- Messages
- 772
- Reaction score
- 0
- Points
- 26
Re: B310as-938 Unlock and Full instructions
Bossing may Solusyon po ba yung power led lang nagpapalkita?pano po reflash?
Bossing may Solusyon po ba yung power led lang nagpapalkita?pano po reflash?
Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.
All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!
Reformat or gmit iba pc mas ok kung windows 7
Ou kahit ni reflash ko di talaga pero sa ibang modem working naman sa ethernet ports. Naka try na po ba kayo ng ganitong issue?
mga TS gud day po,, pa up naman po ako,,, kasi detected naman sya sa device manager before ako mag run,,, pag katapos ng usb loader hanggang scanning device na lng po,, tapos nawala na yung sa port,, any idea po, tnx,,,
View attachment 1295055View attachment 1295056
sino sa inyo naka experience na after flashing, na lock sya lahat na network?...b310as-938 ko lock to all network na after ko ni re-flash sa update...di na mag dedetect ng SIM...sana may maka tulong..thanks
sino sa inyo naka experience na after flashing, na lock sya lahat na network?...b310as-938 ko lock to all network na after ko ni re-flash sa update...di na mag dedetect ng SIM...sana may maka tulong..thanks
5. Assuming that all drivers are installed, open the Balong USB Download mode folder and select Balong USB mode flasher.exe
6. Wait for the device to lit the power light
7. Check if the device has been detected (Device manager)
8. Run Unlock FW.exe and wait for it to finish
9. Plug an ethernet cable and launch Network lock remover + USB Download mode.exe (Follow the prompts).
Note: the Network lock remover + USB Download mode.exe has also the option to enter the USB Download mode of your device
so you wont have to bother on unplugging the device and putting a jumper pin again to enter the USB Download mode.
It means that after running the network unlocker and you followed the prompts correctly, the device is READY TO FLASH THE
"Balong USB mode flasher.exe" w/out performing the JUMPER METHOD.
10. Launch Balong USB mode flasher.exe and once the device entered the USB Mode
11. Launch the Firmware Update_11.326. MOD.exe and wait until it finish.
12. Plug in the ethernet if you have unplugged it previously and try to log in to the GUI
13. Check your "Device information" if you have a valid IMEI. If values are all 15 "0", Open IMEI Changer and run IMEI Changer.exe
14. Follow the prompts and type in your Original IMEI and apply it. Wait for it to reboot and you are done