Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

Expert laptop technician room pasok

sensya na sir di ko kabisado eh. dapat buksan mo muna dapat same sila ng socket papuntang lcd to board yung parang vga sa desktop na sinasaksak from monitor to video card ganun din yan mas maliit nga lang at iba iba ang design pag parehas yan shoot yan boss malalaman mo naman kung gagana o hindi. pag same model halos parehas lang takbo ng voltage nyan . kung di ka sure pede mo padala sa akin sagot mo lang shipping.

OK tanx sir, magkaiba ng socket, pero di kaya pwedeng yung pinaka board lang, kasi napansin ko sa mga tutorial natatangal yung pinaka socket na yun papuntang lcd... Anyway sir salamat sa mga sagot... :-)
 
OK tanx sir, magkaiba ng socket, pero di kaya pwedeng yung pinaka board lang, kasi napansin ko sa mga tutorial natatangal yung pinaka socket na yun papuntang lcd... Anyway sir salamat sa mga sagot... :-)

salamat naman at nakatulong ako kahit konti. anyways yung socket kase design sa board yan malabo mong alisin yan dahil may mga designated pins yan. kung anu yung nasa board yun na talaga yan kaya kung hahanap ka lcd dapat parehas po sa board ninyo yung ikakabit

- - - Updated - - -


puntahan mo na lang yung binigay kong link.. pag ayaw pa din pa remote mo na lang sa akin para makita ko problema. download mo na lang yung bagong driver tapos download ka rin ng camdiag para makita mo kung naka install yung camera mo at walang problema sa mga port ng usb na pinag kabitan.
 
yung nga po sir, di po sya detected sa bios or device manager, di ba dapat mag shoshow sya dun para mainstallan ko ng driver. Mukang hardware problem na tong akin. bukas itratry kong buksan tignan ko kung may problema sa connections or ports. salamat po sa reply sir. feedback nalang ulit ako tom
 
up ko lang sa mga ka sb ko kaka bored walang gawa tulong na lang muna sa mga nangangailangan :)
 
Sir, meron sana akong gusto ihingi ng advice dito sa acer netbook ng client ko. kasi ang issue nito eh no display ang screen. naka dual boot sya sa linux at windows 7. may display sya sa linux, pero walang display sa windows. format is out of the question kasi for sure hindi ito software issue. to get a better picture of the problem, wala syang display sa bios nor sa boot menu. nka auto boot sya sa linux before windows so hindi rin siguro lcd. pag kinabit mo sya sa desktop monitor, may display sya, pero ang itsura eh parang lcd ng laptop na walang backlight sa dilim. I dunno kung reballing na ang kelangan dito para tumino yung picture nya.

mga hardware experts dyan, patulong naman po. 3rd post ko na ng question na ito pero mukhang hindi napapansin sa mga thread na un. I hope this won't go another question un-noticed.
 
Laptop brand:SAMSUNG Model:N100
Problem:HINDI MAGREAD NG USB PERO DETECTED ANG BLUETOOTH DEVICE
Diagnostic:THE USB HAS NOT RECOGNIZE Solution:=
 
Sir, meron sana akong gusto ihingi ng advice dito sa acer netbook ng client ko. kasi ang issue nito eh no display ang screen. naka dual boot sya sa linux at windows 7. may display sya sa linux, pero walang display sa windows. format is out of the question kasi for sure hindi ito software issue. to get a better picture of the problem, wala syang display sa bios nor sa boot menu. nka auto boot sya sa linux before windows so hindi rin siguro lcd. pag kinabit mo sya sa desktop monitor, may display sya, pero ang itsura eh parang lcd ng laptop na walang backlight sa dilim. I dunno kung reballing na ang kelangan dito para tumino yung picture nya.

mga hardware experts dyan, patulong naman po. 3rd post ko na ng question na ito pero mukhang hindi napapansin sa mga thread na un. I hope this won't go another question un-noticed.


gud pm sir... need ko po sana makita yung actual pede po ba pa ss?. may tools po kase ang mga manufacturer para ma test ang vga card natin, dun natin malalaman yan kung video card talaga i step by step natin sir i guide ko kayo. try nyo po hingi ng support sa acer or pag may time ako mamaya hanapan kita test muna natin bago tayo pumunta sa next step ok.

View attachment 149114
View attachment 149115

-core failure
Core failure can manifest itself in various ways.

Display symptoms:
Ghosted text, random symbols, lines or fuzziness upon boot
One DVI port faulty
Obstructive lines similar to that of VRAM failure (but usually other more defined symptoms are also present)
Other symptoms:
Lack of fan control where fan control was previously existant
Card is detected as "Unknown VGA device", having code 39 errors, or remaining completely undetected

Multiple symptoms are often displayed.

View attachment 149116
vram failure -Unlike core failure, VRAM failure will cause random, regular patterns of corrupt symbols, pixels and small lines. Highly common and most often easily repairable. Can also result in Code 39 errors, not being able to install driver, not being able to boot into windows etc etc.

Alternatively, bad RAM, incorrect RAM timings or low CPUNB voltage can cause random symbols.

View attachment 149117
line of death -Most common on the GeForce 8 series. I have had 2 cards and 2 laptop boards through here exhibiting these symptoms and no amount of reflowing directed at each specific area of the card fixed it. There is a known problem with G84/G86 chips used in many laptops which will cause this. It wouldn't surprise me if the whole 8 series was affected.

If you are facing this issue, the card is most likely toast, if the trick DOES work it won't last very long. If there are horizontal splits through the lines, it is a whole different problem (see repeated, regular patterns of artifacts)

Which area of the card is responsible? Damaged smaller components behind or near to the VRAM can cause this on any card. Aside from that, no clue, suspect core as per the above article. Very rarely, the NVIVO chip is at fault.
View attachment 149118
These artifacts can be caused by:
Game incompatibility
Core problems
DirectX or driver problems
And can look the same in each case. Firstly, perform a clean driver install and update DirectX if possible. If problems persist, try other games. If all games do it, it's probably an issue with the card, especially if BSoDs occur: usually I'd just reflow but you could try reformat and clean reinstall if you're really certain it's softwareside

Code 39/crapping out during driver installation



Classic sign of card failure, especially if you are recieving artifacts upon POST. Upon attempting to install the Nvidia drivers, you may recieve a "Device cannot be found/system incompatible" error. Try the usual reseating, reinstalling drivers. The card may also show as "Unknown device" or "Generic VGA adaptor".

Which area of the card is responsible? Core or VRAM, I have seen this problem caused by both.



Blue Screen of Death - 0x116, 0x8E and others

Bluescreens targeted at the nvidia driver will often point to nv4_disp, nv4_mini and nvlkkdm. This can be caused by just about anything (even flash player).

sir isa ba dyan yung display nyo? para ma laman ko agad kung anu problem.


kapag core failure maaring nag ooverheat lang po yan ang recommendation ko paki check yung temperature sa bios nya pede rin kaseng tuyo na yung thermal paste nya kaya ganyan na yung output mabilis mag overheat.
pede ring mahina na takbo ng fan mo hawakan mo kung nag iinit sa ilalim.

kapag vram failure naman sir try mo palit ng ibang memory baka nag co-conflict lang yan

kapag death of lines naman check mo kung hindi built in yung video slot nya paki linisan lang lahat saka mo balik yung card

tutal kalas na hiram ka malaking lente tignan mo yung video chips tignan mo kung may kulang sa helera nya pag meron saka nyo po pa reball.



sana po naka tulong ako sa inyo kahit idea.

- - - Updated - - -

Laptop brand:SAMSUNG Model:N100
Problem:HINDI MAGREAD NG USB PERO DETECTED ANG BLUETOOTH DEVICE
Diagnostic:THE USB HAS NOT RECOGNIZE Solution:=

This issue can be caused if any of the following situations exist:
The currently loaded USB driver has become unstable or corrupt
Your PC requires an update for issues that may conflict with a USB external hard drive and Windows
Windows may be missing other important updates hardware or software issues
Your USB controllers may have become unstable or corrupt
Your external drive may be entering selective suspend
Your PC motherboard may need updated drivers

sir hanap ka ng driver robot dito sa mga ka sb natin update mo lang pati os updates magiging ok na yan. try mo hanapin sa microsoft updates.


sana nakatulong
 

Attachments

  • core failure.png
    core failure.png
    108.6 KB · Views: 1
  • core failure2.png
    core failure2.png
    195.7 KB · Views: 1
  • vram failure.jpg
    vram failure.jpg
    70.4 KB · Views: 1
  • lines of death.png
    lines of death.png
    284.9 KB · Views: 1
  • direct x issue.jpg
    direct x issue.jpg
    44.6 KB · Views: 0
sir gud am ask ko lang yung laptop ko kasi my power pero walang display after mag ka ganun eh running condition naman sya kaka repormat ko nga lang po eh . wala na po akong battery at yung adaptor ko hindi na rin yung original.. anu po kayang paraan ang pwede kong gawin ...


at isa pa meron po ba kayung di video card ng laptop na pang asus di tangal kasi yung isa kong video card .. at saan po yung place ng shop nyo sir .. salamat ..
 
sir gud am ask ko lang yung laptop ko kasi my power pero walang display after mag ka ganun eh running condition naman sya kaka repormat ko nga lang po eh . wala na po akong battery at yung adaptor ko hindi na rin yung original.. anu po kayang paraan ang pwede kong gawin ...


at isa pa meron po ba kayung di video card ng laptop na pang asus di tangal kasi yung isa kong video card .. at saan po yung place ng shop nyo sir .. salamat ..

good am din po sir. yung power adaptor mo ba matagal mo na gamit bago nawalan ng display? kahit wala kang battery ok lang po yan as long na ok ang power adaptor mo at parehas ang voltage output nya.

1. tsek mo muna pag power mo kung umaandar ang exhaust fan at hindi namamatay. - ibig sabihin hindi vga card yan pedeng inverter ng lcd monitor or lcd mismo
2. try mo alisin ang dvdrom, harddisk, wifi card etc. tapos replace ka ng ibang memory nakapasok ka sa bios ibig sabihin isa sa component lang ang problem
3. pag wala pa din pede sa video card na po yan pag power lang at nag off ang laptop mo after mo i on.

wala po ako extra video card nag start pa lang ako sa shop ko kaya namimili muna ako mga sirang laptop na kaya ko sa presyo.
dati kase ok lang kase sa company ako sawa sa stocks ng pampalit kaya order based na lang po ako ngayun sir.


malabon po area ko at dito lang ako gumagawa sa bahay



sana po naka tulong. basa ka lang backthread andun ibang question at answer para di pa ulit ulit sagot ko kapatid.
 
sir pag on ko po ok naman po yung fan hindi namamatay .. opo nagamit ko pa yung adapter bago mag kaganito .. wala kasi akong ibang adapter na sukat dito kaya hindi ko ma try ng ibang adapter eh ... kung lcd naman or inverter eh dapat my display ang kaso walang display or light yung lcd nya eh .. tsk tsk ... alam ko kulang sa amper yung adaptor ko dun sa laptop pero gumagana naman sya before mag ka ganun eh
 
sir pag on ko po ok naman po yung fan hindi namamatay .. opo nagamit ko pa yung adapter bago mag kaganito .. wala kasi akong ibang adapter na sukat dito kaya hindi ko ma try ng ibang adapter eh ... kung lcd naman or inverter eh dapat my display ang kaso walang display or light yung lcd nya eh .. tsk tsk ... alam ko kulang sa amper yung adaptor ko dun sa laptop pero gumagana naman sya before mag ka ganun eh


kaya nga po walang display kase pedeng isa sa sinabi ko ang problem. much better po kung mabigyan nyo ako ng ss ng status pagka on or video para mas ma guide kita sir.
 
gud pm sir... need ko po sana makita yung actual pede po ba pa ss?. may tools po kase ang mga manufacturer para ma test ang vga card natin, dun natin malalaman yan kung video card talaga i step by step natin sir i guide ko kayo. try nyo po hingi ng support sa acer or pag may time ako mamaya hanapan kita test muna natin bago tayo pumunta sa next step ok.

View attachment 859029
View attachment 859030

-core failure
Core failure can manifest itself in various ways.

Display symptoms:
Ghosted text, random symbols, lines or fuzziness upon boot
One DVI port faulty
Obstructive lines similar to that of VRAM failure (but usually other more defined symptoms are also present)
Other symptoms:
Lack of fan control where fan control was previously existant
Card is detected as "Unknown VGA device", having code 39 errors, or remaining completely undetected

Multiple symptoms are often displayed.

View attachment 859031
vram failure -Unlike core failure, VRAM failure will cause random, regular patterns of corrupt symbols, pixels and small lines. Highly common and most often easily repairable. Can also result in Code 39 errors, not being able to install driver, not being able to boot into windows etc etc.

Alternatively, bad RAM, incorrect RAM timings or low CPUNB voltage can cause random symbols.

View attachment 859032
line of death -Most common on the GeForce 8 series. I have had 2 cards and 2 laptop boards through here exhibiting these symptoms and no amount of reflowing directed at each specific area of the card fixed it. There is a known problem with G84/G86 chips used in many laptops which will cause this. It wouldn't surprise me if the whole 8 series was affected.

If you are facing this issue, the card is most likely toast, if the trick DOES work it won't last very long. If there are horizontal splits through the lines, it is a whole different problem (see repeated, regular patterns of artifacts)

Which area of the card is responsible? Damaged smaller components behind or near to the VRAM can cause this on any card. Aside from that, no clue, suspect core as per the above article. Very rarely, the NVIVO chip is at fault.
View attachment 859033
These artifacts can be caused by:
Game incompatibility
Core problems
DirectX or driver problems
And can look the same in each case. Firstly, perform a clean driver install and update DirectX if possible. If problems persist, try other games. If all games do it, it's probably an issue with the card, especially if BSoDs occur: usually I'd just reflow but you could try reformat and clean reinstall if you're really certain it's softwareside

Code 39/crapping out during driver installation



Classic sign of card failure, especially if you are recieving artifacts upon POST. Upon attempting to install the Nvidia drivers, you may recieve a "Device cannot be found/system incompatible" error. Try the usual reseating, reinstalling drivers. The card may also show as "Unknown device" or "Generic VGA adaptor".

Which area of the card is responsible? Core or VRAM, I have seen this problem caused by both.



Blue Screen of Death - 0x116, 0x8E and others

Bluescreens targeted at the nvidia driver will often point to nv4_disp, nv4_mini and nvlkkdm. This can be caused by just about anything (even flash player).

sir isa ba dyan yung display nyo? para ma laman ko agad kung anu problem.


kapag core failure maaring nag ooverheat lang po yan ang recommendation ko paki check yung temperature sa bios nya pede rin kaseng tuyo na yung thermal paste nya kaya ganyan na yung output mabilis mag overheat.
pede ring mahina na takbo ng fan mo hawakan mo kung nag iinit sa ilalim.

kapag vram failure naman sir try mo palit ng ibang memory baka nag co-conflict lang yan

kapag death of lines naman check mo kung hindi built in yung video slot nya paki linisan lang lahat saka mo balik yung card

tutal kalas na hiram ka malaking lente tignan mo yung video chips tignan mo kung may kulang sa helera nya pag meron saka nyo po pa reball.



sana po naka tulong ako sa inyo kahit idea.

- - - Updated - - -



This issue can be caused if any of the following situations exist:
The currently loaded USB driver has become unstable or corrupt
Your PC requires an update for issues that may conflict with a USB external hard drive and Windows
Windows may be missing other important updates hardware or software issues
Your USB controllers may have become unstable or corrupt
Your external drive may be entering selective suspend
Your PC motherboard may need updated drivers

sir hanap ka ng driver robot dito sa mga ka sb natin update mo lang pati os updates magiging ok na yan. try mo hanapin sa microsoft updates.


sana nakatulong

Salamat po sa pag sagot sa tanong ko Sir. :) although maraming naka-post na example problems na nka display, wala po dyan yung issue na nae-encounter ko. hindi po ako makapag screenshot ng screen nung acer kasi wala po akong cam at the moment, at hindi rin po makukunan ng screenshot dahil wala pong display na kahit ano. siguro po describe ko na lang po yung na-e-encounter ko from the moment na buksan ko yung unit.

Acer d255 po yung model nung unit na pinapagawa sa akin. here's a complete review about the unit para may idea din po kayo.

http://www.trustedreviews.com/Acer-Aspire-D255_Laptop_review_dual-booting-battery-life-value_Page-3

So after ko po pindutin yung power on, totally dark po yung screen ng laptop pero meron po syang activity dahil nagbi-blink po yung sa hard disk nya. after a while, lalabas po yung boot logo ng linux based os nya na may acer logo. then after nun, eto po yung screen na makikita nyo:

View attachment 149299

crystal clear po yung display nya at no defects whatsoever. pwede mag wifi, internet, games, etc. basta nsa loob ng linux interface nya. then after mo mag sawa kaka-explore, may button dyan kung gusto mo pumunta ng windows. after nun, mag black nanaman yung screen nya, pero you can hear the windows 7 startup sound after a few moments.

since wala po akong makita at meron naman akong desktop lcd monitor, kinabit ko dun sa vga port nya at meron po akong nakikita na madilim na imahe nung desktop na comparable sa laptop na nasira ung backlight. bukod dun eh hindi rin proportion yung screen nya dahil 1/4 lang ng upper left screen ang sakop nya pero kita mo yung buong desktop. kahit bagu-baguhin ko yung resolution, hindi naman nagre-resize ung display nya.

I have a video of the laptop a few weeks before it broke down to it's status today. san ko po pwede i-upload na hindi na kelangan ng account?

I hope the information is enough to troubleshoot from here. :)

Salamat po and more power to you sir!
 

Attachments

  • 14300-img7696s.jpg
    14300-img7696s.jpg
    17.5 KB · Views: 4
Last edited:
ok ito ah..share ko din mga na repair kong laptop
TOSHIBA A200,A300,L300,L505
PROBLEM AUTO SHUTDOWN OR PAG SINAKSAK YUNG AC ADAPTOR NAMAMATAY OR HANG
DIAGNOSE MOTHER BOARD PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED"

MSI CR400,EX400,EX465
PROBLEM NO DISPLAY OR SHUTDOWN
DIAGNOSE MOTHER BOARD PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED

HP QC20
PROBLEM AUTO SHUTDOWN
DIAGNOSE BOARD PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED"

ACER 4736Z KALGO,2920Z
PROBLEM AUTO SHUTDOWN
DIAGNOSE MOBO PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED"

SAMSUNG R430
PROBLEM NO DISPLAY
DIAGNOSE MOBO PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED

MSI EX465
PROBLEM NO POWER
DIAGNOSE DEAD BOARD
SOLUTION REPLACE POWER IC
"REPAIRED"

ACER ZG5
PROBLEM NO DISPLAY
BOARD PROBLEM
SOLUTION REFLASH BIOS
"REPAIRED

NEO BASIC
NO POWER
SOLUTION REPLACE POWER IC AND CAPASITOR
"REPAIRED
sana makatulong.. lahat yan puro sideline ko hehehehe yayaman boss ko kung sya lang makikinabang..pero di lahat ginagawa kong sideline pili lng lalo na pag mga dv series video problem an sira bumabalik eh..
 
ok ito ah..share ko din mga na repair kong laptop
TOSHIBA A200,A300,L300,L505
PROBLEM AUTO SHUTDOWN OR PAG SINAKSAK YUNG AC ADAPTOR NAMAMATAY OR HANG
DIAGNOSE MOTHER BOARD PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED"

MSI CR400,EX400,EX465
PROBLEM NO DISPLAY OR SHUTDOWN
DIAGNOSE MOTHER BOARD PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED

HP QC20
PROBLEM AUTO SHUTDOWN
DIAGNOSE BOARD PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED"

ACER 4736Z KALGO,2920Z
PROBLEM AUTO SHUTDOWN
DIAGNOSE MOBO PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED"

SAMSUNG R430
PROBLEM NO DISPLAY
DIAGNOSE MOBO PROBLEM
SOLUTION REPLACE CAPASITOR
"REPAIRED

MSI EX465
PROBLEM NO POWER
DIAGNOSE DEAD BOARD
SOLUTION REPLACE POWER IC
"REPAIRED"

ACER ZG5
PROBLEM NO DISPLAY
BOARD PROBLEM
SOLUTION REFLASH BIOS
"REPAIRED

NEO BASIC
NO POWER
SOLUTION REPLACE POWER IC AND CAPASITOR
"REPAIRED
sana makatulong.. lahat yan puro sideline ko hehehehe yayaman boss ko kung sya lang makikinabang..pero di lahat ginagawa kong sideline pili lng lalo na pag mga dv series video problem an sira bumabalik eh..

wow ok yan sir aisheteru02 keep it up .... di dapat talaga puro sa boss lang income. hehehehe tapos mas malaki kita nila dapat tayo din hehehehe sir tambay ka na lang dito para may kasama akong taga sagot sa mga ka sb natin na hingi ng advise pm me kung pede ka may sasabihin ako . thanks

- - - Updated - - -

Salamat po sa pag sagot sa tanong ko Sir. :) although maraming naka-post na example problems na nka display, wala po dyan yung issue na nae-encounter ko. hindi po ako makapag screenshot ng screen nung acer kasi wala po akong cam at the moment, at hindi rin po makukunan ng screenshot dahil wala pong display na kahit ano. siguro po describe ko na lang po yung na-e-encounter ko from the moment na buksan ko yung unit.

Acer d255 po yung model nung unit na pinapagawa sa akin. here's a complete review about the unit para may idea din po kayo.

http://www.trustedreviews.com/Acer-Aspire-D255_Laptop_review_dual-booting-battery-life-value_Page-3

So after ko po pindutin yung power on, totally dark po yung screen ng laptop pero meron po syang activity dahil nagbi-blink po yung sa hard disk nya. after a while, lalabas po yung boot logo ng linux based os nya na may acer logo. then after nun, eto po yung screen na makikita nyo:

View attachment 859548

crystal clear po yung display nya at no defects whatsoever. pwede mag wifi, internet, games, etc. basta nsa loob ng linux interface nya. then after mo mag sawa kaka-explore, may button dyan kung gusto mo pumunta ng windows. after nun, mag black nanaman yung screen nya, pero you can hear the windows 7 startup sound after a few moments.

since wala po akong makita at meron naman akong desktop lcd monitor, kinabit ko dun sa vga port nya at meron po akong nakikita na madilim na imahe nung desktop na comparable sa laptop na nasira ung backlight. bukod dun eh hindi rin proportion yung screen nya dahil 1/4 lang ng upper left screen ang sakop nya pero kita mo yung buong desktop. kahit bagu-baguhin ko yung resolution, hindi naman nagre-resize ung display nya.

I have a video of the laptop a few weeks before it broke down to it's status today. san ko po pwede i-upload na hindi na kelangan ng account?

I hope the information is enough to troubleshoot from here. :)

Salamat po and more power to you sir!

ok sir kung crystal clear sa linux yan at sa windows 7 lang ang problem ibig sabihin may conflict si linux kay microsoft yun ang nakikita ko. so kung ang una mong boot ay si linux at button switch lang kay microsoft under sya ni linux tama ba? try mo sir i update si linux using "Ext2Fsd" baka may bago ng release tagal na kase ako hindi nag linux eh fedora ang gamit ko parang na encounter ko na nga yan kapain na lang natin software problem lang naman yan.

thanks sa challenging question
 
Last edited:
dell inspiron 1545
Problem. ayaw mag start up. mag on lng ung power nya for 5 seconds tapos patay na ulit. pahelp nmn po.
 
- - - Updated - - -



ok sir kung crystal clear sa linux yan at sa windows 7 lang ang problem ibig sabihin may conflict si linux kay microsoft yun ang nakikita ko. so kung ang una mong boot ay si linux at button switch lang kay microsoft under sya ni linux tama ba? try mo sir i update si linux using "Ext2Fsd" baka may bago ng release tagal na kase ako hindi nag linux eh fedora ang gamit ko parang na encounter ko na nga yan kapain na lang natin software problem lang naman yan.

thanks sa challenging question

salamat muli po sa pag sagot sir. :) I dunno kung software po, kasi kahit bios po hindi ko makita eh. Ilagay po natin ung problem sa ganitong scenario sir... supposing ayaw na mag nung owner mag linux at bagong palit yung hard disk nya (which is un po ang gagawin ko ngayon), eh di wala pong os involved. anything I do eh no display sa lcd nung laptop, at super dim po sa external monitor. If I try to install windows, sa external monitor lang po ako naka-tingin, pero no display sa laptop. I can't conclude na lcd ang issue or inverter kasi malinaw naman ung display sa linux, or baka mababa lang ang demand ng linux sa display kaya meron syang naipapakita at mukhang walang problema. Ayaw na din sa linux nung may ari kaya I can't see how updating linux would do any good. I don't know if merong relevance eto, pero I can only assume na dahil un-even ang resolution ni linux kaya sya may display kaya pwede tapos ayaw nya sa traditional resolution ni windows kaya ayaw mag display.

I have a video ng laptop before sya masira para mas ma-analyze nyo ng mabuti ung problema. hindi ko lang po alam kung saan ako pwede mag upload ng video na hindi na kelangan gumawa ng account. I could email you the file kung gusto nyo po. :)
 
salamat muli po sa pag sagot sir. :) I dunno kung software po, kasi kahit bios po hindi ko makita eh. Ilagay po natin ung problem sa ganitong scenario sir... supposing ayaw na mag nung owner mag linux at bagong palit yung hard disk nya (which is un po ang gagawin ko ngayon), eh di wala pong os involved. anything I do eh no display sa lcd nung laptop, at super dim po sa external monitor. If I try to install windows, sa external monitor lang po ako naka-tingin, pero no display sa laptop. I can't conclude na lcd ang issue or inverter kasi malinaw naman ung display sa linux, or baka mababa lang ang demand ng linux sa display kaya meron syang naipapakita at mukhang walang problema. Ayaw na din sa linux nung may ari kaya I can't see how updating linux would do any good. I don't know if merong relevance eto, pero I can only assume na dahil un-even ang resolution ni linux kaya sya may display kaya pwede tapos ayaw nya sa traditional resolution ni windows kaya ayaw mag display.

I have a video ng laptop before sya masira para mas ma-analyze nyo ng mabuti ung problema. hindi ko lang po alam kung saan ako pwede mag upload ng video na hindi na kelangan gumawa ng account. I could email you the file kung gusto nyo po. :)


call ka na lang bro na pm ko na no. ko

- - - Updated - - -

dell inspiron 1545
Problem. ayaw mag start up. mag on lng ung power nya for 5 seconds tapos patay na ulit. pahelp nmn po.

boss basa lang backthread. possible videocard yan boss kagagawa ko lang ganya dell inspiron 1440 pag on mo seconds lang off na lahat pati fan. builtin ang video nyan change motherboard ka po. or pedeng power transistor/capacitor po check nyo na lang kung marunong po kayo gumamit ng tester.

- - - Updated - - -

para po sa mga sirang builtin video card ng laptop pede po ito pang replace para magamit nyo ulit at para din po sa mga laptop repairman..

http://www.youtube.com/watch?v=ktUw2VTFyX4

http://www.aliexpress.com/store/group/eGPU/706012_212103663.html

sana nakatulong
 
Last edited:
dell inspiron 1545
Problem. ayaw mag start up. mag on lng ung power nya for 5 seconds tapos patay na ulit. pahelp nmn po.

boss video card po yan problem na din po yan ng dell..di lng po hp khit anong brand po basta my dedicated video po sya..
 
Back
Top Bottom