Tutorial Corby ii (qwerty pad) firmware upgrade

[Jessiezdc]

FOLLOW LANG PO YUNG STEP. DI KAYO MAGKAKAPROBLEMA

1. DOWNLOAD ARABIC FIRMWARE
2. DOWNLOAD MULTI-LOADER
3. DOWNLOAD AND INSTALL SAMSUNG KIES

4. EXTRACT NYU UNG DINAWNLAOD NYUNG FIRMWARE
5. OPEN MULTI-LOADER
6. CHECK BRCM2133
CHECK FULLDOWNLOAD

6. BROWSE NYU YUNG INEXTRACT NYU KANINA
CLICK BOOT select BOOTFILE
CLICK Amss select apps_compressed.bin
CLICK Rsrc1 select Rsrc_S3850_Open_Arabic_Common_OJP.rc1
CLICK Rsrc2 select Rsrc2_S3850(Low).rc2
CLICK FACTORY FS select FactoryFs_S3850_Open_Arabic_Common_OJP.ffs
CLICK CSC select CSC_S3850_Open_Arabic_Common_OJP.csc
CLICK SHP APP select ShpApp.app
CLICK PFS select PFS_S3850_Open_Arabic_Common_OJP_JPKK2.pfs
AND THE REST LEAVE IT BLANK

7. THEN CLICK PORT SEARCH
8. CLICK DOWNLOAD
WAIT TO FINISH DOWNLOADING THEN YOUR CELLPHONE MUST AUTO RESTART.


THEN CHANGE UR PHONE FROM KOR
1. ON KEYPAD TYPE *#5239870*#

2. Select Pre-configuration
3. Enter *#27236*#
4. Select JED and press Install
5. Phone will restart

CONGRATS QWERTY PAD KANA!

 

[roxjhun]

panu po ba malalaman ung kung anung frimware ung iyong phone?

 

[yhew18]

100% gumagana po ba toh ?
baka namn po my side effect pag ginawa or baka pg ngkamali k ng gawa masira ung cp ntn ??

 

[Jessiezdc]

panu po ba malalaman ung kung anung frimware ung iyong phone?

Di ko po alam.. Pero pagnag upgrade ka ng Firmware
mas maayos na yung keypad mo kasi yung nextline button nasa kanan na. and space nasa baba

100% gumagana po ba toh ?
baka namn po my side effect pag ginawa or baka pg ngkamali k ng gawa masira ung cp ntn ??

100% bro.
kapag nagkamali ka pwede mo xa i-Flash mo ulit..

 

[mhonzy]

boss,iisa lng b lahat ng firmware ng corby 2. .?naiibabalik pa ba sa keypad ung qwerty?

 

[napsterkent]

100% Functioning..!!
Thanks Bro.!!

 

[Jessiezdc]

boss,iisa lng b lahat ng firmware ng corby 2. .?naiibabalik pa ba sa keypad ung qwerty?

Hindi po iba-iba ang klase ng firmware..
may asian, arabic euro..
yan po nasa tutorial ko Arabic pero pwede mo xang gawin english

100% Functioning..!!
Thanks Bro.!!

No problem..

 

[walalng021]

ts bat serial port error po?

 

[Jessiezdc]

ts bat serial port error po?

naka install na po ba yung Samsung Kies?
then Off mo po yung Cp mo..
Hold Volume down + Dial + Power button then sasakmo na po yung usb cord to cpu

 

[walalng021]

try ko po ulet wait po

 

[walalng021]

ts wait ko po ba matapos ung connecting sa kies bago ko sya download sa multiloader?

 

[Jh3ss]

hindi kaya mag kaproblema to kase nng extract ko ung file nag ka error sya crc failed ata ung pero naextract namn sya at completo namn ung files... okay lang ba yun...

 

[khenet012]

panu po ibabalik s dati ung firmware ng corby II?

 

[Jessiezdc]

ts wait ko po ba matapos ung connecting sa kies bago ko sya download sa multiloader?

OPO KASI YUNG SAMSUNG KIES PO YUNG PINAKA DRIVER NG cELLPHONE MO PARA BASAHIN XA NG COMPUTER,
KAPAG WALANG SAMSUNG KIES DI SYA BABASAHIN NG COMPUTER..

hindi kaya mag kaproblema to kase nng extract ko ung file nag ka error sya crc failed ata ung pero naextract namn sya at completo namn ung files... okay lang ba yun...

OK LANG PO YUN. AS LONG COMPLETE YUNG No. NG FILES.
IF MY PROBLEM REPEAT NYU LANG SIMULA UMPISA

 

[brrucey]

sir bat pag click ko sa port search walang nangyayari. hindi nacclick yung DOwnload. na install ko na yung kies. naka connect yung cp ko saka naginstall device din.. ano kaya problema?

 

[brrucey]

nakalgay sa screen ng cp "Connected" press end key to quit samsung kies" ibig sabihin nareread sya dba? pero ayaw gumana pag click port search. hays..

 

[Jessiezdc]

sir bat pag click ko sa port search walang nangyayari. hindi nacclick yung DOwnload. na install ko na yung kies. naka connect yung cp ko saka naginstall device din.. ano kaya problema?

nakalgay sa screen ng cp "Connected" press end key to quit samsung kies" ibig sabihin nareread sya dba? pero ayaw gumana pag click port search. hays..

KAPAG PO
"Connected" press end key to quit samsung kies"
di po xa na-bootable mode..

OFF mo muna yung CP then HOLD
volume down + dial button + power button..

tapos may lalabas na icon sa Cp mo na arrow down sa Cp.
LIKE THIS
\/
\/

 

[brrucey]

nagawa ko na din po yung bootable mode. pero di pa rin sya ma detect ng samsung kies. baka sa usb na gamit ko yung problema

 

[Jessiezdc]

nagawa ko na din po yung bootable mode. Pero di pa rin sya ma detect ng samsung kies. Baka sa usb na gamit ko yung problema

baka nga po.. Kasi dapat mababasa xa ng samsung kies..

 

[fookie28]

KAPAG PO
"Connected" press end key to quit samsung kies"
di po xa na-bootable mode..

OFF mo muna yung CP then HOLD
volume down + dial button + power button..

tapos may lalabas na icon sa Cp mo na arrow down sa Cp.
LIKE THIS
\/
\/

pagkatapos po nyan ano n pong gagawin?