[my28/s] Openline

[reelmen04]

Re-up.

Let's start.
Download this Unified FW v4 Revised 3 (no pass)
https://mega.nz/#!2sMnQRCK!fGIUU-pa8Ir8Jd-G5c-G-ACpr0Hw4V01KUcy12QNu4U

Data fix for Unified v4
https://mega.nz/#!RwcWHZBI!9twE7fVZ0aZt1gVeRgIk8gNmtHpuBGTN1ldshseuqE4

Unified V4-R3 Performance Patch (by vasily ivan)
https://www.androidfilehost.com/?fid=24572369242686725

This patch includes:
-build.prop tweaks
-added enableswap.sh on boot.img
-preactivated/premounted zram

Download the UD tool:
https://mega.nz/#!alNGwYqJ!l0gzrPjDvzWNgwHA8VH0ciG7g1scHDzLP1IP1UEJUwM?

Download the driver:
https://mega.nz/#!3ltHiCaR!qdsQ3gtW2K5cb76Jr0BytoVRDGHdjmwHbHbVaHZg9sQ?

After you download the three of them, extract them on the desktop using winrar.

Before installing the driver, if your OS is 64-bit, you need to disable driver signature enforcement.
Here's how to disable it.

For Windows 7:
Go to Start Menu and type "cmd.exe" in the Search Bar and press . (Remember you must be logged on as Administrator)
OR you can go to "All Programs", then "Accessories", right-click on "Command Prompt" and choose "Run as administrator".

For Windows 8-10:
Hit the "Windows Key" + X then press A.

1. Now type the following and press after each line:
   

   bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
   bcdedit.exe -set TESTSIGNING ON

2. Restart your computer
3. This will disable driver signing.

How to install Driver:

1. Open the extracted driver.
2. Go to production_line_version then pick x86 if your OS is 32-bit, amd64 if your OS is 64-bit.
3. Run dpinst.exe to install driver.

How to flash Openline Firmware.

1. Open UD tool (UPGRADEDOWNLOAD_R2.9.9015\Bin\UpgradeDownload.exe)
2. Click "Load Packet" (Gear icon)
3. Find the extracted firmware (.pac) then select it.
4. Wait for the firmware to load.
5. After the firmware is loaded, click "Start downloading" (right arrow)
6. Turn off your phone.
   Hold both Volume keys then plug the device to your PC while holding them.
7. If you see "In progress" under "status" of the UD tool, Release both volume keys.
8. After the tool finished the job, you should see "PASSED" in the status section.
9. Wait your device to boot. Take note that it will boot longer in the first one, but not anymore on further boots.
10. After your device has booted, you will see that the internal storage is low. Just factory reset it (Settings > Backup and Reset > Factory Reset)
11. (If you are using v4 firmware) Boot to recovery (hold power in one second then hold the volume up) then flash the data fix.

If you're seeing white screen after flashing, instructions here
Done!
You can also try the pre-applied patch by flashing .zip or .pac by mashuser3004 (also mirror) here:

mang hahijackk ako ng thread. lel.. jowk

magpopost lang po ako ng mirror dito:

Change in PAC files:
1. Whitescreen fix already applied
2. Openlined File using NVItems from Miracle Box Method..

Links:

TWRP Flashable Zip :3
TWRP-UnifiedV4r3_scriptv3.zip 357MB
This installs all parts of the rom and requires you to flash three more zip files after you flash this file so that bootloops would be avoided. The three more zip files will be extracted to your micro.sd card so that you can flash them.. Three files would appear in your sdcard after flashing this file: 1. ReplaceKRwithSU-Flashable.zip, BETA-SuperSU2.74.zip and xposed-v85-sdk22-arm.zip. Flash this files once you have flashed the file below.
Download Link:
https://mega.nz/#!RpMRRbbL!6A6lmwd_G7H8QYQB4Kv3o4T0VOOhcBLPPtLbTsDuzec
http://www.mediafire.com/download/3r3r1pmdmvv95o9/TWRP-UnifiedV4r3_scriptv3.zip

PAC File Via PC: MyPhone_MY28_Unified_V4_By_Team28Devs_Revised3
270.7MB
https://mega.nz/#!UxkS2DTZ!tass8_IRatjyrGeOVXM__Z4ryMrFXmgakvc5aJ-tICw
http://www.mediafire.com/download/1cn67ka9kuuvkzr/MyPhone_MY28_Unified_V4_By_Team28Devs_Revised3.7z

Credits to Team28Devs
Sir Benj for repacking PAC files and TWRP Flashable Script :3

Credits to Team28Devs and the my28/my28s group!

 

[ZeroWill]

UP T.S .. Balak ko bumile ng My28s

 

[XtimeCatuira]

hirap mag download sa MEGA. bm ko muna tagal kasi download..

 

[chEOng]

sir deadlink n po?..

 

[reelmen04]

sir deadlink n po?..

Di pa po patay. kakacheck ko pa lang

 

[Einstein0624]

Hi po. Para po ba ito sa MyPhone My28s? TIA

 

[reelmen04]

Hi po. Para po ba ito sa MyPhone My28s? TIA

basahin po ang title. both for my28 and my28s.

 

[dyowei]

You can flash nvram only...

Instant openline na ang unit...

No data loss

 

[jerMac1994]

You can flash nvram only...

Instant openline na ang unit...

No data loss

Pano po sir?

 

[cris2000]

Pa bm ts salamat po..

 

[jorgeRapatan]

ang hirap mag dl sa mega..

 

[khenchen]

Re-up.

Let's start.
Download this firmware by Team28Devs (no password)
https://mega.nz/#!qpcURJIa!iuPEcThSwDWjmlQOqu8osSSJ8Z8BqzFSGc54Bw21wvE

Download the UD tool:
https://mega.nz/#!alNGwYqJ!l0gzrPjDvzWNgwHA8VH0ciG7g1scHDzLP1IP1UEJUwM?

Download the driver:
https://mega.nz/#!3ltHiCaR!qdsQ3gtW2K5cb76Jr0BytoVRDGHdjmwHbHbVaHZg9sQ?

After you've downloaded the three of them, extract them on the desktop using winrar.

Before installing the driver, if your OS is 64-bit, you need to disable driver signature enforcement.
Here's how to disable it.

For Windows 7:
Go to Start Menu and type "cmd.exe" in the Search Bar and press . (Remember you must be logged on as Administrator)
OR you can go to "All Programs", then "Accessories", right-click on "Command Prompt" and choose "Run as administrator".

For Windows 8-10:
Hit the "Windows Key" + X then press A.

1. Now type the following and press after each line:
   

   bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
   bcdedit.exe -set TESTSIGNING ON

2. Restart your computer
3. This will disable driver signing.

How to install Driver:

1. Open the extracted driver.
2. Go to production_line_version then pick x86 if your OS is 32-bit, amd64 if your OS is 64-bit.
3. Run dpinst.exe to install driver.

How to flash Openline Firmware.

1. Open UD tool (UPGRADEDOWNLOAD_R2.9.9015\Bin\UpgradeDownload.exe)
2. Click "Load Packet" (Gear icon)
3. Find the extracted firmware (.pac) then select it.
4. Wait for the firmware to load.
5. After the firmware is loaded, click "Start downloading" (right arrow)
6. Turn off your phone.
   Hold both Volume keys then plug the device to your PC while holding them.
7. If you see "In progress" under "status" of the UD tool, Release both volume keys.
8. After the tool finished the job, you should see "PASSED" in the status section.
9. Wait your device to boot. Take note that it will boot longer in the first one, but not anymore on further boots.
10. After your device has booted, you will see that the internal storage is low. Just factory reset it (Settings > Backup and Reset > Factory Reset)

Done!
Credits to Team28Devs and the my28/my28s group!

maraming salamat po nagaw q success naman tnx

 

[yheng2392]

hirap mag download sa MEGA. bm ko muna tagal kasi download..

download po kayo ng mega downloader..

 

[aklanon]

p bm po salamat po

 

[jorgeRapatan]

Naka deodex unified firmware nadin ba kayo mga ka symb?..

 

[yheng2392]

Naka deodex unified firmware nadin ba kayo mga ka symb?..

new rom po sa myphone my28s ?

 

[ennailohej]

Gumana at di po ba to nagkaerrorr sa my28s?

 

[reelmen04]

new rom po sa myphone my28s ?

Kind of, po. Meron na po akong bagong cp, pang backup nalang po itong my28 ko.

Gumana at di po ba to nagkaerrorr sa my28s?

Di naman po.
For starters: basahin niyo lang po yung Title ng thread...

 

[jecht]

ayos po ito sir. maoopenline ko na ang regalo ng nanay ko sa akin. sana hindi ko mabrick ito. pwede po ba sa windows xp gawin ito??

 

[yheng2392]

ayos po ito sir. maoopenline ko na ang regalo ng nanay ko sa akin. sana hindi ko mabrick ito. pwede po ba sa windows xp gawin ito??

pwedeng pwede po.