View attachment 170458View attachment 170459View attachment 170460View attachment 170461
dapat po rooted na ang phone at tsaka may CWM na yung phone.
wag po kayong mag alala hindi po masisira ang phone niyo dahil 100% work on our CM Burst S280 and wala po siyang kahit ni iisang mga BUGS.
Heres lang link:
YAKI ver.1.2.2.A (BALANCE) http://www.mediafire.com/download/dcgajbqg53if8oh/YAKIv.1.2.2.A(Balance)).zip
YAKI ver.1.2.2.A (gamemode)own http://www.mediafire.com/download/oozy7qrwvy3o75d/YAKIv.1.2.2.A(GameMode)own.zip
CHOOSE ONLY ONE mga TS ^_^
first post ko po eto sa SB sobrang Newbie dito.
sana po magustuhan niyo.
Procedure.
1. DL zip files
2. Place it on your sd card
3.wipe data/factory reset
4.wipe cache
5. Wipe dalvik cache and batterry stats
* you can find these two, on the advance setting of your cwm
6. Install zip ( look for the Yaki Rom on your Sd card)
7.install Yaki Rom
8. Once you're done and was succesfully installed yaki rom.
Look for the Pre-installed Root Cleaner App.
9. Click the settings button of the app, which is placed on the upper right corner. Check battery calibration, and remove init.d , then do full cleaning.
* you need to do this to make sure the rom and the phone will work well.
It is the reason why , root cleaner was pre- installed by its developer anyway.
10. It will reboot automatically.
Now go back to Cwm, then reflash or install the rom once more without doing no.3,4 and 5.
Now wait to boot.
Now Presto. You have succesfully flashed Yaki Rom.
simpleng thanks okay na po sa akin ^_^
dapat po rooted na ang phone at tsaka may CWM na yung phone.
wag po kayong mag alala hindi po masisira ang phone niyo dahil 100% work on our CM Burst S280 and wala po siyang kahit ni iisang mga BUGS.
Heres lang link:
YAKI ver.1.2.2.A (BALANCE) http://www.mediafire.com/download/dcgajbqg53if8oh/YAKIv.1.2.2.A(Balance)).zip
YAKI ver.1.2.2.A (gamemode)own http://www.mediafire.com/download/oozy7qrwvy3o75d/YAKIv.1.2.2.A(GameMode)own.zip
CHOOSE ONLY ONE mga TS ^_^
first post ko po eto sa SB sobrang Newbie dito.
sana po magustuhan niyo.
Procedure.
1. DL zip files
2. Place it on your sd card
3.wipe data/factory reset
4.wipe cache
5. Wipe dalvik cache and batterry stats
* you can find these two, on the advance setting of your cwm
6. Install zip ( look for the Yaki Rom on your Sd card)
7.install Yaki Rom
8. Once you're done and was succesfully installed yaki rom.
Look for the Pre-installed Root Cleaner App.
9. Click the settings button of the app, which is placed on the upper right corner. Check battery calibration, and remove init.d , then do full cleaning.
* you need to do this to make sure the rom and the phone will work well.
It is the reason why , root cleaner was pre- installed by its developer anyway.
10. It will reboot automatically.
Now go back to Cwm, then reflash or install the rom once more without doing no.3,4 and 5.
Now wait to boot.
Now Presto. You have succesfully flashed Yaki Rom.
simpleng thanks okay na po sa akin ^_^
Attachments
Last edited:
