- Messages
- 59
- Reaction score
- 0
- Points
- 26
mga ka sb humina po ba ang signal ng zte mf190 ninyo at naging 2g imbes na 3g?matapos kayo mag unlock?ito po ang good news ko.download nyo po itong dtac aircard. chage your firmware using this tool......
bago po ang lahat.ito po muna ang tut on how to unlock your zte mf190.copy paste ko lang po ito sa istorya.net hindi man lang po ako nakapag pasalamat sa naka diskubre nitong tut na ito..hindi po kase ako naka register sa wap site na yon.....
unlocking your SmartBro ZTE Mf190
Prepare the following files:
a. QPST Setup file - QPST_Setup.rar
b. dl_mf190s_eti_eg_euv1.00.00 - dl_mf190s_eti_eg_euv1.00.00.rar
c. ZTE MF190 Movistar ES - DL_MF190_MOVISTAR_ES_EUV1.00.00.zip
d. original SmartBro MF190 files
(Note: hindi na kailangan ang "DL_MF190_BLN_RU_EUV1.00.00" file, "Movistar ES firmware" will be good enough. Also, I am using Windows XP 32bit. And the orignal SMARTBRO Dashboard & Drivers ay already installed before doing the below instructions.)
Install QPST
Open QPST Configuration
Click "Add New Port"
select the port of your USB Modem
then click OK. You should see there SURFXXXX under Phone column.
Click "Start Client" (nasa taas menu bar)
click "EFS Explorer". You will see there the port with "SURFXXXX" na label
click OK. You will be presented with folders and files.
Do not touch the folders. Just to be sure,
save a copy of the following files before you delete them, 9 files all in all (this will serve as your original SmartBro MF190 Files). You can save a copy by highlighting all the files then right click. After saving a backup, DELETE the listed files.
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
2. Update firmware using "dl_mf190s_eti_eg_euv1.00.00" firmware file(approx.15mins.). After the update, the device will reset automatically and will install the dashboard na "ETISALAT"(I do not know if ano ang mangyayari if you will interrupt the installation process. Basta ako, I let it install). Base on my experience, it will ask for the drivers. Ang ginawa ko, I direct the path to SMARTBro Folder under Program Files, then sa Drivers folder, then depende na sa OS nyu.There are times when ma-pause and installation because hindi pa nainstall ang drivers. Once installed na ang drivers, the installation process will continue. Ang nangyari sakin, 2 Dashboards will showup, isa sa SmartBro and sa Etisalat. Just let it pop up then close/exit.
3. Others are suggesting na unplug then replug the USB stick, on my case hindi na. Dirediretso na ang pag-uupdate ng firmware. Next is to update the firmware this time using"ZTE MF190 Movistar ES" firmware. BUT BEFORE that, repeat Step 1 wherein you need to open QPST Configuration again. Do not touch the folders, you can save a backup copy of the files before deleting. Still DELETE the listed files.
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
4. This time update firmware using “ZTE MF190 Movistar ES” file (20-25mins.). Double click the file, wait for it to detect the device then proceed. After ma update, the device will reset automatically and will install the dashboard na "Movistar" and will ask for the drivers again. Still follow the same process. Now, 3 dashboards will pop-up, 1 SmartBro, 1 Etisalat, and 1 Movistar. Let the dashboards pop-up then simply close/exit.
5. Now this next step is the one I followed from the thread "Unlocking MF180" by jin. Back to Step 1 again, open QPST Config, then save a backup copy of the files except the folders if you want. I DELETED ALL the files (instead of ZTEMODEM.ISO file only) EXCEPT the FOLDERS, and drag & drop the files from the "original SmartBro MF190 folder", all 9 files drop to where I deleted the listed files:
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting and replacing the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
6. This time, unplug the USB stick, uninstall the 3 dashboards yung smartbro na dashboard, etisalat,and movistar na dashboard, then clean / fixed registry using ccleaner na software or any software alike. You can restart your computer after uninstalling all 3 softwares to prepare for fresh install once ireplug natin ang USB Stick.
7. Ikabit ang USB Stick na MAY IBANG SIM maliban sa smartbro. Then mag-ooautorun sya para mainstall ang dashboard na SmartBro at corresponding Drivers. You will be amazed na accepted ang sim and merong signal. OPENLINE na SmartBro ZTE MF190 Stick mo mga pre! Cheers! ASTIG!
Download Files here:
http://www.mediafire.com/?m62t8dv0w7v4sdb
http://www.mediafire.com/?bmhwrq2hzo67gv3
http://www.mediafire.com/?ljaojkg2f1syq3t
ito naman po ang aking idinagdag sarile ko po ito diskobre para po kung sakaling humina ang signal matapos mag unlock...pake sundan nalang po ang pag kaka sunod-sunod
step1.firmware zte mf190
download here
http://www.4shared.com/rar/gGFvak9T/...americano.html
step2.extrct nyo matapos mai download
step3. Open QPST Configuration
Click "Add New Port"
select the port of your USB Modem
then click OK. You should see there SURFXXXX under Phone column.
Click "Start Client" (nasa taas menu bar)
click "EFS Explorer". You will see there the port with "SURFXXXX" na label
click OK. You will be presented with folders and files.
Do not touch the folders. Just to be sure,
save a copy of the following files before you delete them, 9 files all in all (this will serve as your original SmartBro MF190 Files). You can save a copy by highlighting all the files then right click. After saving a backup, DELETE the listed files.
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
step4.This time update firmware using “firmware zte mf190 ” file (20-25mins.). Double click the file, wait for it to detect the device then proceed. After ma update, the device will reset automatically and will install the dashboard na "dtac aircard" and will ask for the drivers again. Still follow the same process. Now, dashboards will pop-up, dtac aircard. Let the dashboards pop-up then simply close/exit
step5.unplug mo zte mf190 m0
step6.uninstall smartbro dashboard
step7.use ccleaner or kahit anong cleaner to clean your registry
step8.replug zte mf190 den okey na po yan..balik sa dating signal yang zte mf190 mo...mas malakas pa signal kesa sa original na firmware...and dashboard is good looking...
ito naman po ang aking screenshot
bago po ang lahat.ito po muna ang tut on how to unlock your zte mf190.copy paste ko lang po ito sa istorya.net hindi man lang po ako nakapag pasalamat sa naka diskubre nitong tut na ito..hindi po kase ako naka register sa wap site na yon.....
unlocking your SmartBro ZTE Mf190
Prepare the following files:
a. QPST Setup file - QPST_Setup.rar
b. dl_mf190s_eti_eg_euv1.00.00 - dl_mf190s_eti_eg_euv1.00.00.rar
c. ZTE MF190 Movistar ES - DL_MF190_MOVISTAR_ES_EUV1.00.00.zip
d. original SmartBro MF190 files
(Note: hindi na kailangan ang "DL_MF190_BLN_RU_EUV1.00.00" file, "Movistar ES firmware" will be good enough. Also, I am using Windows XP 32bit. And the orignal SMARTBRO Dashboard & Drivers ay already installed before doing the below instructions.)
Install QPST
Open QPST Configuration
Click "Add New Port"
select the port of your USB Modem
then click OK. You should see there SURFXXXX under Phone column.
Click "Start Client" (nasa taas menu bar)
click "EFS Explorer". You will see there the port with "SURFXXXX" na label
click OK. You will be presented with folders and files.
Do not touch the folders. Just to be sure,
save a copy of the following files before you delete them, 9 files all in all (this will serve as your original SmartBro MF190 Files). You can save a copy by highlighting all the files then right click. After saving a backup, DELETE the listed files.
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
2. Update firmware using "dl_mf190s_eti_eg_euv1.00.00" firmware file(approx.15mins.). After the update, the device will reset automatically and will install the dashboard na "ETISALAT"(I do not know if ano ang mangyayari if you will interrupt the installation process. Basta ako, I let it install). Base on my experience, it will ask for the drivers. Ang ginawa ko, I direct the path to SMARTBro Folder under Program Files, then sa Drivers folder, then depende na sa OS nyu.There are times when ma-pause and installation because hindi pa nainstall ang drivers. Once installed na ang drivers, the installation process will continue. Ang nangyari sakin, 2 Dashboards will showup, isa sa SmartBro and sa Etisalat. Just let it pop up then close/exit.
3. Others are suggesting na unplug then replug the USB stick, on my case hindi na. Dirediretso na ang pag-uupdate ng firmware. Next is to update the firmware this time using"ZTE MF190 Movistar ES" firmware. BUT BEFORE that, repeat Step 1 wherein you need to open QPST Configuration again. Do not touch the folders, you can save a backup copy of the files before deleting. Still DELETE the listed files.
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
4. This time update firmware using “ZTE MF190 Movistar ES” file (20-25mins.). Double click the file, wait for it to detect the device then proceed. After ma update, the device will reset automatically and will install the dashboard na "Movistar" and will ask for the drivers again. Still follow the same process. Now, 3 dashboards will pop-up, 1 SmartBro, 1 Etisalat, and 1 Movistar. Let the dashboards pop-up then simply close/exit.
5. Now this next step is the one I followed from the thread "Unlocking MF180" by jin. Back to Step 1 again, open QPST Config, then save a backup copy of the files except the folders if you want. I DELETED ALL the files (instead of ZTEMODEM.ISO file only) EXCEPT the FOLDERS, and drag & drop the files from the "original SmartBro MF190 folder", all 9 files drop to where I deleted the listed files:
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting and replacing the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
6. This time, unplug the USB stick, uninstall the 3 dashboards yung smartbro na dashboard, etisalat,and movistar na dashboard, then clean / fixed registry using ccleaner na software or any software alike. You can restart your computer after uninstalling all 3 softwares to prepare for fresh install once ireplug natin ang USB Stick.
7. Ikabit ang USB Stick na MAY IBANG SIM maliban sa smartbro. Then mag-ooautorun sya para mainstall ang dashboard na SmartBro at corresponding Drivers. You will be amazed na accepted ang sim and merong signal. OPENLINE na SmartBro ZTE MF190 Stick mo mga pre! Cheers! ASTIG!
Download Files here:
http://www.mediafire.com/?m62t8dv0w7v4sdb
http://www.mediafire.com/?bmhwrq2hzo67gv3
http://www.mediafire.com/?ljaojkg2f1syq3t
ito naman po ang aking idinagdag sarile ko po ito diskobre para po kung sakaling humina ang signal matapos mag unlock...pake sundan nalang po ang pag kaka sunod-sunod
step1.firmware zte mf190
download here
http://www.4shared.com/rar/gGFvak9T/...americano.html
step2.extrct nyo matapos mai download
step3. Open QPST Configuration
Click "Add New Port"
select the port of your USB Modem
then click OK. You should see there SURFXXXX under Phone column.
Click "Start Client" (nasa taas menu bar)
click "EFS Explorer". You will see there the port with "SURFXXXX" na label
click OK. You will be presented with folders and files.
Do not touch the folders. Just to be sure,
save a copy of the following files before you delete them, 9 files all in all (this will serve as your original SmartBro MF190 Files). You can save a copy by highlighting all the files then right click. After saving a backup, DELETE the listed files.
1. config
2. reset_cntr.bin
3. pbm_phone_uid.dat
4. pbm_master_v_20.dat
5. ZTEMODEM.ISO
6. UimEfsAPDULog.Txt
7. NODOWNLOAD.FLG
8. SWITCH.TMP
9. AUTORUN.FLG
After deleting the files, close "EFS Explorer". You will be prompted to reset the device, just choose "No". Close "QPST Configuration".
step4.This time update firmware using “firmware zte mf190 ” file (20-25mins.). Double click the file, wait for it to detect the device then proceed. After ma update, the device will reset automatically and will install the dashboard na "dtac aircard" and will ask for the drivers again. Still follow the same process. Now, dashboards will pop-up, dtac aircard. Let the dashboards pop-up then simply close/exit
step5.unplug mo zte mf190 m0
step6.uninstall smartbro dashboard
step7.use ccleaner or kahit anong cleaner to clean your registry
step8.replug zte mf190 den okey na po yan..balik sa dating signal yang zte mf190 mo...mas malakas pa signal kesa sa original na firmware...and dashboard is good looking...
ito naman po ang aking screenshot
