Unbricking 
Console Tool Method
JTAG po gagawin natin, di ko kasi mapagana TFTP method sa router ko, pero try niyo, kasi sabi ng iba working pero in my case hindi
Edit: btw, habang nageexplore ako sa Windows Features, may nakita ako dun na TFTP, naka untick akin, kaya siguro ayaw gumana yung TFTP method sakin di ko pa siya na try kaya try niyo nalang
This tutorial will only apply in Windows OS (Apple product sucks, I really love Linux
)
Ok let's start with the requirements:
Code:
1. Brick Router
2. PL2303 usb to ttl converter: [URL="http://www.e-gizmo.com/KIT/USB.htm"]Dito pede kayo bumili[/URL]
3. Putty :
[URL]http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html[/URL]
4. Common Sense :D
Download PL2303 Driver at their website:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41
Then plug the pl2303 cables to the router then plug in to your PC/Laptop.
Cable Layout (credits to the owner of the images) wala na ko time para i baklas kabit router ko, nakakatamad
:
CW5356u:
Pin 1 to Pin 4, From Left to Right
http://2.bp.blogspot.com/-GX0fAp983q8/UT5TvVXOW6I/AAAAAAAAHjA/i7nPtI7-rLY/s640/console_tools.jpg
CW 5358u
Pin 1 to Pin 4, From Left to Right also
http://1.bp.blogspot.com/-1MMy3dJUHvQ/UT5Q8X7NLII/AAAAAAAAHi8/fr4frbiRQfc/s640/DSC02603.jpg
Next, Setting up recovery:
Diba before nirequire ko kayo iinstall ang driver para ma communicate natin yung router via serial connection.
After niyo i plug yung converter sa USB, mag iinstall yan wait niyo lang matapos then go to device manager for us to check what com port yung converter niyo.
http://www.symbianize.com/attachment.php?attachmentid=742152&stc=1&d=1366500098
As you can see at my ss, nasa com7 siya nakasaksak, gagamitin natin yan later.
Setting up putty for serial communication:
Click serial tab
Set serial line to the com port na nakita mo sa device manager mo (In my case, com7)
Set speed from 9600 to 115200
Then click open
Mag oopen na yung console as long as naka connect na yung converter and naka on yung router
http://www.symbianize.com/attachment.php?attachmentid=742154&stc=1&d=1366500804
Entering recovery mode and recovery GUI:
Diba before, in order na ma open mo yung console ng putty e naka on yung router, if na open mo na yung putty pede na nating irestart, kailangan mabilis na dito, ang goal natin is to stop the booting process to recovery mode in order to access the recovery GUI
I restart mo na yung router, kailangan eto lalabas na mga text sa console, pag labas ng mga yan press CTRL+C para ma stop ang boot, spam mo medyo delay kasi respond nan, para sure ma stop yung process.
Sa ss, may makikita kayo na apat na C dun sa console, it means apat na beses niya pinress yung CTRL+C to stop the process, kasi delay mag rerespond ang consolem kaya hanggat maari i spam mo siya. (pasensya na malabo yung pic, papalitan ko nalang pag nag ka time)
http://www.symbianize.com/attachment.php?attachmentid=742156&stc=1&d=1366501439
Ngaun na stop na natin yung process of booting, saksak mo ngaun yung LAN Cable sa Lan 1 ng router mo and dun sa LAN port ng PC/Laptop mo, tapos change natin yung IP address ng LAN Adapter mo
Check ulit SS, As you can see sa encircled text na kailangan yun yung default gateway ng LAN Adapter mo in order to access yung Web GUI niya
http://www.symbianize.com/attachment.php?attachmentid=742159&stc=1&d=1366501739
Change na natin IP Address and Default Gateway nung LAN Adapter mo, Open network and sharing center then click change adapter settings at the upper left part ng window
Follow the SS for settings
In my case, my LAN Adapter is the Broadcom gigabit ethernet port, ewan ko sa inyo, basta explore
And yung Default Gateway e finollow ko lang yung nasa SS para di kayo malito, sa case ko nun kasi 192.168.1.1, e yung nasa SS is 192.168.11.1 kaya yun nilagay ko, siguro depende yun sa last fw na finlash mo, kasi toastman build ginamit ko nun
http://www.symbianize.com/attachment.php?attachmentid=742161&stc=1&d=1366502188
After that, you can access na yung recovery GUI sa browser, Itype niyo yung Default Gateway na lumabas dun sa console na nilagay niyo dun sa LAN Adapter
sa GUI, click niyo "Restore default NVRAM values" muna to ensure clean install then browse niyo yung FW na iflaflash niyo, mas maganda balik stock kayo, Check niyo first page for download links ng FW, then click upload.
After that, ok na ulit router niyo, PARTY PARTY na
You can restore the default settings nung LAN Adapter niyo sa automatically obtain IP Address
TFTP Method
This method is quoted from sir xtechnouser post:
