Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

PRINTER PROBLEM FOR CANON MP258, MP287, IP2770 only

help me naman po kasi yung printer ko pong canon ip2770 hnd po sy nagpiprint...
nagrorolled lng po yung papper nya wala pong print. hope you can help me po. tnx po...
 
sundin mo lang po steps na ito..

FIRST STEPS: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down STOP/RESET button and press Power button.
3. Keep holding down Power button and let STOP/RESET button go.
4. Then Press STOP/RESET button twice then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter

1. After you download the resetter, extract it and double click "servicetool.exe"
2. Load some papers in your printer and press the "Main" Button once, wait until the printing is done.
3. Then press "EEPROM Clear" button to clear EEPROM.
4. Then press EEPROM button and the printer will print some text.
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

wala bang resetter bro?
 
Hello, active pa ba ito TS?
Magpapatulong lang po sana ako, Canon Pixma MP287,
steady light lang po yung ALARM and parang di ako maka connect sa SERVICE MODE... ano po kayo problema... thank you
 
Boss patulong naman sa canon mp287 ko pag ginagamit ko yung copier kasi, pag labas nung output nasa bandang gilid sya ng papel napiprint kahit nasa gitna ng papel yung original na image parang na move sya dun sa print out? pano kaya yun boss? Salamat1
 
Ano latest na resetter gamit niyo for Canon MP287?
 
MAGTANONG LANG PO KAYO MGA KA SB tungkol dito about canon printers sasagutin ko po..ty,
bago lang aq dito pero di matatawaran ang experience ko ^_^

not printing or error printing canon 1p2770 dnko makapag print...thanks
 
Last edited:
MAGTANONG LANG PO KAYO MGA KA SB tungkol dito about canon printers sasagutin ko po..ty,
bago lang aq dito pero di matatawaran ang experience ko ^_^


boss tanung ko lang yung printout ng printer ko may blank spot area tapos maingay na sya mag print parang may gumagasgas di ko alam kung san nangagaling yung tunog (Canon pixma MP258)
 
Last edited:
check m ung flex data ung film n white n nkakabit s nlalagyan ng cartridge cguro may punit n or sira n kaya ganyan ang printout FLEX po ang sira
 
Mga boss.. ano kaya prob. Ng canon pixma mp 287 ko steady po ang alrm botton nya.. din pag ninasok ko service tool nag eerror sya error code :006 po ...

- - - Updated - - -

Boss anu balita sa mp 287 mo ok nah??
 
MAGTANONG LANG PO KAYO MGA KA SB tungkol dito about canon printers sasagutin ko po..ty,
bago lang aq dito pero di matatawaran ang experience ko ^_^

boss pahingi nmn ng resetter canon mg2570 kung meron..salamat ng marami
 
good day po mga sisir...tatanung ko po sana kung anu problema at anu ba dapat gawin sa canon pixma mp287 na printer ko hindi po kasi maayos mga nilalabas nyang print,,may mga kulay na di maayus at pag nag print ng picture may mga guhit din po...
 
good day po mga sisir...tatanung ko po sana kung anu problema at anu ba dapat gawin sa canon pixma mp287 na printer ko hindi po kasi maayos mga nilalabas nyang print,,may mga kulay na di maayus at pag nag print ng picture may mga guhit din po...

magchange cartridges ka both color and black kahit maintenance mu yan 10x hindi maalis yang guhit na yan
 
Pa help naman mp287 printer ko not cis nirefill ko cartridge niya diy nagprint siya pero di marecognize ung ink level at always blinking lang ung led ng color at black.
 
Sir tanong ko po may resetter poba kayu sa canon ip 2870 kasi tatlong unit namin dinala sa service center hindi nila tinatanggap kasi wala daw silang mga resetter nito pls help feedback ,ideas, tips tnx u godbless hintayin ko pm mo
 
patulong sana dito sa canon mp237 printer namin. ano kaya problema kapag walang lumalabas na print kapag nagprint. Nag try na ako mag clean, pati sa test print wala rin lumalabas.
 
Sir pano yung sa canon ip2770 feeder error e.. di kumukuha ng papel.. at sa isa naming printer na pareho din ng model wala namang power... paano po ito ayusin?...
 
MAGTANONG LANG PO KAYO MGA KA SB tungkol dito about canon printers sasagutin ko po..ty,
bago lang aq dito pero di matatawaran ang experience ko ^_^


hello boss pahelp naman po sa canon mp237 ang printer ko with cis ang problema ko po ay sa twing magpiprint ako ibang kulay ang lumalabas for example pink ang ipiprint ko pero kapag naprint ko na ang lumalabas na kulay ay yellow orange kapag red naman ay yellow ang lumalabas pag blue naman ay green kapg orange ay yellow ang lumalabas. Sana po ay matulungan mo ko. God Bless
 
Back
Top Bottom