NEED HELP - ASUS RT-N14UHP Router

[sweetestjen]

Good afternoon po Mga Sir.
Need lang po sana ng assistance. After ko mag-update ng firmware ng router ko, hindi ko na ma-access yung setting nya. Hindi na rin mag-on yung wifi led light.

After po mag-update ng firmware sa internet, next sa procedure ay reboot your device manually. Power off ko yung device then power on. Hayun, dun na nagkaproblema. Steady blue light lang yung nasa power then off yung wifi led light then steady blue light din kapag nagkabit na ako ng lan cable.

Nagtry ako magreset using yung reset button pero not working din kahit more than 10 seconds na akong nakahold press.

Need some help and assistance po.

TIA.

 

[gabotron]

Na-corrupt yata ang firmware mo. If I remember correctly, mag-reboot na automatically ang router as part of the firmware update. Wala akong naalala na Power off then power on after a firmware update. Pang-power cycle na procedure yan eh.

As a last resort, sundin mo ang procedure dito. Click mo yung [Toubleshooting] Firmware update failed.

1. Kailangan mong i-download at i-install yung Firmware Restoration Utility.

2. Re-download mo na rin ang firmware mo para sigurado.

3. Read carefully and follow the steps in [Toubleshooting] Firmware update failed to put your router into Rescue Mode.

Di guaranteed yan. Ang Rescue Mode ay ang mode kung saan pwede kang mag-upload ng firmware sa router via TFTP para ma-overwrite yung corrupted firmware na kasalukuyang naka-install. As long as naka-Rescue Mode ang ASUS router, pwede kang mag-upload nang paulit-ulit.

 

[taurexn]

boot loop or partially bricked yun router, kung under warranty pa yan ipa service mo na lang. otherwise kung lampas na at na try mo yun suggestions above ay you need to explore other options, you might need yun factory or stock firmware

 

[sweetestjen]

Many thanks Sir Gabo and Sir Taurexn for details. Nasundan ko naman ng maayos yung procedure and okay na ulit router ko.

God bless po and keep up the support. Hmmmuah!