.. may mga nka try naba mag aral sa Meralco foundation d2? balak ko sana mag enroll dun next year eh.. pero kung may suggest kyo na magandang school.. yun pde sana sched ko working n po kasi ako e

Anyway, if you want slowtrack bootcamp para di ka ma-overload sa topics and since you mention you're not fast learner. Maybe, you could try sa CNCTC. Search mo sa google website nila CNCTC. May slowtrack bootcamp sila for CCNA,. try check it out.

 

[jakeraider]

pasali po ako malaking help po ito

 

[nOosadz]

pasali po ako malaking help po ito

You're welcome po.

 

[justasking]

tanong ulit.

Paano mag lagay ng IP add sa mga printers at cctv? Though command line din ba un? More on configurations pa lang kasi ang alam ko sa ngayon pero gusto ko din matuto sa mga real world stuffs.

 

[nOosadz]

tanong ulit.

Paano mag lagay ng IP add sa mga printers at cctv? Though command line din ba un? More on configurations pa lang kasi ang alam ko sa ngayon pero gusto ko din matuto sa mga real world stuffs.

Actually IP camera is what I mean kung gusto mo e access outside network. Lagyan mo lang Static NAT yung local IP address ng IP CAM along with the port 80 and you may view your internet IP cam outside the premises. sa CCTV not yet experienced pa, kasi may mga browser issues ang CCTV eh, sa printer naman, mostly locally lang nakaka access nyan.

 

[justasking]

Ung sa printer kahit local sa command line pa rin ba un? Saka may VLSM ba sa company niyo? Nagbabasa pa lang ako ng IPv6 medyo dumudugo na ung utak ko

 

[nOosadz]

Ung sa printer kahit local sa command line pa rin ba un? Saka may VLSM ba sa company niyo? Nagbabasa pa lang ako ng IPv6 medyo dumudugo na ung utak ko

Yung sa printer kahit sa Operating system pwede mo naman gawing Network Printer yun, depende din kasi sa klase ng printer. Kung accessible sa most employees, gagamit ka na lang ng network printer, yung e aassign lang na IP address. Wala kami VLSM dito sa company, naka class A private addresses pipili lang kami sa isang subnet noon. Uu kailangan more focus IPV6 kahit ako nakalimutan ko na yan, rereview ko ulit yan. hehe

 

[chot07]

hello po! ahm, ask lang po, may Cisco DPC2100R3 po ako, and yung ISP ko, cable + internet na, and problem ko po is hindi ako makapag online games, closed halos lahat ng ports na needed for online gaming, and I tried to go to modems configuration pero hindi ako makapasok walang nalabas na admin log in, every time na nilalagay ko yung default gateway sa browser, laging too long to respond, ano po ba ang dapat kong gawin, sana may makatuling sakin, salamat

 

[justasking]

Tanong ulit.

Ung pag configure ba ng multicast at unicast sa switch ay CCNA level pa rin or higher na? Gusto ko kasi mag focus muna sa CCNA level muna.

 

[-Icarus]

Maganda tong discussion na to, pa join ako dito TS.

 

[chot07]

hello po! Ahm, ask lang po, may cisco dpc2100r3 po ako, and yung isp ko, cable + internet na, and problem ko po is hindi ako makapag online games, closed halos lahat ng ports na needed for online gaming, and i tried to go to modems configuration pero hindi ako makapasok walang nalabas na admin log in, every time na nilalagay ko yung default gateway sa browser, laging too long to respond, ano po ba ang dapat kong gawin, sana may makatuling sakin, salamat

up ko lang po sana may makatulong

 

[reaper08]

hello po! ahm, ask lang po, may Cisco DPC2100R3 po ako, and yung ISP ko, cable + internet na, and problem ko po is hindi ako makapag online games, closed halos lahat ng ports na needed for online gaming, and I tried to go to modems configuration pero hindi ako makapasok walang nalabas na admin log in, every time na nilalagay ko yung default gateway sa browser, laging too long to respond, ano po ba ang dapat kong gawin, sana may makatuling sakin, salamat

up ko lang po sana may makatulong

Pdaan muna..

Sure kbng tama ung default gateway n tntype mo s browser.? To make sure..

open > Cmd
Type: ipconfig
a list of numbers should come up. After that, open up your web browser. Look for the number that comes after "Default Gateway"

Enter that into your web browser. It will take you to a page that might ask for a password. Try "admin"

From there you go to basic settings and there should be spots for you to add ports acceptations.

Add them then "apply" or "save" the settings.

After that it will ask you to reboot for the changes to be saved. Do that and you should be good to go man. Make sure you allow the ports through your firewall too.

Good Luck.

From: Fixya

 

[nOosadz]

Tanong ulit.

Ung pag configure ba ng multicast at unicast sa switch ay CCNA level pa rin or higher na? Gusto ko kasi mag focus muna sa CCNA level muna.

More IP Multicasting topics on CCIE Level na..

Maganda tong discussion na to, pa join ako dito TS.

Welcome po

 

[chot07]

Pdaan muna..

Sure kbng tama ung default gateway n tntype mo s browser.? To make sure..

open > Cmd
Type: ipconfig
a list of numbers should come up. After that, open up your web browser. Look for the number that comes after "Default Gateway"

Enter that into your web browser. It will take you to a page that might ask for a password. Try "admin"

From there you go to basic settings and there should be spots for you to add ports acceptations.

Add them then "apply" or "save" the settings.

After that it will ask you to reboot for the changes to be saved. Do that and you should be good to go man. Make sure you allow the ports through your firewall too.

Good Luck.

From: Fixya

ito po yung screenshot, tama naman yung gateway na nilalagay ko, pero ganyan ang nalabas View attachment 146039

pero kapag 192.168.100.1, ganito lang ang nalabas, walang tab for configuration ng modem, wala ding log in page View attachment 146040

 

[nOosadz]

ito po yung screenshot, tama naman yung gateway na nilalagay ko, pero ganyan ang nalabas View attachment 847420

pero kapag 192.168.100.1, ganito lang ang nalabas, walang tab for configuration ng modem, wala ding log in page View attachment 847421

Naka Static Configured ka ba na IP address? Try mo nga muna e set into DHCP yung TCP/IP Properties then punta ka ulit command prompt then execute "ipconfig /all", post screenshot the IP address details. Thanks!

 

[justasking]

More IP Multicasting topics on CCIE Level na..

Ok thanks. Akala ko CCNA level din yun

 

[chot07]

Naka Static Configured ka ba na IP address? Try mo nga muna e set into DHCP yung TCP/IP Properties then punta ka ulit command prompt then execute "ipconfig /all", post screenshot the IP address details. Thanks!

hindi naman ako nakastatic, DCHP enabled naman ako, ito po yung screen shot View attachment 146043

 

[nOosadz]

hindi naman ako nakastatic, DCHP enabled naman ako, ito po yung screen shot View attachment 847452

Either try telnet the default gateway or access it thru web management:

On command prompt:

>telnet 10.31.48.1

Or access the address via web browser:

10.31.48.1

 

[chot07]

Either try telnet the default gateway or access it thru web management:

On command prompt:

>telnet 10.31.48.1

Or access the address via web browser:

10.31.48.1

View attachment 146044 gnyan po ang nalabas, kahit sa web browser ayaw din