Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.
All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!
Re-up.
Let's start.
Download this Unified FW v4 Revised 3 (no pass)
https://mega.nz/#!2sMnQRCK!fGIUU-pa8Ir8Jd-G5c-G-ACpr0Hw4V01KUcy12QNu4U
Data fix for Unified v4
https://mega.nz/#!RwcWHZBI!9twE7fVZ0aZt1gVeRgIk8gNmtHpuBGTN1ldshseuqE4
Unified V4-R3 Performance Patch (by vasily ivan)
https://www.androidfilehost.com/?fid=24572369242686725
This patch includes:
-build.prop tweaks
-added enableswap.sh on boot.img
-preactivated/premounted zram
Download the UD tool:
https://mega.nz/#!alNGwYqJ!l0gzrPjDvzWNgwHA8VH0ciG7g1scHDzLP1IP1UEJUwM?
Download the driver:
https://mega.nz/#!3ltHiCaR!qdsQ3gtW2K5cb76Jr0BytoVRDGHdjmwHbHbVaHZg9sQ?
After you download the three of them, extract them on the desktop using winrar.
Before installing the driver, if your OS is 64-bit, you need to disable driver signature enforcement.
Here's how to disable it.
For Windows 7:
Go to Start Menu and type "cmd.exe" in the Search Bar and press . (Remember you must be logged on as Administrator)
OR you can go to "All Programs", then "Accessories", right-click on "Command Prompt" and choose "Run as administrator".
For Windows 8-10:
Hit the "Windows Key" + X then press A.
- Now type the following and press after each line:
Code:bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit.exe -set TESTSIGNING ON
- Restart your computer
- This will disable driver signing.
How to install Driver:
- Open the extracted driver.
- Go to production_line_version then pick x86 if your OS is 32-bit, amd64 if your OS is 64-bit.
- Run dpinst.exe to install driver.
How to flash Openline Firmware.
If you're seeing white screen after flashing, instructions here
- Open UD tool (UPGRADEDOWNLOAD_R2.9.9015\Bin\UpgradeDownload.exe)
- Click "Load Packet" (Gear icon)
- Find the extracted firmware (.pac) then select it.
- Wait for the firmware to load.
- After the firmware is loaded, click "Start downloading" (right arrow)
- Turn off your phone.
Hold both Volume keys then plug the device to your PC while holding them.- If you see "In progress" under "status" of the UD tool, Release both volume keys.
- After the tool finished the job, you should see "PASSED" in the status section.
- Wait your device to boot. Take note that it will boot longer in the first one, but not anymore on further boots.
- After your device has booted, you will see that the internal storage is low. Just factory reset it (Settings > Backup and Reset > Factory Reset)
- (If you are using v4 firmware) Boot to recovery (hold power in one second then hold the volume up) then flash the data fix.
Done!
You can also try the pre-applied patch by flashing .zip or .pac by mashuser3004 (also mirror) here:
Credits to Team28Devs and the my28/my28s group!
(update) fix for whitescreen issue after flashing uv3 and uv4-r3 firmware
credits to: Vasily ivan
note: The whitescreen issue is a kernel problem. The latest my28s-triband might have an updated kernel so that’s why the kernel of uv3 and uv4 is not compatible. This fix may solve the issue.
download here:
Rar https://www.androidfilehost.com/?fid=24566382913912992
or
zip https://www.androidfilehost.com/?fid=24566382913913032
this rar/zip file contains u-boot.bin, u-boot-spl-16k.bin, boot.img and recovery.img with the latest my28s-triband zimage.
1. Download the rar (tested_new_my28s_white_screen_fix.rar or tested_new_my28s_white_screen_fix.zip) file above and extract to a folder.
2. Open upgradedownload.exe and load c22j_my28_20160418_v4.18_unified_v4_by_team28devs_revised3.pac
3. Copy the u-boot.bin, u-boot-spl-16k.bin, boot.img and recovery.img you extracted earlier to upgradedownload folder/bin/imagefiles/_downloadfilesxxxxxxxx/
4. Replace the old u-boot.bin, u-boot-spl-16k.bin, boot.img and recovery.img that was extracted from .pac file
5. Begin reflashing...
-thanks to khian hd for this u-boot.bin, u-boot-spl-16k.bin and boot.img