Mechanical Engineering Thread

[silent16]

Mga sir may alam ba kayong mapagdodownloadan ng table ng conversion ng units at mga constants para po sa review ko, and mga pdf or ebooks na rin problems for PIPE and Machine Design salamat.

sir try mo to, credits kina sir devilbat and mam kers
http://www.symbianize.com/showthread.php?t=1103712&highlight=tordillo
http://www.symbianize.com/showthread.php?t=443520&highlight=mechanical+engineer+reviewer

 

[jojoh12]

mga sir,,baka naman po pwedenh makahingi ng topic para sa RM,,karamihan kasi ay existing na,,salamat po,,kelangan lang talaga po

 

[hexboyers]

Hi mga sir may piniem na po ako dito na need ko po Mechanical engineer na Board passer po ( kaso walng tumulong sakin bale need po namin para maging model engineer kaya may fifill upan po na question sana po may tumulog sakin :/

 

[kEnpumareS]

mga engr. patulong nga po magdesign ng jib crane that can carry a load of 4 tons .. 4thyr student here .. thanks

 

[FUuuuuu]

patambay XD

 

[chocolates]

Good afternoon to all my Fellow Registered Mechanical Engineers and aspiring ME..

this is to inform you of another MONEY-MAKING Program of PSME.. nakakalungkot pero totoo. I received this email last month.



From: DOMINGO CHINEL [mailto:[email protected]]
Sent: Friday, September 23, 2011 11:05 AM
To: Noel A.Villena [DPDI]
Subject: Fw: ADDENDUM ON CIRCULAR No 0104-PSME 2011 - CPE IMPLEMENTATION


--

From: PSME National Office <[email protected]>

Sent: Friday, September 23, 2011 9:43 AM
Subject: ADDENDUM ON CIRCULAR No 0104-PSME 2011 - CPE IMPLEMENTATION



Circular Ref. No.: 0105-PSME2011

DATE : September 20, 2011

TO : All Chapter Presidents

RE : ADDENDUM ON CIRCULAR NO. 0104-PSME 2011-CPE IMPLEMENTATION
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Dear Fellow Engineers,

Greetings!

The CPE Credit Units on Accredited Program, Activity or Source, will be effective on October 1, 2011; therefore, the earning of credit unit ( 1-credit hour = 1-credit unit ) will start as follows:

October 1, 2011 to September 30, 2012 ------ 20 - credit units

October 1, 2012 to September 30, 2013 ------- 20 - credit units

October 1, 2013 to September 30, 2014 ------- 20 -credit units

Total for 3-years ---------------------------------------- 60- credit units - are required for renewal of PRC ID/License for baccalaureate degree. For non-baccalaureate degree (CPM), 30-credit units are required for 3-years or 10-credit units per year. Any excess credit units earned shall not be carried over to the next 3-year period except for doctoral and masteral degree or for other special training.
The above cycle will be repeated every 3-years to coincide with the renewal of PRC ID/License.

For the upcoming PSME 59th National Convention on October 25-28, 2011 at SMX Convention Center, PSME National will be the CPE Provider. A total of 20-credit units or 20-credit hours will be given to participants who will register and pay the Convention fees and must register at all plenary sessions and technical paper presentations. Certificate of Attendance will be issued by PSME National.

Credit units will also be given to qualified Resource Speakers, (5- total credit units per hour) Moderators / Facilitators (2-total credit units per hour), Panelist/Reactor 3-total Credit units per hour).

Participants must fill-up PRC Form No. 08-2008 Attendance Sheet on Program, Activity or Source indicating complete name of participant including middle initial, signature, current/valid PRC ID/License No and Expiry date.

The assigned Moderator must fill-up PRC Form No. 07-2008 Completion Report of CPE Program Activity or Source submit to the PSME CPE Council not later than 15-days after the conduct of last program.

Specific guidelines will be issued prior to the National Convention.

Please be guided accordingly.


(sgd)
Ernie Casis
Chairman -PSME CPE Council and Past National President


Noted:

(sgd)
Liberato S. Virata
National President


------------


Summary: hindi ka mkkpag renew ng license without taking up the units required, sana PME nlang at hindi na sinali ang RME at CPM. Imagine, sa lahat ng engineers, RME LANG ANG WALANG KARAPATAN PUMIRMA (extra income un syempre) SA MGA DESIGN/DRAWING PLANS.

REE - pwede pumirma ng residential plans
RCE - pwede pumirma ng civil/structural palns
RME - pwede pumirma ng ???? wala, walang pwedeng pirmahan dahil PME lng ang pwede pumirma.

para po sa kaalaman ng lahat, malaking tulong ung pagpirma na yun dahil extra income yun. tapos ngayon may pakulo pa sila na dapat a-attend ng convention which costs not less Php4000??
kasi last year Php4500 ang reg'n fee sa lahat ng activity..

Sa totoo lang , dalawa lisensya ko. RME at RMP (master plumber).
nakaka-Php60,000++ na ako sa mga napirmahan kong sanitary and plumbing permit, sa RME wala. nkkalungkot talaga.

Sir ano review materilas ng RMP?
Thanks

 

[dclever06]

Sir 4th year student and aspiring to be an ME here..pwde po sanang humingi ng ideya pra sana pang thesis..maraming salamat po s tutulong..

 

[ENGRngTUP]

Good afternoon po, alam niyo po bang gumawa ng manual golf ball dispenser. Yung gagamit lang po ng linkages for Machine Elements. Third year ME student po ako. Salamat po.

 

[jay75]

..goodluck sa mga kaBatch kong magEexam ngayong September 2014. TOP THE BORD!!! watch out for Bicolanos! XD

 

[arkhinne]

View attachment 186598

sa mga magtetake po ng review maganda po tong product namin pampatalas ng memorya..
mas mabisa po to kesa sa pinapalabas sa tv na memory enhancer..
hindi lamang po to pampatalas ng memorya kundi may energy booster din po..

achievement po satin na pumasa sa board exam lalo na kung first take pa lang..
isang karangalan hindi lamang saung sarili kundi saung pamilya
matutulungan kau ng aming produkto na makamit ang inyong inaasam asam na lisensya..

 

[cengian]

Sa mageexam God Bless sa atin guys. Kaya yan.

 

[gearexpert]

congrats sa mga bagong engineers!

 

[tacs]

Hi engineers!! Ano pong magandang company applyan, gusto ko po sana sa field ng power plant.. Na maganda benifits at sahod.. Any recommendation salamat po..

NEW PASSER PALANG PO PALA AKO NGAUN OCTOBER 2014..

 

[katzou]

tol parehas pala tayong kapapasa lang. Ako naman eh sa engineering design interested. or piping design tapos saka pa yung sa power plant. hehe. good luck sa atin!

 

[tacs]

tol parehas pala tayong kapapasa lang. Ako naman eh sa engineering design interested. or piping design tapos saka pa yung sa power plant. hehe. good luck sa atin!

congrats sten ano review center mo? ako prime review center.. haha.. goodluck sten

 

[cengian]

ako rin kakapasa pa lang Prime din. congrats! HVAC sana ako, mga master any recommendation?

 

[xsolosps17]

Hi engineers!! Ano pong magandang company applyan, gusto ko po sana sa field ng power plant.. Na maganda benifits at sahod.. Any recommendation salamat po..

NEW PASSER PALANG PO PALA AKO NGAUN OCTOBER 2014..

Congrats bro! if gusto mo sa powerplant most probably youll end up as a trainee first try Sual Coal Fired Power Plant/San Roque Multi-Purpose Project. Yan nkikita ko na nhhire ng trainee, kailngan galingan mo dahil it will be base on your performance if they are going to hire you or not. By the way im working sa Alstom, Combined Gas Cycle Power Plant dito sa Bataan

tol parehas pala tayong kapapasa lang. Ako naman eh sa engineering design interested. or piping design tapos saka pa yung sa power plant. hehe. good luck sa atin!

Congrats bro!

if you have good scholastic record i suggest to you sa Flour Daniels or EEI or Chiyoda or Mitsubishi Heavy Industry those are design and construction company na pasok sa gusto mo.

ako rin kakapasa pa lang Prime din. congrats! HVAC sana ako, mga master any recommendation?

sayo? uhmm same lang ng kay katzou advice ko sayo.. hehe

- - - Updated - - -

pangalan po ba ng skul yang binanggit mo? Di po,taga Bataan po ako

Uyy my kababayan pala ako dito.

 

[jay75]

..fresh Mechanical Engineer in the house. haha.. congratz co engineers sa taas. XD

 

[weissraven]

may CPM b dito? gusto q mag exam s CPM e..meron b kau reviewer? thanks.....

 

[themasterbeater]

Mga bossing. student pa lng ako ngayon. meron bah kayong soft copy ng PSME code. Maganda kasi mag-aral ng codes and standards doon.