How to Make Your Very Own ShadowSocks Server Guide

[skretch_20]

TS nagawa ko naman ng maayos yung tutorial mo bakit unusable pag icheck ko status gamit ang SSCAP? yung password ba doon ay ako ang gagawa? apat na port yung ginawa ko pero ayaw lahat. thanks po

Update: ok na TS, pero bakit ganun yung sa connection is almost 17? ano ibig sabihin nun?

Ikaw lang po ang naka connect dyan Sir, pero ang processes ng computer mo na gumagamit sa Socks5 mo 17. Yan po ibig sabihin nyan.

 

[crix58]

patulong po, na stock ako after nung .log

View attachment 320794

View attachment 320795

panu ba umexit jan, kaso wala na e niclose ko na ung "view console"
bukas edit ko ulit saang step na ako ulit? thanks

 

[fwmojana]

Ikaw lang po ang naka connect dyan Sir, pero ang processes ng computer mo na gumagamit sa Socks5 mo 17. Yan po ibig sabihin nyan.

thanks TS.

maiba po ako bakit po ang bilis ng consumption ko ng data? sa SSCAP ay nasa 1.75 GB palang na consume ko pero doon sa vultr account ko ay nasa 8.7 GB na?

 

[pardsmino]

thanks TS.

maiba po ako bakit po ang bilis ng consumption ko ng data? sa SSCAP ay nasa 1.75 GB palang na consume ko pero doon sa vultr account ko ay nasa 8.7 GB na?

Sir ask lang, nagagamit mo ba siya w/o promo? tsaka hindi ba siya nagfluflctuate or consistent siya sa idm? and lastly, natry mo na mag livestream sa youtube, twitch, etc.?

 

[fwmojana]

Sir ask lang, nagagamit mo ba siya w/o promo? tsaka hindi ba siya nagfluflctuate or consistent siya sa idm? and lastly, natry mo na mag livestream sa youtube, twitch, etc.?

gamit ko po to with out load. sa IDM naman malakas to pero paminsan2 nag flufluctuate din. 3G lang kasi signal dito sa amin pero nakakapag youtube din mejo mababa nga lang quality.

 

[crix58]

View attachment 320811

Thanks sa thread, it worked

 

[skretch_20]

gamit ko po to with out load. sa IDM naman malakas to pero paminsan2 nag flufluctuate din. 3G lang kasi signal dito sa amin pero nakakapag youtube din mejo mababa nga lang quality.

As long as its working pag walang load Sir it served its purpose. If mahina, dahil po yan sa availability ng 4g or 3g sa lugar nyo. Ang consumption naman ng bandwidth mas accurate ang sa VULTR compared sa SSCAP.

- - - Updated - - -

View attachment 1214171

Thanks sa thread, it worked

Your welcome Sir.

 

[crix58]

baka may tut ka pa dyan TS para iset up sa VPN? hehe

 

[skretch_20]

baka may tut ka pa dyan TS para iset up sa VPN? hehe

Hehehe, wala pa sa ngayon Sir.

 

[jaystream]

TS, bagohan lang po ako. May specific/modified application ba na gagamitin sa PC para makaconnect sa server? Ano2 po mga settings?

Ito ba ung sinasabing shadowsock application na ginagamit para makaconnect sa PC? -> https://github.com/shadowsocks/shadowsocks-windows/releases

Ano po ung SSCap? kelangan din po ba un?

Globe/TM lng po ba ang sim na gagamitin? Ano po config ng network?

Salamat po. Dami ko tanong. hehehe.

 

[crix58]

TS, bagohan lang po ako. May specific/modified application ba na gagamitin sa PC para makaconnect sa server? Ano2 po mga settings?

Ito ba ung sinasabing shadowsock application na ginagamit para makaconnect sa PC? -> https://github.com/shadowsocks/shadowsocks-windows/releases

Ano po ung SSCap? kelangan din po ba un?

Globe/TM lng po ba ang sim na gagamitin? Ano po config ng network?

Salamat po. Dami ko tanong. hehehe.

try mo dito sa thread na to http://www.symbianize.com/showthread.php?t=1433454

 

[ianba]

Attention: THIS is not FREE, you will have to pay atleast $5 to rent a Cloud VPS na pwede ninyong magamit for hosting a website, applications, VPN and Shadowsocks.

Tip lang: Gamitin nyong pang host ng wordpress site nyo ang Cloud VPS na to. Malaki ang kikitain sa pag blog at the same time may sariling VPN at Shadowsocks din kayo.

This tutorial will help you setup your very own Shadowsocks server on Vultr Cloud VPS.

Signing Up an Account in Vultr

If you don’t have a Vultr account, first you should sign up to get one. For new users, Vultr offers
a FREE $10 credit.

View attachment 1205999

Disclaimer: Links to vultr on this tutorial is my affiliate link.

If you sign-up under this link your $5 will become $10, so basically you will have 1 month free. Use this gift code "VULTRMATCH".

Lets Start!...



Create a Server at Vultr

1. After you have logged in your Vultr account,

Click on the blue “+” link on the right side of the interface.

View attachment 1206000

Then you will be asked to choose options to Deploy New Instance.

Suggested and recommended options

Server Location: Mas malapit mas OK

Server Type: Ubuntu 16.10

Choose a size: select $5/mo (or the bigger one if you decide to do so)

Leave steps 4, 5, 6, 7

Enter any server and label name of your choice

Then click on the “Deploy Now” button to create your instance.

View attachment 1206001

Once it’s done, you will be able to see your newly created instance listed under the Servers section of your

Vultr control panel.

Along with the name of the instance, you will also see a IP address for this.

Click your server to see your external IP address and your SSH Credentials

Connecting to Vultr Server to Setup Shadowsocks

Now that we have a Vultr server running, we need to connect to it and set up Shadowsocks.

You can connect to the server in two ways: using the web based access console provided by Vultr, or SSH to it using
a terminal on your local computer.

Now, let’s SSH to your Vultr server using command like this:

(If you are using the View Console Skip this Step and proceed immediately to 3rd Step)

View attachment 1206002

1.

ssh root@{your_instance_IP_address}

Once you have SSHed to the server, run the following commands:
First, if your login account is not root:

2.

$ sudo su

Then let’s update our machine:

3. Login Using Your Credentials as shown in the picture

View attachment 1206003

Once your logged in as root enter these commands:

$ apt-get update

Then let’s install shadowsocks using the following two commands:

4.

$ apt-get install python-pip 

$ pip install setuptools

$ pip install shadowsocks

Shadowsocks supports a number of encryption methods.

Below are the commands to setup the aes-256-cfb encryption:

5.

$ apt-get install python-m2crypto

$ apt-get install build-essential

$ wget https://github.com/jedisct1/libsodium/releases/download/1.0.10/libsodium-1.0.10.tar.gz

$ tar xf libsodium-1.0.10.tar.gz && cd libsodium-1.0.10

$ ./configure && make && make install

$ ldconfig

Now let’s create a config file for Shadowsocks, which should be created as “/etc/shadowsocks.json”. Let’s use the vi editor to do so:

6.

$ vi /etc/shadowsocks.json

(press “i” to edit and ESC then “:x” when your done to save the config)

Add the following contents to the shadowsocks config file:

7.1

{
    "server":"[COLOR="#FF0000"]your_server_IP_address[/COLOR]",
    "server_port":[COLOR="#FF0000"]8000[/COLOR],
    "local_port":1080,
    "password":"[COLOR="#FF0000"]your_password[/COLOR]",
    "timeout":600,
    "method":"aes-256-cfb"
}

Note that the configuration above only open up one port (8000) for your Shadowsocks server and it only supports one login.

If you want to set up multiple users each with a different passwords, you can do so by setting up multiple ports, each with a different password.

Below is a a config file example for doing that:

7.2

{
    "server":"[COLOR="#FF0000"]your_server_address[/COLOR]",
    "port_password": {
        "443": "[COLOR="#FF0000"]password1[/COLOR]",
        "8000": "[COLOR="#FF0000"]password2[/COLOR]",
        "8383": "[COLOR="#FF0000"]password3[/COLOR]",
        "8384": "[COLOR="#FF0000"]password4[/COLOR]"
    },
    "local_port":1080,
    "timeout":600,
    "method":"aes-256-cfb"
}

(press “i” to edit and ESC then “:x” when your done to save the config)

Now we are pretty much ready. We can start our new Shadowsocks server using this command:

8.

$ ssserver -c /etc/shadowsocks.json -d start

If you want to double check if everything is OK, you can check on Shadowsocks’ log file:

9.

$ less /var/log/shadowsocks.log

If you don’t see any error message in the Shadowsocks log file, then you are fine.

In the future, if you want to stop the Shadowsocks server, use this command: “ssserver -c /etc/shadowsocks.json -d
stop”.

If you want to restart the Shadowsocks server, use this command: “ssserver -c /etc/shadowsocks.json -d restart”.

There’s one more thing we need to set up. We need to make sure every time the server reboots our Shadowsocks
server will be started automatically. To do so, let’s use vi to edit the following file:

10.

$ vi /etc/rc.local

In the file opened, add the following line to the bottom, before “exit 0”:

/usr/bin/python /usr/local/bin/ssserver -c /etc/shadowsocks.json -d start

Great. Now we have a Shadowsocks server running on Vultr!

If you want to stop here, it’s totally fine. You can now enjoy your newly created Shadowsocks server on Vultr
and use it as you wish.

But let’s continue with some tips for Shadowsocks server optimization.

Shadowsocks Server Optimization

By default, our Shadowsocks server might not be able handle a lot of traffic.

If you want it to be able to handle a large amount of concurrent connections, you need to increase the max number of open file descriptors. Now let’s do so:

11.

$ vi /etc/security/limits.conf

Add the following two lines to that file:

* soft nofile 51200
* hard nofile 51200

Note: Don’t skip the “*” symbols as they are parts of the lines. After that, let’s temporarily stop the Shadowsocks
server:

$ ssserver -c /etc/shadowsocks.json -d stop

And then set the ulimit:

$ ulimit -n 51200

Then let’s tune the kernel parameters by editing the /etc/sysctl.conf file:

$ vi /etc/sysctl.conf

Add the following lines to the end of that file:

fs.file-max = 51200

net.core.rmem_max = 67108864
net.core.wmem_max = 67108864
net.core.netdev_max_backlog = 250000
net.core.somaxconn = 4096

net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 1200
net.ipv4.ip_local_port_range = 10000 65000
net.ipv4.tcp_max_syn_backlog = 8192
net.ipv4.tcp_max_tw_buckets = 5000
net.ipv4.tcp_fastopen = 3
net.ipv4.tcp_mem = 25600 51200 102400
net.ipv4.tcp_rmem = 4096 87380 67108864
net.ipv4.tcp_wmem = 4096 65536 67108864
net.ipv4.tcp_mtu_probing = 1
net.ipv4.tcp_congestion_control = cubic

To make our changes take effect, run this command:

$ sysctl -p

Now it’s time to re-start the Shadowsocks server:

$ ssserver -c /etc/shadowsocks.json -d start

Hope This Helped you Somehow. I'll try to help you as much as I can and according to my time vacant time.​

sir working po sa akin at ang bilis pa.. by the way sir unlimited po ba ito?

 

[ginawa]

bakit hindi ko to mapagana

 

[r0bzx26]

Wow nice tutorial pagkakakitaan naman to ng iba

 

[idolngbayan17]

pa BM po muna bossing. salamat

 

[skretch_20]

sir working po sa akin at ang bilis pa.. by the way sir unlimited po ba ito?

1 TB po ang bandwidth limit nyan every month Sir. Di naman siguro mauubos yan 1TB = 1000GB.

- - - Updated - - -

bakit hindi ko to mapagana

You can always try again Sir, follow the codes at make sure na walang kulang na punctuation. Sa pag edit naman ng .json file, "vi" po gamit ko pwede rin ang "nano" yan po ang mga tools na parang notepad sa windows. Para po ma edit ninyo ang setting ng server ninyo.

- - - Updated - - -

Wow nice tutorial pagkakakitaan naman to ng iba��

Kaya nga po Sir, pero wala tayong magagawa. Ganun talaga, human nature.hehehe just keep learning nalang Sir at use it for good purpose.

- - - Updated - - -

pa BM po muna bossing. salamat

Your welcome po, keep learning.

- - - Updated - - -

TS, bagohan lang po ako. May specific/modified application ba na gagamitin sa PC para makaconnect sa server? Ano2 po mga settings?

Ito ba ung sinasabing shadowsock application na ginagamit para makaconnect sa PC? -> https://github.com/shadowsocks/shadowsocks-windows/releases

Ano po ung SSCap? kelangan din po ba un?

Globe/TM lng po ba ang sim na gagamitin? Ano po config ng network?

Salamat po. Dami ko tanong. hehehe.

Oo nga po, ang dami Sir. Hehehe, sasagutin ko lang po yung kaya ko.

SsCap = Yan po yung app for windows para magamit ang nagawa mong server. After setting SsCap may isa pang step which is babaguhin mo ang proxy setting ng PC mo para mag connect sa Sscap sa network settings lang po yun.

Yup, Globe at TM po Sir. No config na po, connect agad.

Go ahead, tanong pa po Sir. Yung kaya ko po sagutin, sasagutin ko.hehehe Keep learning po.

 

[nawa]

boss yung gagamitin na computer pag nag set up ka na , ay gagamit tayo nang Ubuntu na computer ? or kahit Windows PC ay pwede natin itong e set up ?

 

[jxychrist]

Gift code no longer valid.

Sayang.Susubukan ko sana.

Anyway, TS, can I use Globe GCash MC or PayMaya Visa to fund/pay for the service? TIA

 

[skretch_20]

boss yung gagamitin na computer pag nag set up ka na , ay gagamit tayo nang Ubuntu na computer ? or kahit Windows PC ay pwede natin itong e set up ?

Opo Sir, kahit anong Operating System po.

- - - Updated - - -

Gift code no longer valid.

Sayang.Susubukan ko sana.

Anyway, TS, can I use Globe GCash MC or PayMaya Visa to fund/pay for the service? TIA

Wala na pong Promo Sir, in demand kasi ngayon. Yup, pwede kahit bitcoin po.

 

[jxychrist]

- - - Updated - - -
Wala na pong Promo Sir, in demand kasi ngayon. Yup, pwede kahit bitcoin po.

Thanks, Sir. Try ko to this payday. Update ako dito kung anong mangyari.

--EDIT--

TS, konting tanong lang. TIA

1) Ilang ports ang pwede kong i-open? I plan 10 users kasi. Android at PC.
2) May specific ports lang ba na pwede kong i-open? (wala akong alam sa ports ee. sorry po)