O+ 8.37 - Official Thread (Rooting & StockROM w/ CWM)

[glennlevi]

Boss pwede ba to sa O+8.37z?
Nasa postpaid plan po sya ng suncellular, pero kahit saan sa internet d ko makita yung model nya - parang wla talagang gantong model ang O+.
Tska iba din itsura nya sa O+8.37
Thanks po ng marami.

 

[stefgod14]

sir ..herson ano last na ginawa mo sa phone mo bago nag ka ganyan ? hardbreak yong phone mo

 

[Zakkir Malik]

boss wala bang photo para makita naman namin kung nag work sya salamat...

 

[mommyow23]

Paano po i hard reset tong 0+8.37 ko? naghang po kasi sa logo aftr ko irestart. help po.

 

[thugz_11]

Boss pwede ba to sa O+8.37z?
Nasa postpaid plan po sya ng suncellular, pero kahit saan sa internet d ko makita yung model nya - parang wla talagang gantong model ang O+.
Tska iba din itsura nya sa O+8.37
Thanks po ng marami.

TS, ganito rin tanong ko. Pwede po ba ito sa O+ 8.37z? Pwede po ba ito iunlock para kahit anung SIM pwede magamit? Thanks po.

 

[gaboski]

I. How to enable debugging mode on your phone.
A. Go to Settings >Developer option then check "USBDebugging".
*Note: kung di nyo makita ang Developer optionnyo*
B. Go to Settings>About phone>then tap 7x "BuildNumber",
C. Go back to 'Settings', the you will'Developers Option'.

II.1. ROOT your O+8.37 in an easy way...
A. Download Framaroot 1.9.1 and install it inyour phone.
B. Open framaroot, select SuperSU, chooseBoromir.
C. Wait until installation completed, then 'Reboot' your phone.(Rooted na phone mo). Otherwise, use you own method.
*Use Root checker basic to Verify root access.*

II.2 Root your phone using MTK Android AutoRoot-UnRootExploit-Script v1.0 beta.exe
A. Download it to your computer and install it
B. Open MTK Android AutoRoot Exploit.bat to run the command...
C. Follow the instruction flashed on bat...

MTK_Android_AutoRoot-UnRoot_Exploit-Script_v1.0_beta.exe

III. Installation of CWM (O+8.37)
1.) *Download Mobile Uncle*, download alsoRecovery.img and placeit to the root of yourSDcard.
A. Install Mobileuncle Tool and open it,
B. Tap 'Recovery Updates' then select 'Recovery.img'.
-You will be asked whether you really want to flash thatfile into yourphone, and you should say 'OK'.-
The flashing process will run, and then you willbe asked whether to"Boot Into Recovery Mode", tick 'OK'. Done..

2.) *Recovery Tools v1.8.4.apk* for flashing of CWM/CTR-para samga users na di mapaga ang Mobileuncle Tools.
1. Install & open application.
2. Tap 'Flash Recovery', tick 'Other from Storage', then locate &select recovery.img, tick 'yes, please',
and you will be ask again to "Reboot into recovery now?", tickagain 'yes, please', wait until your phone rebooted to Recovery...

Oplus_8.37_Scatter_File_+_CWM&Stock_Recovery.exe

*Rename it to 'recovery.img' w/o qoute before flashing it viaMobileuncle Tool.*

IV. For BOOTLOOP Units, Lets Revive Your Phone...
Files needed for Flashing, download the ff.
1. MT657x_USB_VCOM_Driver.exe
2. SP_Flash_Tool_v3.1344.0.212.exe
3. Your Working Stock ROM.Steps:
A. Install MT657x_USB_VCOM_Driver.exe
B. Extract your working 'Stock ROM' to desktop.
C. Install SP_Flash_Tool_v3.1344.0.212.exe
D. Open SP flash tool, click 'Scatter-loading',locateMT657x_Android_scatter.txt file fromyour extracted 'StockROM Folder' inyourdesktop, select & open it, then 'unchech Preloader',press 'F9/Download'to start flashing...*Small pop-up window appeared and asking you to"Do youstill want to go on downloading anyway?",-click 'yes'.
E. Then connect your phone(Switched Off mode) topc using your 'Usb DataCable', wait until finished.*Indication of flashing completed, smallpop-upwindow appeared with 'Large Green Circle'.F. Disconnect phone ang 'SwitchOn'. Done...

>MT65xx_USB_VCOM_Driver-XP,Vista,7&8.exe

>SP_Flash_Tool_v3.1344.0.212.exe

>O+8.37 Stock ROM+CWM

Oplus 8.37 Flashable Stock ROM Based.zip

*How to flash...
1. For fresh ROM:
-To CWM/CTR
-Wipe menu>Wipe All Data-Preflashed
-Install zip from sdcard>Locate Oplus 8.37 Flashable Stock ROM Based.zip, then flash it.
Wait till installation completed, the reboot...
2. For retained data:
-Go directly to Install zip from sdcard.

*Requested by O+8.37 Users*

PEDE PO PALINK NG THREAD NG O+8.37z ? DI PO AKO MAKAPAG RECOVERY EH ROOTED NAKO :3

 

[mcsundae]

ts pwede ba to sa 8.37z?

 

[kotonglupa]

ts baka pwede po eto sa O+8.52 nag hang kasi phone ko almost 1 month ng stock up... (
help nmn po sa O+ users jan na may katulad ng phone ko...

 

[akosiraff]

Hello! Baka may makatulong, may pina paayos sakin yung kaibigan ko na O+ 8.37, Hard Bricked siya, yung ayaw mag ON, ayaw mag boot maski sa Recovery pero binabasa ng SP Flash Tool.

Kapag nag pa-Flash ako sinasabi DRAM FAILED. Sa pag se-Search ko sa XDA may paraan pa pala, unfortunately wala sa same unit na nais ko ayusin.

HETO yung solusyon nila, wala ako masyado alam sa ganito, pero its something to do with the Preloader:
Source: http://forum.xda-developers.com/showthread.php?t=2775196#post54430240

Hi Guys!

If you hard bricked your Zopo C2, don't panic! Fortunately, the MTK chipset is not easy to kill!
I brought you the solution!

First of all! Calm down, drink a cup of coffee or a cold beer, smoke a cigarette, and follow these steps:

1. Download files from the attachments!
What you will need:
- The Flashtool MTK Driver.rar
- SP Flash Tool, use this version!!!
- The correct preloader (you found A and B version, download which you need)

2. Unrar these files to separate folders.

3. Install the Flashtool MTK driver as administrator!

4. Open the SP Flashtool as Administrator!

5. Open the scatter file (the preloader which you downloaded at step 1.) These file only contain the preloader, not the ROM!

6. Click the Download icon, and connect your USB cable to your computer and your Phone. Don't take out the battery!

If you follow these easy steps, the program goes to the green ring on, and your phone is ready to wake up!

Here's another one:
Source: http://forum.xda-developers.com/showthread.php?t=2447431&page=10

let's do it step by step (and your comment after "==>")

1- Download http://forum.xda-developers.com/atta...mentid=2342635
we need just the preloader_edit.bin

2- Download then unzip the ROM Files :
http://www.4shared.com/rar/I99JRo7U/...JB3_fix_p.html
http://www.4shared.com/rar/3q3l2pLb/...JB3_fix_p.html
http://www.4shared.com/rar/DeNaJAYS/...JB3_fix_p.html
http://www.4shared.com/rar/iEOEI1PC/...JB3_fix_p.html
http://www.4shared.com/rar/pHZGmzkx/...JB3_fix_p.html
http://www.4shared.com/rar/nbuvfCxf/...JB3_fix_p.html

3- Remove the phone battery, open the sptool click on preloader then select preloader_edit.bin instead of preloader.bin
==>

4- connect the phone, when it's detected by PC, click on format
==>

5- disconnect then connect the phone again, when it's detected by PC click on "Firmware Upgrade"
==>

6- Wait the end of upgrade operation then disconnect and reboot the phone

Baka po may maibigay kayo sa akin na file na gaya niyan na para sa O+ 8.37 para magawa ko po din yung STEPS na to. THANKS po. GOD BLESS

 

[gothicmeizha]

penge naman po recovery.img direct link na po please

or password po ng scatter file at flashable stock rom...tia

 

[hastalavista]

pa try sir nito. para mabuhay cp ko . salamat sa thread

 

[nairbdg21]

sir working po to sa 8.31? thanks po

 

[TribuNi]

Thank u TS, MTK worked on 8.37. Rooted na hehe, mkakaa pag install na ng XMOD wahahhaa

 

[miharu143]

Pasubscribe mga kaunit haha

 

[xluxusx143]

gagana po yung CWM sa O+ 8.37z?

 

[karnekurt]

ako rin po gagana po ba rin to sa 8.37z tas pedeng gawing lollipop galing sa jellybean?

 

[Tatsunomi]

I ported Dolby Digital Plus for the O+ 8.37.

Here's the link: Click Here

 

[audrei06]

Sir di ko na masundan ung step III. di na kasi ma read ng laptop ko ung cp.

 

[miharu143]

patut naman mga ka unit kung panu mag edit ng bubbles .

 

[pROAddictus]

penge naman po recovery.img direct link na po please

Eto na po: http://www.mediafire.com/download/d6nbn2d2rkwr84a/recovery.img.Oplus8.37.rar

Just extract and copy recovery.img to your SD card or external storage