Compiled posts. Para sa mga nagtatanong lagi.
Fix for inverted capacitive touch screen:
1. Extract ROM using ImageSuite (drag img file to extract_img.bat)
2. Inside image.img.dump folder, open COMMON _SYS_CONFIG100000 using Notepad++
3. Find ctp_para, edit ctp_revert_x_flag or ctp_revert_y_flag, 1 or 0 lang yung value, x for horizontal inverted, y for vertical inverted, both for completely inverted. Kung 0 yung value gawin mong 1, kung 1 yung value gawin mong 0
4. Open MagicISO, then open RFSFAT16_BOOTLOADER_00000
5. Copy script.bin and script0.bin to any convenient folder. Extract contents of ScriptUnscript.7z to the same folder.
6. Drag script.bin to unscript.bat, edit ctp_revert_x_flag and cto_revert_y_flag on script.bin (unscript.bat and bin2fex will create a file called sys_config1.fex, this is what you will edit) using Notepae++
7. Drag sys_config1.fex to script.exe to convert it to sys_config1.bin, then rename to script.bin.
NOTE: If any error is encountered, find and replace all instances of P? with power inside sys_config1.fex file before reconverting.
8. Repeat steps 6 and 7 for script0.bin (same NOTE applies)
9. Replace files in RFSFAT16_BOOTLOADER_00000 with edited ones
10. Save the image
11. Drag image.img.dump folder to repack_ics.bat inside ImageSuite folder
12. When finished, reflash your A13 tablet
13. Done
NOTE: Test your touch screen first. Kung lumala yung problem, baliktad yung pagka-edit mo sa ctp_revert_x_flag and cto_revert_y_flag.
ScriptUnscript.7z
http://www.mediafire.com/download.php?n8d1acsms9f4ptk
For MID-2330 single cam firmware, hanap nalang dito:
http://www.techknow.t0xic.nl/forum/index.php?topic=4499.0
Sensya na yan lang maitutulong ko.. Madaming combination kasi ng MID-2330 eh.. Iba-iba components bawat batch ng manufacturing.
How to make your camera work (insmod guide, applies to other components as well):
1. Enable ADB on tablet settings
2. Connect tablet to USB port, then open command prompt
3. Type adb devices to make sure your device is detected
4. If device is detected, type adb shell
5. Type cd /vendor/modules
6. Type ls
7. Take note of all the .ko files that you may need. List them down.
8. Type insmod <filename>.ko. Try them one by one until your camera/WiFi/G-sensor/touch screen works. If not, find the driver files on the internet (hassle work)
9. Pag gumana, take note of the camera driver that you loaded last. Install NovoTools then install CWM, use my previous posts
10. Reboot to recovery mode (CWM) using NovoTools.
11. Enter the following commands:
adb shell cat /dev/block/nandc > /sdcard/dump/boot.img
adb pull /sdcard/dump/boot.img c:/
12. Unpack boot.img in your C: using this guide:
http://www.freeyourandroid.com/guide/extract-edit-repack-boot-img-windows
13. Open the init.sun5i.rc file using Notepad++
14. Add this line to the drivers section:
insmod /vendor/modules/<filename>.ko
15. Repack boot.img using the guide.
16. Enter adb push c:/boot.img /sdcard/ to the command prompt.
17. Enter adb shell cat /sdcard/boot.img > /dev/block/nandc
For those having a problem installing CWM, here are the instructions:
1. Place recovery.img on the internal SD card (/sdcard, not /extsd)
2. Install NovoTools 1.0, then open NovoTools
3. Press Flash Recovery. Wait until "Flash Recovery" notification appears
4. To enter CWM, press Boot to Recovery
NOTE: The MID-2330-S has no physical back button, so you'll have to reset the tablet each time. Hassle, I know.
recovery.img and NovoTools 1.0:
http://www.mediafire.com/#wkb5caa7rw8yx
MID-2330-S Rev1 ROM with fixed camera (working):
http://www.mediafire.com/?qnw7e3hb21m3d
Mounting external SD card to /sdcard instead of /extsd, so apps will be installed on the external SD card:
Full na yung internal memory? As in /sdcard sa Root Explorer? Default setting ng Android yan eh. Ang problem kasi pag nasa SD card yung apps, minsan nawawala sa App Drawer yung icon nya unless i-restart mo yung tablet. But if you really wanna do it..
1. Open a file manager with ROOT access
2. Go to /etc
3. Edit vold.fstab with a text editor
4. Change:
dev_mount sdcard /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount extsd /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
to:
dev_mount extsd /mnt/sdcard auto /devices/virtual/block/nand1
dev_mount sdcard /mnt/extsd auto /devices/platform/sunxi-mmc.1/mm_host /devices/platform/sw_hcd_host0 /devices/platform/sw-ohci.1 /devices/plaform/sw-ohci.2
NOTE: It may not be completely the same, so just find similar lines and switch extsd and sdcard.
Battery replacement for MID-2330/MID-2330-S 3.7V 1.5A
Larger 5000mAH battery, kaso ikaw pa mag-sosolder sa main board. Dalawang wire lang naman e. Black and red. Haha. You'll have to re-adjust speaker though, di kasi kasya pag di ginalaw yung speaker. 3.7V 1.5A dapat.
http://www.aliexpress.com/snapshot/210152411.html
Q88 and Q8 firmware (para sa mga makukulit na off-topic )
http://www.symbianize.com/showthread.php?t=937042
Please ipagkalat nyo na din. Ang daming nagtatanong kahit sa PM.
Sprite error (isa pa to )
Gumamit ng LiveSuit kung ayaw ng PhoenixCard. Ganun lang kasimple. Further questions about this will not be entertained, so wag makulit. :P
Recalibrate your crappy touch screen (not 1 cm shifted touch screen issue)
http://www.symbianize.com/showthread.php?p=15763582
Fix 1 cm shifted touch screen (I haven't tried this, YMMV)
You need a script.bin and script0.bin from a firmware with working touchscreen for this to work.
1. Turn on USB debugging on your tablet, then plug it into your PC's USB port.
2. Open a command prompt, then type adb shell.
3. Enter the following commands:
4. If this appeared:
You have successfully mounted nanda, where script.bin and script0.bin are located. Back them up somewhere safe, then use the adb pull command to pull the files to your PC.
5. Drag them one at a time to unscript.bat (rename each before reconverting the other, as they will overwrite) to convert them to fex, then use Notepad++ to edit the files. Replace the [ctp_para] section of your ROM's bin files with the [ctp_para] of the ROM with the working touch screen.
6. Use script.exe to rescript them into bin files (don't forget to rename them back to script.bin and script0.bin) and use adb push to push them back to /sdcard/nanda
7. Reboot your tablet
Hopefully it works?
Editing your build.prop
Soon..