- Messages
- 288
- Reaction score
- 0
- Points
- 26
How to remove "PLDTMyDSL" prefix from your WIFI router name (SSID) on SPEEDSURF 504AN
Ishare ko lang po ang tutorial na ginawa ni sir valvowski sa kabilang thread. CREDITS GOES TO SIR valvowski
Eto po mga need and steps:
1. Open Mozilla Firefox Browser
2. Install Add On (FIREBUG) https://addons.mozilla.org/en-us/firefox/addon/firebug/
3.Type this on the address of your browser (firefox):
192.168.1.1 then "adminpldt" for username, "1234567890" for the password.
4. Click Network>>WLAN>>Basic Setting
5. Now right click SSID texbox (un may nkalagay po na PLDTMyDSL na papalitan natin)
6. Inspect Element with Firebug
7. Click Console then Enable
8. Click Script then Enable
9. Follow nyo instruction ni sir sa baba
Eto po screenshots credits naman kay sir qwyncy
Also credits to sir estorgio sa tuts How to remove "PLDTMyDSL" prefix from your WIFI router name (SSID), tested on PROLiNK H5004N
http://www.symbianize.com/showthread.php?t=931068
HOW TO LIMIT WIRELESS (WIFI) BANDWITH credits again to sir qwyncy
Ishare ko lang po ang tutorial na ginawa ni sir valvowski sa kabilang thread. CREDITS GOES TO SIR valvowski
Eto po mga need and steps:
1. Open Mozilla Firefox Browser
2. Install Add On (FIREBUG) https://addons.mozilla.org/en-us/firefox/addon/firebug/
3.Type this on the address of your browser (firefox):
192.168.1.1 then "adminpldt" for username, "1234567890" for the password.
4. Click Network>>WLAN>>Basic Setting
5. Now right click SSID texbox (un may nkalagay po na PLDTMyDSL na papalitan natin)
6. Inspect Element with Firebug
7. Click Console then Enable
8. Click Script then Enable
9. Follow nyo instruction ni sir sa baba
dapat enabled yung console tsaka script, if need to reload, reload mo lang page.
makikita mo yung console tsaka script tab dun sa window ng firebug, tabi tabi lang sila, console, html, css, script, dom, net, cookies,
click mo yung script tab, hanapin mo yung savechanges, pag nakita mo scroll down lang, makikita mo rin yung Message na Root SSID must begin with PLDTMyDSL, sa taas non, mga 2 lines above kita mo yung "if (place!=0)", right click mo yun tapos set break.
pag na set na yung break, minimize mo yung firebug, set mo na ssid mo, then click apply changes button, kung tama ginawa mo, dapat mag stop sya dun sa break point na set mo.
pag place mo yung mouse pointer mo dun sa "place" variable, makikita mo -1, tingin ka dun sa right most window ng firebug, makikita mo dun yung -1, right click mo sya then edit properties yata yun, palitan mo ng 0 (zero)
pag tama ginawa mo, "place" mo ulit mouse pointer dun sa place variable, dapat 0 na lumalabas.
right click mo na yung break point then continue.
yun na dapat yun.
Eto po screenshots credits naman kay sir qwyncy
Also credits to sir estorgio sa tuts How to remove "PLDTMyDSL" prefix from your WIFI router name (SSID), tested on PROLiNK H5004N
http://www.symbianize.com/showthread.php?t=931068
HOW TO LIMIT WIRELESS (WIFI) BANDWITH credits again to sir qwyncy
hindi mo na need ng QOS try mo to im sure effective yan, kung 3mbps plan mo pwede mo ibigay sa kanila yung 1.5mbps, sa akin kasi 5mbps ako then i set mine to(2M = up to 1.5mbps sa wifi users) yun nga lang sa mga lan users unlimited,,so dapat may limitation ka din sa lan users kasi kapag nagdownload ka sa lan mahahatak yung 1.5mbps nila.. dont forget to hit "apply changes" then SAVE sa left side ng UI...hope this helps
Last edited: