Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.
All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!
--ung nabasa mung suggestion? sa samsung lng yta gumagana un kz ngawa q na un sa cp ng pinsan ko, prang reformat kasi un..
*nagtry ka magopen ng google account mo sa PC?...
pero qng hindi mu kinancel ung ung ginawa mu sa #4 malamng naopen mu pa ung unit mu.. kz yang OTU n yan ang pinakamadaling praan pra masave ung unit sa error na nagwa naten
or pwede dn ung #5..
ang worst is hindi pa aus cp mu nagdowngrade kp.. kaya aun.. ganyan ung nangyare..naku3
then sabi mo nadetect pa yang cp mu ni pc.. so may pag-asa pa..
katulad lang din ng nangyareh saken..nadedetect pero ayaw mgopen..
gnmet ko dump files "Alcatel_918_N_2.3.6_rar" using flash tool..
tnanggal ko ung batt ,after 1hr nagOTU aq,,, so nabalik sya sa dati
tinanggal ko ulet ung batt , tpos kinabukasan ko na sya pinagpatuloy(maskaet n kasi ulo ko tpos kabado pa ako)
ginamet ko na ung 2.3.5 europe(kz nga gusto q maopen sim1 slot)
kinabukasan gnmet q ung OTU 2.7.0.. un ok n cp q 2.3.5 na sya
since hindi sya gumana sayo, i assumed ndi rin gumana sau yung back up na nakapost dito.. u got 3 choices:
1.try ka nlng po magsearch ky google bout your problem..
2. magpost ka sa XDA or here baka po may tumulong sayo
3. dalhin mu sa wireless center
I am successful in reupgrading my phone to 2.3.6 via sp flash tool + nandroid back up.
ang downside is that di na ako makapag install ng custom specifically yung ICS ROM 2.3.6 ni sir mark.
sir paano mo nagawa ung sa sp flash? diba dapat patay ung phone mo then saka mo sya isasaksak after mo iclick ung "download"? kasi sa akin after ko maclick ung download then ikinabit ko na ung phone ko, after few seconds ay lalabas lang na parang nagchacharge ung phone ko at hindi nagconnect sa computer ko. kaya hindi ko mai-flash. help naman po. thanks.
P.S. Nagana po ba ung blinking led para sa phone na upgraded lang?
Mga Sir patulong naman po every time na mag restore ako ito yung lumalabas nag downgrade/upgrade po ako same issue
Checking MD5 sums...
ERasing boot before restore...
Restoring boot image...
Error while flashing boot image!
my solution ba ung hindi na mag on ang cp at di na rin madetect lng pc.. may blue led xa pagisaksak mo sa pc... hehehe help please..
Originally Posted by rsp27ph View Post
Tutorial on how to flash back your OT918N from version 918D 2.3.5 to version 918N 2.3.6 Gingerbread using Mediatek Flash Tool.
Requirements:
Attached file below,
Your 2.3.6 nandoid backup, (warning: be sure your nandroid backup is not corrupted)
Your phone alcatel OT918 from Sun.
Quote:
Originally Posted by rsp27ph View Post
Here is my nandroid backup 2.3.6 gingerbread stock original with no alteration. Enjoy...
http://www.mediafire.com/?erz4yym6bi95wd6 2.3.6 nandroid backup
http://www.symbianize.com/attachment...6&d=1349481223 2.3.6 gingerbread folder
Step 1: Download the file below and put it on your desktop (2.3.6 Gingerbread folder).
Step 2: Extract your nandroid backup (2.3.6) from your sd card to your desktop.
Step 3: From your nandroid backup place the "boot.img", “system.yaffs2” and “data.yaffs2” inside the 2.3.6
Gingerbread folder
Step 4: Open Flash Tool, click scattered loading and go to folder 2.3.6 Gingerbread folder and
select “MT6573_Android_scatter” file. Click option “USB mode” and Backup-format-download-restore NVRAM. Now Flash only the following files:
PRELOADER
DSP_BL
pro_info
Click “download” and with your phone turn off connect the usb cable and flashing will start.
Wait till it ends indicating “Download OK” disconnect usb cable. Momentary remove the
Battery.
Step 5: Close the flash tool and open it again and click scatter loading and this time select“MT6573_Android_scatter 918N” file. Click option “USB mode” and Backup-format-download-restore NVRAM. Flash the following files:
PRELOADER - preloader
DSP_BL - dsp_bl.img
UBOOT - uboot.img
BOOTING - boot.img
RECOVERY - recovery.img
SEC_RO - firmware.info
LOGO - logo.img
ANDROID - system.yaffs2.img
USRDATA - data.yaffs2.img
Click “download” and with your phone turn off connect the usb cable and flashing will start.
Be patient this will take 4 to 5min. At the end it will indicate “EBOOT ERROR10001).
Don’t be alarm were not done yet. Remove the usb and close the flash tool.
Step 6: Open the flash tool again and click scatter loading and select
“MT6573_Android_scatter 918N”. Click option “USB mode” and Backup-format-download- no action.
Flash the following files:
UBOOT - uboot.img
BOOTING - boot.img
RECOVERY - recovery.img
LOGO - logo.img
Click “download” and with your phone turn off connect the usb cable and flashing will start.
Wait till it ends indicating “Download OK”. Disconnect the usb cable.
Step 7: On your phone go to recovery by pressing vol+ and power button and do a nandroid restore.
Restore to your 2.3.6 backup wait till it end and reboot.
I will upload my nandroid 2.3.6 backup soon…good luck. :
DSP_BL is checked but without path
pro_info is checked but without path
when im into step 4 what will i do?
edit: done i figured it out sa tut. sana maging 2.3.6 ako with blinking led light