help brick may alcatel 918n

[corossi]

pa help po.,i accidentally brick may phone.,.,
hndi na po sya nag chacharge.,.black screen.,.,
na try kona ung otu.,latest version na daw.,,huli kong ginamit ung flash tool..aun may napindut ata akong backup dellet all-restore nvram.,
na check ko ung android name sa scatter file dun sa flash open tool.,aun napunta sa pc ko ung back up.,.nasa isang folder name backup nvram.,laman nun binregion.img at checksum.,un po
hndi na sya ma open.,.black screen.,may way paba para maaus to.,

ty sa mag cocoment skin

tnx a lot

 

[rsp27ph]

THE solution of your problem man !!!!!
I found it !

I assume you have already Flash Tools and One Touch Upgrade 1.8.2

Step 1 : Download the file '2.3.5_Europe.zip' (file attachement)
Step 2 : Open Flash Tool
- Option --> Check USB MODE
- Option --> Backup Restore NVRAM --> Check Backup --> .....
- Scater-loading File --> "MT6573_Android_scatter.txt" (in 2.3.5_Europe)
- Click DOWNLOAD
Step 3 : Wait up to the end.

When it's finished, open One Touch Upgrade and do an Upgrade

It works very well now !! Here under is the link for file 2.3.5 Europe.zip

http://forum.xda-developers.com/attachment.php?attachmentid=1219028&d=1343138995

After the OTU your phone is downgraded to android 2.3.5 v23AAMO ONE TOUCH 918D open line (for sun user, it will void warranty)
Good Luck !!!

 

[Bagsy17]

Galing mo TS help kaagad....pagpala-in ka ng panginoon!!!!!

 

[corossi]

sinubukan ko na po yan..,wala din nangyari.,.hndi ma detect ung usb ko.,then hndi po sya ma download kasi kailangan may isang check dun sa scatter.,.alin po ba dun ung dapat na naka check.,

 

[binoe766]

sinubukan ko na po yan..,wala din nangyari.,.hndi ma detect ung usb ko.,then hndi po sya ma download kasi kailangan may isang check dun sa scatter.,.alin po ba dun ung dapat na naka check.,

naka install ba ang pdanet (http://www.junefabrics.com/android/download.php) sa pc mo?...kung hindi pa dl mo muna pdanet, install then saka mo try mag flash

 

[rsp27ph]

Download and extract the file '2.3.5_Europe.zip' to a folder. open the flash tool ver.2.1134 and click scatter loading the file MT6573_Android_scatter.txt" (in 2.3.5_Europe folder)
Set to usb mode and click backup restore NVRAM...
Connect the phone and click download...
Wait up to the end.
When it's finished, open One Touch Upgrade and do an Upgrade

 

[warson08]

patulong naman po na brick po alacatel 918n 2.3.6 version. penge po ling ng file '2.3.5_Europe.zip. ung nka attach po kc sa taas not found na po. tnx in advance.

 

[charlie31985]

patulong naman po na brick po alacatel 918n 2.3.6 version. penge po ling ng file '2.3.5_Europe.zip. ung nka attach po kc sa taas not found na po. tnx in advance.

sir may cwm ka na po bang nakainstall if meron try this
http://www.symbianize.com/showthread.php?t=839960

 

[bondying1977]

THE solution of your problem man !!!!!
I found it !

I assume you have already Flash Tools and One Touch Upgrade 1.8.2

Step 1 : Download the file '2.3.5_Europe.zip' (file attachement)
Step 2 : Open Flash Tool
- Option --> Check USB MODE
- Option --> Backup Restore NVRAM --> Check Backup --> .....
- Scater-loading File --> "MT6573_Android_scatter.txt" (in 2.3.5_Europe)
- Click DOWNLOAD
Step 3 : Wait up to the end.

When it's finished, open One Touch Upgrade and do an Upgrade



It works very well now !! Here under is the link for file 2.3.5 Europe.zip

http://forum.xda-developers.com/atta...8&d=1343138995

After the OTU your phone is downgraded to android 2.3.5 v23AAMO ONE TOUCH 918D open line (for sun user, it will void warranty)
Good Luck !!!

sir, clarification lang. before you apply the above procedure, naka stock rom gingerbread 2.3.6 po ba ang unit ninyo?

then after this procedure, 2.3.5 na sya and open line na rin?


NOTE:

tried ko na ngayon lang. it made my unit openline and naging 918D 2.3.5 sya. kahit nag OTU ako after i flash ang procedure above, 918D 2.3.5 pa rin sya and openline...

hmmmm.... nice hehehe

will try to flash custom rom for 2.3.5 (if magkaroon ng time) kung gagana pa rin ba...

 

[charlie31985]

sir, clarification lang. before you apply the above procedure, naka stock rom gingerbread 2.3.6 po ba ang unit ninyo?

then after this procedure, 2.3.5 na sya and open line na rin?


NOTE:

tried ko na ngayon lang. it made my unit openline and naging 918D 2.3.5 sya. kahit nag OTU ako after i flash ang procedure above, 918D 2.3.5 pa rin sya and openline...

hmmmm.... nice hehehe

will try to flash custom rom for 2.3.5 (if magkaroon ng time) kung gagana pa rin ba...

nice1 feedback ka nalang po itatry ko sana kahapon yan kaso di ko ginawa ok na muna ako sa stock rom ko at nga pla may update version na po hehe 1 time flash no undetect sim error chainfire3d also fix tnx tas sa pagtry mo ng rom ko goodluck sa pagflash ng new rom

 

[bondying1977]

i tried installing the gingerblaze 1.2, it works as of now.
the Sim 1 is still openline and 2.3.5 pa rin, 918M ang lumabas since ito ata ang base rom nito. will observe more if magkaroon ba ng problems.
as of now ang problem ko na lang is to activate int2ext....

by the way, my unit is originally 2.3.6 from sun

 

[mejujael]

PO .

ung alcatel 918n 2.3.6 ko po ayaw na mag open. khit sa recovery mode ayaw n rin maopen. pag i-on mo walang ngyyri. in short dedo n tlga... my way p po b para buhayin to? please

 

[minarddres]

up ko lang po tong thread na to im having this problem also....nvram eror pag nagflaflash ako.any help po......

 

[teshew]

pa marka muna.. kakailanganin ko to sa sabado para sa cp ng katrabaho ko

 

[assasin17]

solution s mga problem na nbrik ay OTU lng yn.. bsta my alcatel managr suite kayo at pda-net..

 

[jhordantee]

ako din mga master, stuck at boot logo yung alcatel gloryx918n ko. forgot to create backup. need ideas po. tia

 

[tedicruz]

Ive tried everything possible to follow the instruction but my phone wont accept the 2.3.5 downgrade I got Alcatel OT 918N from SUN, but its totally dead now cause maybe I flash the wrong preloader, now it wont turn on, ive tried the OTU but it says I got the LATEST UPDATE, now I've tried the downgrade 2.3.5 Europe but I got this error from SP Flash Tool;

BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] OBTAIN DRAM FAILED
[HINT]
PLEASE CHECK YOUR LOAD MATCHESTO THE TARGET WHICH IS TO BE DOWNLOADED

What happened then and what should I do, it takes 2 weeks for me to do any tricks but unfortunately found nothing happens...
help!!!

Please I need your answers badly

I am using the following files for flash
2.3.5 easyway files
2.3.5 Gingerbread
2.3.5 Europe
Alcatel 918 Mix 2.3.6 Files
2.3.6
Gingerbread 2.36

but none are successfull! I need your brains badly! thanks

 

[pedro_kangkong007]

mga ser tanong lg xenxa na noobs.. pag na brick mo ba yung phone mo rooted na yan? at pag katapos nyung apply yung solution na yan baxt to normal lg po ba yan?? or rooted na xa? thanks...

 

[asdfghjkaaaat]

Hello, I need help. I bricked my Mom's Alcatel One Touch 918N. I was trying to root it, e naalala ko na-update ko nga pala yung software nya. Then I tried to downgrade it to 2.3.5 using SP Flash Tool. Then afterwards, hindi na sya mabuksan, all black but yung blue led is still working kapag charging and pag naka-connect sa pc. But hindi na sya na-on and hindi na din ako makapag-recovery mode using vol+ and power button. I tried OTU 1.8.2 and 1.8.3, but says no newer version. Now I'm trying to use again SP Flash Tool, ang problema yung SP Flash Tool ko is not initializing after clicking Download button I'm stuck at 0%.

View attachment 152397

Sira ba SP Flash Tool ko? Pls Help!

 

[kulotUBECity]

ako din.. im stuck at this one.. ;C

Hello, I need help. I bricked my Mom's Alcatel One Touch 918N. I was trying to root it, e naalala ko na-update ko nga pala yung software nya. Then I tried to downgrade it to 2.3.5 using SP Flash Tool. Then afterwards, hindi na sya mabuksan, all black but yung blue led is still working kapag charging and pag naka-connect sa pc. But hindi na sya na-on and hindi na din ako makapag-recovery mode using vol+ and power button. I tried OTU 1.8.2 and 1.8.3, but says no newer version. Now I'm trying to use again SP Flash Tool, ang problema yung SP Flash Tool ko is not initializing after clicking Download button I'm stuck at 0%.

View attachment 872348

Sira ba SP Flash Tool ko? Pls Help!