- Messages
- 3,027
- Reaction score
- 1
- Points
- 28
Installing Android Kitkat 4.4.2 (CyanogenMod 11) on Galaxy Tab P1000This tutorial is intended only for the old Samsung Galaxy Tab P1000 (GSM)
Credits to CyanogenMod website
Special thanks to sir themonyo "the helpful demon" for maintaining my previous thread on CM9 on GT-P1000
Disclaimer: Before beginning with the procedure to install Android 4.4 Kitkat on Galaxy Tab P1000 version you must know that once the procedure in the tutorial is followed your warranty stands void. The given method is risky and can cause your device to brick. It is therefore recommended that you follow the procedure carefully and perfectly. The processes that you carry out on your device are solely at your risk. I do not take responsibility for any damage to your device.
No stable CM11 release for GT-P1000 as of the moment so what I have used is only a nightly build rom pero sa ngayon masasabi ko na ito pa lang po ang rom ng CM11 na wala namang bug on wifi, bluetooth, camera as of now on my GT-P1000. I'm using the cm-11-20140116-NIGHTLY-p1.zip on my device at ok naman po sya.
No stable CM11 release for GT-P1000 as of the moment so what I have used is only a nightly build rom pero sa ngayon masasabi ko na ito pa lang po ang rom ng CM11 na wala namang bug on wifi, bluetooth, camera as of now on my GT-P1000. I'm using the cm-11-20140116-NIGHTLY-p1.zip on my device at ok naman po sya.
Download Cyanogenmod 11 for P1000 ----> here
Download Google Apps (gapps) ----> here
Download cm-11-20140116-NIGHTLY-p1.zip ----> here
For Google apps on cm11 version click the link and download the one via Itvends
===============================
Download Google Apps (gapps) ----> here
Download cm-11-20140116-NIGHTLY-p1.zip ----> here
For Google apps on cm11 version click the link and download the one via Itvends
===============================
This tutorial is intended for SGT-P1000 running:
Android 2.3 Gingerbread
Android 4.0.4 (based on Cyanogenmod 9)
Android 4.1 (based on Cyanogenmod 10)
Your device should be rooted and clockwordmod recovery (CWM) installed in it.
INSTRUCTIONS:
Note: If you are running 2.2 please update your device first to 2.3 and root it and install CWM in it before proceeding. Try to google it. If you are running 2.3 but not yet rooted and no CWM recovery installed, click here.
1. Download the two files and place both in a folder or a location in your device's internal storage where you can easily find it. Don't unzip, just copy and paste the files.
2. Back up all your important data (apps, contacts, etc.). Pwede ring hindi if there's nothing important to back up. It's up to you.
3. Power off your tablet.
4. Enter CWM recovery by powering your device off and then powering it back on while keeping the ‘Volume-Up’ button pressed.
5. While navigating on CWM use Volume up and down as directional buttons and Power as enter button.
6. Select wipe/data factory reset. Select wipe cache partition and go to "advanced" and select "wipe dalvik cache" and once finished, press the back button of your tab.
7. Now select the “install zip from sdcard” option and then choose “choose zip from sdcard” option. Go to the folder where you placed the cm11 file and select it. Your system will reboot because it will first update your CWM to CWM v6.
8. When the new CWM interface appears, select "install zip" then "choose zip from/storage/sdcard0 and go to the folder where you placed the cm11 file and select it again to continue installing. It may take less than 5 minutes so be patient.
9. Once finished go back to the same location and select google apps to install it. It may take less than 5 minutes so be patient.
10. Once finished tap "reboot system now". First boot from installation may take up to 5 to 10 minutes. Sa una lang naman po pero sa susunod na pag boot ay hindi na po.
11. Enjoy your Samsung Galaxy Tab p1000 running Android 4.4.2
For those having problems and wants to go back to 2.3.6 Gingerbread
Thank you po and Good luck!
Android 2.3 Gingerbread
Android 4.0.4 (based on Cyanogenmod 9)
Android 4.1 (based on Cyanogenmod 10)
Your device should be rooted and clockwordmod recovery (CWM) installed in it.
INSTRUCTIONS:
Note: If you are running 2.2 please update your device first to 2.3 and root it and install CWM in it before proceeding. Try to google it. If you are running 2.3 but not yet rooted and no CWM recovery installed, click here.
1. Download the two files and place both in a folder or a location in your device's internal storage where you can easily find it. Don't unzip, just copy and paste the files.
2. Back up all your important data (apps, contacts, etc.). Pwede ring hindi if there's nothing important to back up. It's up to you.
3. Power off your tablet.
4. Enter CWM recovery by powering your device off and then powering it back on while keeping the ‘Volume-Up’ button pressed.
5. While navigating on CWM use Volume up and down as directional buttons and Power as enter button.
6. Select wipe/data factory reset. Select wipe cache partition and go to "advanced" and select "wipe dalvik cache" and once finished, press the back button of your tab.
7. Now select the “install zip from sdcard” option and then choose “choose zip from sdcard” option. Go to the folder where you placed the cm11 file and select it. Your system will reboot because it will first update your CWM to CWM v6.
8. When the new CWM interface appears, select "install zip" then "choose zip from/storage/sdcard0 and go to the folder where you placed the cm11 file and select it again to continue installing. It may take less than 5 minutes so be patient.
9. Once finished go back to the same location and select google apps to install it. It may take less than 5 minutes so be patient.
10. Once finished tap "reboot system now". First boot from installation may take up to 5 to 10 minutes. Sa una lang naman po pero sa susunod na pag boot ay hindi na po.
11. Enjoy your Samsung Galaxy Tab p1000 running Android 4.4.2
For those having problems and wants to go back to 2.3.6 Gingerbread
meron pa akong backup nung stock firmware JPE
upload ko lang sa google drive ng ARM
post ko link dito mamaya
edit: heto na yung links ng stock firmware
https://drive.google.com/folderview?id=0Bx7f3Mf3kNLTM1dkbEhCaWx4U0U&usp=sharing
3 laman na files nyan. yung JPZ Modem optional lang kung nagloloko network connection nyo
importante yung PIT atsaka TAR file
flash using Odin
@Trini2224
ate, paki-add na lang po yung link sa post mo sa 1st page para madali hanapin
Thank you po and Good luck!
Last edited:
