- Messages
- 144
- Reaction score
- 0
- Points
- 26
Mga ka SB I've done almost everything that I know to figure out what's wrong with my computer. So far the only thing that I could think of is MOBO probably died.
No sounds can be heared. The beeping wasnt there. No fans running. But the KEYBOARD lights are on (aside from numlock/capslock/scrllock they dont work).
It never showed any problem before, it suddenly stopped working earlier today.
System specs:
Gigabyte GA-H81M-DS2
Intel i3 G3258
MSI GeForce GTX 670
4gB(2X) RIPJAWS DDR3
Corsair VS450 PSU
SSD 120GB and HDD 1TB
What I've done so far:
1. Reseated everything
2. Resetting CMOS bat (also plugged a new one)
3. Tried shorting the Power with screwdriver (just in case the wires are the ones at fault)
4. Borrowed a friend's PSU (generic, 650w 24 pins but there's no slots for my gfx card)
5. Tried to check PSU (paper clip test, it worked)
6. Changed thermal paste
7. Plugged only PSU mobo still wont start
8. Plugged PSU, ssd
9. Plugged PSU, ssd, ram
10. Plugged gfx card, ssd, ram
11. Cleaned PSU to be free from dust
12. Made sure the PSU switch was on
Maloloka na ko sa kaka palit palit ng hardware, lahat sinubukan ko na. Waley pa din.
Thanks in advance!!
No sounds can be heared. The beeping wasnt there. No fans running. But the KEYBOARD lights are on (aside from numlock/capslock/scrllock they dont work).
It never showed any problem before, it suddenly stopped working earlier today.
System specs:
Gigabyte GA-H81M-DS2
Intel i3 G3258
MSI GeForce GTX 670
4gB(2X) RIPJAWS DDR3
Corsair VS450 PSU
SSD 120GB and HDD 1TB
What I've done so far:
1. Reseated everything
2. Resetting CMOS bat (also plugged a new one)
3. Tried shorting the Power with screwdriver (just in case the wires are the ones at fault)
4. Borrowed a friend's PSU (generic, 650w 24 pins but there's no slots for my gfx card)
5. Tried to check PSU (paper clip test, it worked)
6. Changed thermal paste
7. Plugged only PSU mobo still wont start
8. Plugged PSU, ssd
9. Plugged PSU, ssd, ram
10. Plugged gfx card, ssd, ram
11. Cleaned PSU to be free from dust
12. Made sure the PSU switch was on
Maloloka na ko sa kaka palit palit ng hardware, lahat sinubukan ko na. Waley pa din.
Thanks in advance!!