- Messages
- 71
- Reaction score
- 0
- Points
- 26
For Users of Samsung Galaxy SII Korean SHW-M250S Variant
who wanted to upgrade os.
JellyBean 4.1 for Samsung Galaxy S2 SHW-M250S Variant
1. Download the KIES_HOME_M250SKSJMB2_jellytwo blog.tar firmware from here or here (mirror).
2. Download the pit file from here.
3. Go to download mode by pressing [Power+Voldown+home button at the same time] then click the Vol up to confirm to go to download mode. There should be big Android in the center of the screen.
4. Download Odin from here and
Download and install Samsung Drivers.
5. Run ODIN(run as admin if using win7 or vista) then connect your phone to you pc through a usb cable.
6. Fill up the PDA using the Firmware you got. Fill up the pit using the m250k_pit I provided in the attached file.
7. Hit start and pray for luck.
8. Rebooting would take quite some time.
Done.
Credits to Sir kaizer216.
---------------------------------------------------------------------------------
ADS:
For Sale!
Original Brand New External Charger/Stand and
Extra Battery for Samsung Galaxy S2 (i9100/M250S)
for only P999 laguna area only..pm lng po kayo
---------------------------------------------------------------------------------
ICS 4.0.4 for Samsung Galaxy S2 SHW-M250S Variant
Needed Files:
1. Samsung Android Drivers.
2. Odin
3. Stock ICS ROM named: M250S_HOME_M250S.UH07.1652_CL906886_REV02_user_low_ship.tar.
Procedure:
1. Start Odin and click the ‘PDA’ button. Browse for the firmware update file, Load the file that has the ‘.tar’ extension.
M250S_HOME_M250S.UH07.1652_CL906886_REV02_user_low_ship.tar.
2. Do not change any default settings of Odin. Also, make sure that the ‘Re-partition’ option is disabled. Press START to begin the installation of the latest ICS update on your SHW-M250S device.
3. When the installation is finished your phone will restart and when the boot logo appears you will need to disconnect it from your PC. Odin will say ‘PASS’ and you’re done. Note that in case ODIN says that the operation failed then you will need to disconnect the phone from PC, close ODIN window, remove the phone’s battery and then re-insert it. Boot again into Download mode and repeat the tutorial starting with step 1.
Done.
Credits Sir kgp700
Pls notify me if i failed to mention anyone.
---------------------------------------------------------------------------------
Convert Samsung Galaxy S2 Korean Variant (SHW M250S) to International GT-i9100 Version
Warning: This method is not recommended and not tested by me, do at your own risks.
You will lose the ability to watch DMB-T TV.
There are 2 ways to do that:
1. Flash a fw tarball via Odin
2. Use heimdall to flash the new Firmware [May 16 2013]
Now you have 2 options:
1. Repartition to I9100 partition layout
2. Keep your existing partition layout
If you plan to flash again soon a Korean rom, I suggest you go with 2, otherwise 1.
If you choose 2 the steps are really simple:
1. Make an efs backup
2. Repeat 1
3. Reboot into Download mode
4. Fire up Odin or heimdall and flash the firmware as pda
5. When it fails during factoryfs flash simply remove the battery and reboot again into download mode
6. Flash the kernel now only
7. Reboot
8. Enjoy
If you choose option 1 (which I think is the best) you will first have to uninstall Kies.
1. Reboot into download mode
2. Using heimdall go to utilities tab and where it says "download pit file" select a location to save it (i name it M250S.pit) and download it to your pc(not mac, we hate macs)
3. Reboot into download mode again.
4. Now using either Odin or heimdall flash the firmware and select as pit the I9100 ext4 pit.
In Odin tick also Repartition.
5. The flash will succeed with no errors whatsoever
6. Keep the M250S.pit in a safe.
If you want to go back to Korean simply repeat and substitute I9100.pit with M250S.pit
Done.
Attachments:
GTI9100_ext4.rar
M250K_ext4.rar
Credits to Sir MemoryController
--------------------------------------------------
If i helped you please hit that "Repute" button thanks
My Threads
who wanted to upgrade os.
JellyBean 4.1 for Samsung Galaxy S2 SHW-M250S Variant
1. Download the KIES_HOME_M250SKSJMB2_jellytwo blog.tar firmware from here or here (mirror).
2. Download the pit file from here.
3. Go to download mode by pressing [Power+Voldown+home button at the same time] then click the Vol up to confirm to go to download mode. There should be big Android in the center of the screen.
4. Download Odin from here and
Download and install Samsung Drivers.
5. Run ODIN(run as admin if using win7 or vista) then connect your phone to you pc through a usb cable.
6. Fill up the PDA using the Firmware you got. Fill up the pit using the m250k_pit I provided in the attached file.
7. Hit start and pray for luck.
8. Rebooting would take quite some time.
Done.
Credits to Sir kaizer216.
---------------------------------------------------------------------------------
ADS:
For Sale!
Original Brand New External Charger/Stand and
Extra Battery for Samsung Galaxy S2 (i9100/M250S)
for only P999 laguna area only..pm lng po kayo
---------------------------------------------------------------------------------
ICS 4.0.4 for Samsung Galaxy S2 SHW-M250S Variant
Needed Files:
1. Samsung Android Drivers.
2. Odin
3. Stock ICS ROM named: M250S_HOME_M250S.UH07.1652_CL906886_REV02_user_low_ship.tar.
Procedure:
1. Start Odin and click the ‘PDA’ button. Browse for the firmware update file, Load the file that has the ‘.tar’ extension.
M250S_HOME_M250S.UH07.1652_CL906886_REV02_user_low_ship.tar.
2. Do not change any default settings of Odin. Also, make sure that the ‘Re-partition’ option is disabled. Press START to begin the installation of the latest ICS update on your SHW-M250S device.
3. When the installation is finished your phone will restart and when the boot logo appears you will need to disconnect it from your PC. Odin will say ‘PASS’ and you’re done. Note that in case ODIN says that the operation failed then you will need to disconnect the phone from PC, close ODIN window, remove the phone’s battery and then re-insert it. Boot again into Download mode and repeat the tutorial starting with step 1.
Done.
Credits Sir kgp700
Pls notify me if i failed to mention anyone.
---------------------------------------------------------------------------------
Convert Samsung Galaxy S2 Korean Variant (SHW M250S) to International GT-i9100 Version
Warning: This method is not recommended and not tested by me, do at your own risks.
You will lose the ability to watch DMB-T TV.
There are 2 ways to do that:
1. Flash a fw tarball via Odin
2. Use heimdall to flash the new Firmware [May 16 2013]
Now you have 2 options:
1. Repartition to I9100 partition layout
2. Keep your existing partition layout
If you plan to flash again soon a Korean rom, I suggest you go with 2, otherwise 1.
If you choose 2 the steps are really simple:
1. Make an efs backup
2. Repeat 1
3. Reboot into Download mode
4. Fire up Odin or heimdall and flash the firmware as pda
5. When it fails during factoryfs flash simply remove the battery and reboot again into download mode
6. Flash the kernel now only
7. Reboot
8. Enjoy
If you choose option 1 (which I think is the best) you will first have to uninstall Kies.
1. Reboot into download mode
2. Using heimdall go to utilities tab and where it says "download pit file" select a location to save it (i name it M250S.pit) and download it to your pc(not mac, we hate macs)
3. Reboot into download mode again.
4. Now using either Odin or heimdall flash the firmware and select as pit the I9100 ext4 pit.
In Odin tick also Repartition.
5. The flash will succeed with no errors whatsoever
6. Keep the M250S.pit in a safe.
If you want to go back to Korean simply repeat and substitute I9100.pit with M250S.pit
Done.
Attachments:
GTI9100_ext4.rar
M250K_ext4.rar
Credits to Sir MemoryController
--------------------------------------------------
If i helped you please hit that "Repute" button thanks
My Threads
Last edited: